scholarly journals A Balloonborne Particle Size, Imaging, and Velocity Probe for in Situ Microphysical Measurements

2015 ◽  
Vol 32 (9) ◽  
pp. 1562-1580 ◽  
Author(s):  
Sean M. Waugh ◽  
Conrad L. Ziegler ◽  
Donald R. MacGorman ◽  
Sherman E. Fredrickson ◽  
Doug W. Kennedy ◽  
...  
Keyword(s):  
Particle Size ◽  
Video Camera ◽  
Cloud Microphysics ◽  
High Definition ◽  
Spatiotemporal Resolution ◽  
Winter Storms ◽  
Convective Clouds ◽  
Chemistry Experiment ◽  
Initial Results

AbstractA balloonborne instrument known as the Particle Size, Image, and Velocity (PASIV) probe has been developed at the National Severe Storms Laboratory to provide in situ microphysical measurements in storms. These observations represent a critical need of microphysics observations for use in lightning studies, cloud microphysics simulations, and dual-polarization radar validation. The instrument weighs approximately 2.72 kg and consists of a high-definition (HD) video camera, a camera viewing chamber, and a modified Particle Size and Velocity (Parsivel) laser disdrometer mounted above the camera viewing chamber. Precipitation particles fall through the Parsivel sampling area and then into the camera viewing chamber, effectively allowing both devices to sample the same particles. The data are collected on board for analysis after retrieval. Taken together, these two instruments are capable of providing a vertical profile of the size, shape, velocity, orientation, and composition of particles along the balloon path within severe weather.The PASIV probe has been deployed across several types of weather environments, including thunderstorms, supercells, and winter storms. Initial results from two cases in the Deep Convective Clouds and Chemistry Experiment are shown that demonstrate the ability of the instrument to obtain high-spatiotemporal- resolution observations of the particle size distributions within convection.

scholarly journals Ice particles in the upper anvil regions of midlatitude continental thunderstorms: the case for frozen-drop aggregates

2014 ◽  
Vol 14 (4) ◽  
pp. 1973-1985 ◽  
Author(s):  
J. L. Stith ◽  
L. M. Avallone ◽  
A. Bansemer ◽  
B. Basarab ◽  
S. W. Dorsi ◽  
...  
Keyword(s):  
Doppler Radar ◽  
The United States ◽  
Convective Clouds ◽  
Large Particles ◽  
Ice Water Content ◽  
High Concentrations ◽  
Particle Imaging ◽  
Ice Water ◽  
Chemistry Experiment

Abstract. This study examines the occurrence and morphology of frozen-drop aggregates in thunderstorm anvils from the United States Midwest and describes the environmental conditions where they are found. In situ airborne data collected in anvils using several particle imaging and sizing probes and bulk total water instrumentation during the 2012 Deep Convective Clouds and Chemistry experiment are examined for the presence of frozen-drop aggregates. Chains of frozen drops have been only rarely reported before and are hypothesized to aggregate due to electrical forces in the clouds. They were identified in nine of the anvil cases examined to date, suggesting that they are common features in these Midwestern anvils. High concentrations of individual frozen droplets occurred on the tops and edges of one particular set of anvils, while regions closer to the center and bottom of these anvils exhibited fewer frozen drops and more frozen-drop aggregates. Bulk ice water content measurements across these anvils could only be explained by contributions from both small particles (frozen droplets) and large particles (large aggregates of frozen droplets). Dual Doppler radar analysis confirmed the presence of deep and strong (> 15 m s−1) updrafts in the parent cloud of one of the anvils. These features contrast with previous anvil measurements in tropical/maritime anvils that evidently do not exhibit the same frequency of frozen-drop aggregates.

General Macro- and Microphysical Properties of Deep Convective Clouds as Observed by MODIS

2010 ◽  
Vol 23 (13) ◽  
pp. 3457-3473 ◽  
Author(s):  
Tianle Yuan ◽  
Zhanqing Li
Keyword(s):  
Particle Size ◽  
Brightness Temperature ◽  
Remote Sensing Data ◽  
Cloud Microphysics ◽  
Radiation Budget ◽  
Thermodynamic Consideration ◽  
Convective Clouds ◽  
Microphysical Properties ◽  
Geographical Regions ◽  
Deep Convective Clouds

Abstract Deep convective clouds (DCCs) are an important player in the climate system. In this paper the authors use remote sensing data mainly from the Moderate Resolution Imaging Spectroradiometer (MODIS) cloud product to investigate a few general cloud macro- and microphysical properties of DCCs. This investigation concentrates on the tallest convective clouds and associated thick anvils that are labeled “deep convective clouds.” General geographical patterns of DCCs from MODIS data are consistent with previous studies. By examining statistics of optical properties of DCCs over different locations of the globe, it is found that cloud optical depth distribution for DCCs shows little interannual variability for individual regions. These distributions, however, change with geographical regions. DCC ice particle size varies with surface elevation and cloud brightness temperature. DCCs that develop over elevated areas tend to have smaller ice particles at cloud top. There is a positive correlation between ice particle size and brightness temperature. The slope of this correlation has significant regional variations, which can be explained either with a simple thermodynamic consideration or with homogeneous freezing of aerosols. The findings have important implications in studying radiation budget, ice cloud microphysics parameterization, and troposphere–stratosphere water vapor exchange.

scholarly journals Ice particles in the upper anvil regions of mid-latitude continental thunderstorms: the case for frozen-drop aggregates

2013 ◽  
Vol 13 (10) ◽  
pp. 27019-27052 ◽  
Author(s):  
J. L. Stith ◽  
L. Avallone ◽  
A. Bansemer ◽  
B. Basarab ◽  
S. W. Dorsi ◽  
...  
Keyword(s):  
Doppler Radar ◽  
Convective Clouds ◽  
The Us ◽  
Large Particles ◽  
Ice Water Content ◽  
High Concentrations ◽  
Particle Imaging ◽  
Ice Water ◽  
Chemistry Experiment

Abstract. This study examines the occurrence and morphology of frozen drop aggregates in thunderstorm anvils from the US Midwest and describes the environmental conditions where they are found. In situ airborne data collected in anvils using several particle imaging and sizing probes and bulk total water instrumentation during the 2012 Deep Convective Clouds and Chemistry Experiment are examined for the presence of frozen drop aggregates. These types of particles, especially chains of frozen drops, have been only rarely reported before and are hypothesized to aggregate due to electrical forces in the clouds. They were identified in nine of the anvil cases examined to-date, suggesting that they are common features in Midwestern anvils. High concentrations of individual frozen droplets occurred on the tops and edges of one particular set of anvils, while regions closer to the center and bottom of the anvils exhibited fewer frozen drops and more frozen drop aggregates. Bulk ice water content measurements across these anvils could only be explained by contributions from both small particles (frozen droplets) and large particles (large aggregates of frozen droplets). Dual Doppler radar analysis confirmed the presence of deep and strong (> 15 m s−1) updrafts in the parent cloud of one of the anvils. These features contrast with previous anvil measurements in tropical/maritime anvils that evidently do not exhibit the same frequency of frozen drop aggregates.

Novel Formulation Development and Evaluation of Nanoparticles Based in Situ Gelling System for The Ophthalmic Delivery of Ciprofloxacin Hydrochloride

2015 ◽  
Vol 5 (4) ◽  
Author(s):  
Kranti Singh ◽  
Surajpal Verma ◽  
Shyam Prasad ◽  
Indu Bala
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Drug Loading ◽  
In Vitro Release ◽  
Formulation Development ◽  
Ciprofloxacin Hydrochloride ◽  
Potential Value ◽  
The Mean ◽  
In Situ Gelling

Ciprofloxacin hydrochloride loaded Eudragit RS100 nanoparticles were prepared by using w/o/w emulsification (multiple emulsification) solvent evaporation followed by drying of nanoparticles at 50°C. The nanoparticles were further incorporated into the pH-triggered in situ gel forming system which was prepared using Carbopol 940 in combination with HPMC as viscosifying agent. The developed nanoparticles was evaluated for particle size, zeta potential value and loading efficiency; nanoparticle incorporated in situ gelling system was evaluated for pH, clarity, gelling strength, rheological studies, in-vitro release studies and ex-vivo precorneal permeation studies. The nanopaticle showed the mean particle size varying between 263.5nm - 325.9 nm with the mean zeta potential value of -5.91 mV to -8.13 mV and drug loading capacity varied individually between 72.50% to 98.70% w/w. The formulation was clear with no suspended particles, showed good gelling properties. The gelling was quick and remained for longer time period. The developed formulation was therapeutically efficacious, stable and non-irritant. It provided the sustained release of drug over a period of 8-10 hours.

scholarly journals Rapid evolution and host immunity drive the rise and fall of carbapenem resistance during an acute Pseudomonas aeruginosa infection

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Rachel Wheatley ◽  
Julio Diaz Caballero ◽  
Natalia Kapel ◽  
Fien H. R. de Winter ◽  
Pramod Jangir ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Efflux Pump ◽  
Rapid Evolution ◽  
Carbapenem Resistance ◽  
Host Immunity ◽  
High Definition ◽  
Loss Of Resistance ◽  
Pseudomonas Aeruginosa Infection ◽  
Second Wave

AbstractIt is well established that antibiotic treatment selects for resistance, but the dynamics of this process during infections are poorly understood. Here we map the responses of Pseudomonas aeruginosa to treatment in high definition during a lung infection of a single ICU patient. Host immunity and antibiotic therapy with meropenem suppressed P. aeruginosa, but a second wave of infection emerged due to the growth of oprD and wbpM meropenem resistant mutants that evolved in situ. Selection then led to a loss of resistance by decreasing the prevalence of low fitness oprD mutants, increasing the frequency of high fitness mutants lacking the MexAB-OprM efflux pump, and decreasing the copy number of a multidrug resistance plasmid. Ultimately, host immunity suppressed wbpM mutants with high meropenem resistance and fitness. Our study highlights how natural selection and host immunity interact to drive both the rapid rise, and fall, of resistance during infection.

scholarly journals Mapping High Spatiotemporal-Resolution Soil Moisture by Upscaling Sparse Ground-Based Observations Using a Bayesian Linear Regression Method for Comparison with Microwave Remotely Sensed Soil Moisture Products

2021 ◽  
Vol 13 (2) ◽  
pp. 228
Author(s):  
Jian Kang ◽  
Rui Jin ◽  
Xin Li ◽  
Yang Zhang
Keyword(s):  
Soil Moisture ◽  
Large Scale ◽  
Spatial Scales ◽  
Microwave Remote Sensing ◽  
In Situ Measurements ◽  
Spatial Density ◽  
Linear Regression Method ◽  
Spatiotemporal Resolution ◽  
Pixel Scale

In recent decades, microwave remote sensing (RS) has been used to measure soil moisture (SM). Long-term and large-scale RS SM datasets derived from various microwave sensors have been used in environmental fields. Understanding the accuracies of RS SM products is essential for their proper applications. However, due to the mismatched spatial scale between the ground-based and RS observations, the truth at the pixel scale may not be accurately represented by ground-based observations, especially when the spatial density of in situ measurements is low. Because ground-based observations are often sparsely distributed, temporal upscaling was adopted to transform a few in situ measurements into SM values at a pixel scale of 1 km by introducing the temperature vegetation dryness index (TVDI) related to SM. The upscaled SM showed high consistency with in situ SM observations and could accurately capture rainfall events. The upscaled SM was considered as the reference data to evaluate RS SM products at different spatial scales. In regard to the validation results, in addition to the correlation coefficient (R) of the Soil Moisture Active Passive (SMAP) SM being slightly lower than that of the Climate Change Initiative (CCI) SM, SMAP had the best performance in terms of the root-mean-square error (RMSE), unbiased RMSE and bias, followed by the CCI. The Soil Moisture and Ocean Salinity (SMOS) products were in worse agreement with the upscaled SM and were inferior to the R value of the X-band SM of the Advanced Microwave Scanning Radiometer 2 (AMSR2). In conclusion, in the study area, the SMAP and CCI SM are more reliable, although both products were underestimated by 0.060 cm3 cm−3 and 0.077 cm3 cm−3, respectively. If the biases are corrected, then the improved SMAP with an RMSE of 0.043 cm3 cm−3 and the CCI with an RMSE of 0.039 cm3 cm−3 will hopefully reach the application requirement for an accuracy with an RMSE less than 0.040 cm3 cm−3.

Effect of particle size on in-situ desulfurization for oxy-fuel CFBC

Fuel ◽  
2021 ◽  
Vol 291 ◽  
pp. 120270
Author(s):  
Seo Yeong Kang ◽  
Su Been Seo ◽  
Eun Sol Go ◽  
Hyung Woo Kim ◽  
Sang In Keel ◽  
...  
Keyword(s):  
Particle Size ◽  
Effect Of Particle Size

scholarly journals Effects of processing, moisture, and storage length on the fermentation profile, particle size, and ruminal disappearance of reconstituted corn grain

2020 ◽  
Vol 98 (11) ◽  
Author(s):  
Ana L M Gomes ◽  
Antonio V I Bueno ◽  
Fernando A Jacovaci ◽  
Guilherme Donadel ◽  
Luiz F Ferraretto ◽  
...  
Keyword(s):  
Particle Size ◽  
Lactic Acid ◽  
Butyric Acid ◽  
Hammer Mill ◽  
Moisture Concentration ◽  
Fermentation Profile ◽  
And Storage ◽  
Ground Corn ◽  
Corn Grain

Abstract Our objective was to examine the effects of processing, moisture, and anaerobic storage length of reconstituted corn grain (RCG) on the fermentation profile, geometric mean particle size (GMPS), and ruminal dry matter disappearance (DMD). Dry corn kernels were ground (hammer mill, 5-mm screen) or rolled, then rehydrated to 30%, 35%, or 40% moisture, and stored for 0, 14, 30, 60, 90, 120, or 180 d in laboratory silos. Rolled corn had an increased GMPS compared with ground corn (2.24 and 1.13 mm, respectively, at ensiling). However, there was a trend for an interaction between processing and moisture concentration to affect particle size, with GMPS increasing with increased moisture concentration, especially in ground corn. Longer storage periods also slightly increased GMPS. Processing, moisture, and storage length interacted to affect the fermentation pattern (two- or three-way interactions). Overall, pH decreased, whereas lactic acid, acetic acid, ethanol, and NH3-N increased with storage length. RCG with 30% moisture had less lactic acid than corn with 35% and 40% moisture, indicating that fermentation might have been curtailed and also due to the clostridial fermentation that converts lactic acid to butyric acid. Ensiling reconstituted ground corn with 30% of moisture led to greater concentrations of ethanol and butyric acid, resulting in greater DM loss than grain rehydrated to 35% or 40% of moisture. Ammonia-N and in situ ruminal DMD were highest for reconstituted ground corn with 35% or 40% of moisture, mainly after 60 d of storage. Therefore, longer storage periods and greater moisture contents did not offset the negative effect of greater particle size on the in situ ruminal DMD of rolled RCG. Nonetheless, RCG should be ensiled with more than 30% moisture and stored for at least 2 mo to improve the ruminal DMD and reduce the formation of ethanol and butyric acid.

scholarly journals In Situ Synthesis of Core-Shell-Structured SiCp Reinforcements in Aluminium Matrix Composites by Powder Metallurgy

Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1201
Author(s):  
Xinghua Ji ◽  
Cheng Zhang ◽  
Shufeng Li
Keyword(s):  
Particle Size ◽  
Powder Metallurgy ◽  
Shell Structure ◽  
Ex Situ ◽  
Aluminium Matrix ◽  
Core Shell ◽  
Matrix Composites ◽  
Aluminium Matrix Composites ◽  
Core Shell Structure

SiCp reinforced aluminium matrix composites (AMCs), which are widely used in the aerospace, automotive, and electronic packaging fields along with others, are usually prepared by ex situ techniques. However, interfacial contamination and poor wettability of the ex situ techniques make further improvement in their comprehensive performance difficult. In this paper, SiCp reinforced AMCs with theoretical volume fractions of 15, 20, and 30% are prepared by powder metallurgy and in situ reaction via an Al-Si-C system. Moreover, a combined method of external addition and an in situ method is used to investigate the synergistic effect of ex situ and in situ SiCp on AMCs. SiC particles can be formed by an indirect reaction: 4Al + 3C → Al4C3 and Al4C3 + 3Si → 3SiC + 4Al. This reaction is mainly through the diffusion of Si, in which Si diffuses around Al4C3 and then reacts with Al4C3 to form SiCp. The in situ SiC particles have a smooth boundary, and the particle size is approximately 1–3 μm. A core-shell structure having good bonding with an aluminium matrix was generated, which consists of an ex situ SiC core and an in situ SiC shell with a thickness of 1–5 μm. The yield strength and ultimate tensile strength of in situ SiCp reinforced AMCs can be significantly increased with a constant ductility by adding 5% ex situ SiCp for Al-28Si-7C. The graphite particle size has a significant effect on the properties of the alloy. A criterion to determine whether Al4C3 is a complete reaction is achieved, and the forming mechanism of the core-shell structure is analysed.

Sign in / Sign up

Export Citation Format

Share Document