scholarly journals Composite modular floor prototype for emergency housing applications: Experimental and analytical approach

2017 ◽  
Vol 52 (13) ◽  
pp. 1747-1764 ◽  
Author(s):  
Hassan Abdolpour ◽  
Julio Garzón-Roca ◽  
Gonçalo Escusa ◽  
José M Sena-Cruz ◽  
Joaquim AO Barros ◽  
...  
Keyword(s):  
Glass Fibre ◽  
Sandwich Panels ◽  
Experimental Tests ◽  
Frame Structure ◽  
Reinforced Polymer ◽  
Glass Fibre Reinforced Polymer ◽  
Connection System ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced ◽  
Flexural Tests

The present paper explores a new modular floor prototype to be used in emergency houses. The prototype is composed of a frame structure made of glass-fibre-reinforced polymer tubular pultruded profiles, a slab made of sandwich panels with a polyurethane foam core and glass-fibre-reinforced polymer skins, and a tailored connection system that provides integrity between assembled components. A series of experimental tests are carried out including flexural tests on a single panel, on two and three connected panels, and on the assembled floor prototype. The behaviour of the panels is analysed when they are not considered part of the glass-fibre-reinforced polymer framed structure, namely the failure mechanisms and the efficiency of the proposed connection system between the panels. The performance of the floor prototype to support typical load conditions of residential houses is also assessed. Additionally, an analytical model was used to deeper study the behaviour of the developed sandwich panels, connection system and the modular floor prototype.

Parametric finite element analysis of a glass fibre reinforced polymer (GFRP) deck-to-girder connection for bridges

2006 ◽  
Vol 33 (3) ◽  
pp. 245-254 ◽  
Author(s):  
Ki-Tae Park ◽  
Sang-Hyo Kim ◽  
Hyeong-Yeol Kim ◽  
Sun-Myung Kim
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Glass Fibre ◽  
Bridge Decks ◽  
Element Analysis ◽  
Reinforced Polymer ◽  
Glass Fibre Reinforced Polymer ◽  
Connection System ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced

This paper presents a new method for deck-to-girder connections of glass fibre reinforced polymer (GFRP) bridge decks. To design the connection system, a GFRP deck in a rectangular cross-sectional shape is considered. The size of the shear bolts, bolt location, bolt spacing, and the size and type of stiffening plate are the variables considered in the design. The behavior of the proposed deck-to-girder connection system was analysed using commercial finite element analysis software. The failure of the connection system was checked by the Tsai–Hill criterion. Effective deck-to-girder connection details for GFRP bridge decks are identified and presented based on the results of the analysis.Key words: bridge decks, glass fibres, bolted connections, pultrusion.

Elastic and viscoelastic behaviour of sandwich panels with glass-fibre reinforced polymer faces and polyethylene terephthalate foam core

2016 ◽  
Vol 20 (4) ◽  
pp. 399-424 ◽  
Author(s):  
Mário Garrido ◽  
João R Correia
Keyword(s):  
Polyethylene Terephthalate ◽  
Glass Fibre ◽  
Creep Behaviour ◽  
Sandwich Panels ◽  
Full Scale ◽  
Foam Core ◽  
Reinforced Polymer ◽  
Glass Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced

This paper presents experimental and analytical investigations about the elastic and viscoelastic (creep) behaviour of sandwich panels made of glass-fibre reinforced polymer faces and a polyethylene terephthalate foam core, produced by vacuum infusion for civil engineering structural applications. First, the elastic response of the panels’ constituent materials (glass-fibre reinforced polymer and polyethylene terephthalate) in tension, compression and shear was experimentally assessed; shear tests on the foam were carried out using a novel test method, the diagonal tension shear test. The creep behaviour in shear of the polyethylene terephthalate foam was evaluated for different load levels. The effective flexural properties of the full-scale sandwich panels as well as their flexural behaviour up to failure were experimentally assessed. Flexural creep and subsequent recovery experiments were also conducted for different load levels, to characterise the viscoelastic behaviour of the full-scale sandwich panels. Creep deformations of the polyethylene terephthalate foam and of the sandwich panels were found to be significantly lower than those corresponding to polyurethane foam and balsa wood reported in the literature; unrecoverable viscoelastic deformations were observed in the full-scale panels. In the analytical study, the creep response of the panels was modelled using Findley’s power law and the composite creep modelling approach. The composite creep modelling predictions were reasonably accurate and allowed assessing the relative contributions of bending and shear deformations to the total sandwich panel creep deflections.

scholarly journals Thermal Delamination Modelling and Evaluation of Aluminium–Glass Fibre-Reinforced Polymer Hybrid

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 492
Author(s):  
Zhen Pei Chow ◽  
Zaini Ahmad ◽  
King Jye Wong ◽  
Seyed Saeid Rahimian Koloor ◽  
Michal Petrů
Keyword(s):  
Crack Front ◽  
Cohesive Zone ◽  
Experimental Tests ◽  
Mode I ◽  
Mode Ii ◽  
Cohesive Model ◽  
Reinforced Polymer ◽  
Glass Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced

This paper aims to propose a temperature-dependent cohesive model to predict the delamination of dissimilar metal–composite material hybrid under Mode-I and Mode-II delamination. Commercial nonlinear finite element (FE) code LS-DYNA was used to simulate the material and cohesive model of hybrid aluminium–glass fibre-reinforced polymer (GFRP) laminate. For an accurate representation of the Mode-I and Mode-II delamination between aluminium and GFRP laminates, cohesive zone modelling with bilinear traction separation law was implemented. Cohesive zone properties at different temperatures were obtained by applying trends of experimental results from double cantilever beam and end notched flexural tests. Results from experimental tests were compared with simulation results at 30, 70 and 110 °C to verify the validity of the model. Mode-I and Mode-II FE models compared to experimental tests show a good correlation of 5.73% and 7.26% discrepancy, respectively. Crack front stress distribution at 30 °C is characterised by a smooth gradual decrease in Mode-I stress from the centre to the edge of the specimen. At 70 °C, the entire crack front reaches the maximum Mode-I stress with the exception of much lower stress build-up at the specimen’s edge. On the other hand, the Mode-II stress increases progressively from the centre to the edge at 30 °C. At 70 °C, uniform low stress is built up along the crack front with the exception of significantly higher stress concentrated only at the free edge. At 110 °C, the stress distribution for both modes transforms back to the similar profile, as observed in the 30 °C case.

scholarly journals The Effect of Layers and Bullet Type on Impact Properties of Glass Fibre Reinforced Polymer (GFRP) Using a Single Stage Gas Gun (SSGG)

2014 ◽  
Vol 564 ◽  
pp. 428-433 ◽  
Author(s):  
S.N.A. Safri ◽  
Mohamed Thariq Hameed Sultan ◽  
N. Razali ◽  
Shahnor Basri ◽  
Noorfaizal Yidris ◽  
...  
Keyword(s):  
Impact Energy ◽  
Glass Fibre ◽  
Impact Test ◽  
Single Stage ◽  
Gas Gun ◽  
Reinforced Polymer ◽  
Glass Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced ◽  
The Impact

The purpose of this work is to study the best number of layer with the higher impact energy using Glass Fibre Reinforced Polymer (GFRP). The number of layers used in this study was 25, 33, 41, and 49. The impact test was performed using Single Stage Gas Gun (SSGG) for each layers given above with different bullets such as blunt, hemispherical and conical bullets. The gas gun pressure was set to 5, 10, 15 and 20 bar. All of the signals captured from the impact test were recorded using a ballistic data acquisition system. The correlation between the impact energy in terms of number of layer and type of bullet from this test are presented and discussed. It can be summarise that as the number of layer increases, impact energy also increases. In addition, from the results, it was observed that by using different types of bullets (blunt, hemispherical, conical), there is only a slight difference in values of energy absorbed by the specimen.

Quasi-Static Indentation Behaviour of Glass Fibre Reinforced Polymer

2014 ◽  
Vol 970 ◽  
pp. 317-319 ◽  
Author(s):  
Syed Mohd Saiful Azwan ◽  
Yahya Mohd Yazid ◽  
Ayob Amran ◽  
Behzad Abdi
Keyword(s):  
Glass Fibre ◽  
Polyester Resin ◽  
Loading Rates ◽  
Reinforced Polymer ◽  
Glass Fibre Reinforced Polymer ◽  
Static Indentation ◽  
Indentation Tests ◽  
Fibre Reinforced Polymer ◽  
Glass Fibre Reinforced ◽  
Chopped Strand Mat

Fibre reinforced polymer (FRP) plates subject to quasi-static indentation loading were studied. The plates were fabricated from three layers of chopped strand mat glass fibre and polyester resin using vacuum infusion process. Indentation tests were conducted on the plates with loading rates of 1 mm/min, 10 mm/min, 100 mm/min and 500 mm/min using a hemispherical tip indenter with diameter 12.5 mm. The plates were clamped in a square fixture with an unsupported space of 100 mm × 100 mm. The loads and deflections at the indented location were measured to give energy absorption-deflection curves. The results showed that the loading rate has a large effect on the indentation behaviour and energy absorbed.

Sign in / Sign up

Export Citation Format

Share Document