Evaluating the Operational Effect of Narrow Lanes and Shoulders for the Highway Capacity Manual

2019 ◽  
Vol 2673 (10) ◽  
pp. 558-570 ◽  
Author(s):  
Alexandra Kondyli ◽  
David K. Hale ◽  
Mohamadamin Asgharzadeh ◽  
Bastian Schroeder ◽  
Anxi Jia ◽  
...  
Keyword(s):  
Traffic Congestion ◽  
Flow Speed ◽  
Mitigation Strategies ◽  
Analytical Models ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Lane Width ◽  
Adjustment Factors ◽  
Manual Methods ◽  
Width Reduction

Unnecessary traffic delays and vehicle emissions have adverse effects on quality of life. To solve the traffic congestion problem in the U.S.A., mitigation or elimination of bottlenecks is a top priority. Agencies across the U.S.A. have deployed several congestion mitigation strategies, such as lane and shoulder width reduction, which aim to adding lanes without significantly altering the footprint of the freeway. A limited number of studies have evaluated the operational benefits of lane narrowing. Although the Highway Capacity Manual does account for lane and shoulder widths, the adjustments that it provides are outdated. The goal of this research was to develop analytical models, compatible with the Highway Capacity Manual methods, to account for lane and shoulder width narrowing, using field data from across the U.S.A. This paper presents a new free-flow speed regression model, which accounts for lane and shoulder widths, and capacity adjustment factors depending on the lane width.

scholarly journals An Analysis of the Interactions between Adjustment Factors of Saturation Flow Rates at Signalized Intersections

2020 ◽  
Vol 12 (2) ◽  
pp. 665 ◽  
Author(s):  
Yi Wang ◽  
Jian Rong ◽  
Chenjing Zhou ◽  
Xin Chang ◽  
Siyang Liu
Keyword(s):  
Traffic Congestion ◽  
National Standard ◽  
Percentage Error ◽  
Heavy Vehicles ◽  
Highway Capacity ◽  
Left Turn ◽  
Highway Capacity Manual ◽  
Lane Width ◽  
Adjustment Factors ◽  
Saturation Flow

An insufficient functional relationship between adjustment factors and saturation flow rate (SFR) in the U.S. Highway Capacity Manual (HCM) method increases an additional prediction bias. The error of SFR predictions can reach 8–10%. To solve this problem, this paper proposes a comprehensive adjusted method that considers the effects of interactions between factors. Based on the data from 35 through lanes in Beijing and 25 shared through and left-turn lanes in Washington, DC, the interactions between lane width and percentage of heavy vehicles and proportion of left-turning vehicles were analyzed. Two comprehensive adjustment factor models were established and tested. The mean absolute percentage error (MAPE) of model 1 (considering the interaction between lane width and percentage of heavy vehicles) was 4.89% smaller than the MAPE of Chinese National Standard method (Standard Number is GB50647) at 13.64%. The MAPE of model 2 (considering the interaction between lane width and proportion of left-turning vehicles was 33.16% smaller than the MAPE of HCM method at 14.56%. This method could improve the accuracy of SFR prediction, provide support for traffic operation measures, alleviate the traffic congestion, and improve sustainable development of cities.

Effect of Lane Width on Speeds of Cars and Heavy Vehicles in Work Zones

2005 ◽  
Vol 1920 (1) ◽  
pp. 41-48 ◽  
Author(s):  
Madhav V. Chitturi ◽  
Rahim F. Benekohal
Keyword(s):  
Flow Speed ◽  
Heavy Vehicles ◽  
Work Zones ◽  
Passenger Cars ◽  
Highway Capacity ◽  
Speed Reduction ◽  
Interstate Highways ◽  
Highway Capacity Manual ◽  
Traffic Stream ◽  
Lane Width

Traffic data were collected from 11 work zones on Interstate highways in Illinois in which one of the two lanes was open. The reductions in free-flow speed (FFS) due to narrow lanes and lateral clearances in work zones were studied. It was found that the reductions in FFSs of vehicles in work zones because of narrow lanes were higher than the reductions given in the Highway Capacity Manual for basic freeway sections. The data also showed that the narrower the lane was, the greater the speed reduction was. The data showed that the FFSs of heavy vehicles were statistically lower than the FFSs of passenger cars, even though the speed limit was the same for both types of vehicles. In addition, the reduction in the FFSs of heavy vehicles was greater than the reduction in the FFSs of passenger cars. This greater reduction in the speed of heavy vehicles affected the performance of the traffic stream in work zones. Thus, it should be considered in the computation of the passenger car equivalence for heavy vehicles. It is recommended that 10, 7, 4.4, and 2.1 mph be used for speed reduction in work zones for lane widths of 10, 10.5, 11, and 11.5 ft, respectively.

scholarly journals Determination of Level of Service (LOS) on Different Roads in Kuching Area (A Case study)

2009 ◽  
Vol 1 (1) ◽  
pp. 1-6
Author(s):  
Chen K.C. ◽  
Larry S.T.
Keyword(s):  
Traffic Congestion ◽  
Urban Areas ◽  
Qualitative Assessment ◽  
Level Of Service ◽  
Heavy Vehicles ◽  
Traffic Light ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Lane Width ◽  
Traffic Composition

The concept of Level of Service (LOS) is originated from the Highway Capacity Manual (HCM). LOS is a qualitative assessment of the operational performance of a roadway facility based on quantitative performance measures. Many transportation infrastructure funding decisions are based on LOS analysis, and LOS designations are intended to represent user-perceived quality of service. This study has been carried out to determine the LOS on different roads. The profile of study area is in Kuching, Sarawak where five roads with different characteristics and posted speed of urban multilane with 80km/hr and 70km/hr, suburban two-lane two-way with 90 km/hr and 80km/hr had been selected for the studies. Substantial numbers of inputs are required for the LOS analysis and determination based on HCM procedures. These inputs are: a long list of traffic volume collected in different peak hours; traffic composition such as proportion of heavy vehicles in traffic; geometric characteristics such as number of lanes, lane width, shoulder width, and approach grades. Results of the study showed that LOS in the urban multilane is still in satisfactory range with LOS ranging from C to D except for most of the traffic congestion cases in urban multilane at the traffic light junctions and roundabouts. However, LOS in the suburban two-lane two-way is only satisfying in the range of LOS E; hence multilane should be introduced in such cases. Recommendations such as to provide various or multitude modes of transportation needs should be introduced in urban area. Furthermore, a suitable and efficient hierarchy in road system should be provided in suburban areas before turning into urban areas.

Application of Moving Car Observer Method for Measuring Free Flow Speed on Two-lane Highways

2014 ◽  
Vol 69 (6) ◽  
Author(s):  
Othman Che Puan ◽  
Muttaka Na’iya Ibrahim ◽  
Usman Tasiu Abdurrahman
Keyword(s):  
Field Measurement ◽  
Flow Speed ◽  
Operating Conditions ◽  
Free Flow ◽  
Geometric Features ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
Free Flow Speed ◽  
The Subject ◽  
Low Traffic

There exists a need to evaluate the performance indicator that reflects the current level of service (LOS) of the subject facility to justify any decision making on expenditures to be made for improving the performance level of a road facility. Free-flow speed (FFS) is one of the key parameters associated with LOS assessment for two-lane highways. Application of a more realistic approach for assessing road’s performance indicators would result in better estimates which could in turn suggest the most appropriate decision to be made (for situations where upgrading is needed); especially, in terms of finance, materials and human resources. FFS is the driver’s desired speed at low traffic volume condition and in the absence of traffic control devices. Its estimation is significant in the analysis of two-lane highways through which average travel speed (ATS); an LOS indicator for the subject road class is determined. The Highway Capacity Manual (HCM) 2010 offers an indirect method for field estimation of FSS based on the highway operating conditions in terms of base-free-flow-speed (BFFS). It is however, recommended by the same manual that direct field FSS measurement approach is most preferred. The Malaysian Highway Capacity Manual (MHCM) established a model for estimating FFS based on BFFS, the geometric features of the highway and proportion of motorcycles in the traffic stream. Estimating FFS based on BFFS is regarded as an indirect approach which is only resorted to, if direct field measurement proved difficult or not feasible. This paper presents the application of moving car observer (MCO) method for direct field measurement of FFS. Data for the study were collected on six segments of two-lane highways with varying geometric features. FFS estimates from MCO method were compared with those based on MHCM model. Findings from the study revealed that FFS values from MCO method seem to be consistently lower than those based on MHCM model. To ascertain the extent of the difference between the FFS values from the two approaches, student t-statistics was used. The t-statistics revealed a P–value of less than 0.05 (P < 0.05) which implies that there is a statistically significant difference between the two sets of data. Since MCO method was conducted under low traffic flow (most desired condition for field observation), it can be suggested that MCO estimates of FFS represent the actual scenario. A relationship was therefore developed between the estimates from the two methods. Thus, if the MHCM model is to be applied, the measured value needs to be adjusted based on the relationship developed between the two approaches.

Comparison of Planning and Operational Analysis Procedures for Signalized Intersections from the Highway Capacity Manual

1996 ◽  
Vol 1555 (1) ◽  
pp. 59-64
Author(s):  
Mark R. Virkler ◽  
Shashi Gannavaram ◽  
Anand Ramabhadran
Keyword(s):  
Level Of Service ◽  
Signal Timing ◽  
Highway Capacity ◽  
Operational Procedure ◽  
Highway Capacity Manual ◽  
Operational Analysis ◽  
Planning Procedure ◽  
Adjustment Factors ◽  
Cycle Lengths ◽  
Traffic Signal Timing

The 1994 update of the Highway Capacity Manual (HCM) includes a planning procedure to estimate the capacity condition of a signalized intersection (Xcm). The planning method results can also be extended to a planning application of the more data-intensive HCM operational procedure to estimate intersection critical flow-to-capacity ratio (Xc) and level of service with only planning-level data. Both the planning procedure and the planning application of the operational procedure involve default adjustment factors and synthesized traffic signal timing (called the “default signal timing”). Data from 166 Missouri intersections were used to determine how well the planning approaches predict operational analysis results. In general, the default signal timings had shorter cycle lengths than the timing plans used at pretimed signals. The shorter cycle lengths led to slightly higher flow-to-capacity ratios, since a higher proportion of each cycle was devoted to lost time. The default signal timings also had more equal flow-to-capacity ratios within critical lane groups. The shorter cycle lengths and more equal flow-to-capacity ratios led to a predicted level of service that was the same or better than that calculated for actual conditions. For the subject intersections, locally calibrated default adjustment factors yielded better predictions of flow-to-capacity ratios and level of service than the HCM defaults. The planning value for Xcm was often less than the actual Xc for operational analysis of actual conditions. This was to be expected since Xcm is based on the maximum allowable cycle length. The HCM planning procedure is expected to receive wide use in a variety of planning and design applications. Calibration of appropriate local default values should improve the accuracy of the planning procedure results.

Determining the capacity of the Canadian trans-mountain highway system

1976 ◽  
Vol 3 (3) ◽  
pp. 355-371
Author(s):  
John F. Morrall ◽  
Neville Cameron ◽  
Al Werner
Keyword(s):  
Highway Capacity ◽  
Passenger Car ◽  
Highway Capacity Manual ◽  
Recreational Vehicles ◽  
Improper Use ◽  
Adjustment Factors ◽  
Highway Planning ◽  
Design Hourly Volume ◽  
Selection Of

Trans-mountain highway capacity is sensitive to the percentage of recreational vehicles in the traffic stream, the manner in which passenger car equivalents for recreational vehicles are used in capacity computations, terrain classification, and the choice of design hourly volume. The sensitivity of capacity to these factors is demonstrated for the trans-mountain portion of the Trans-Canada highway which is a two-lane highway, characterized in many locations by long steep grades. This particular highway has a high percentage of recreational vehicles during summer months. The Highway Capacity Manual does not make any provision for the effect of such vehicles and previous highway planning studies have used the adjustment factors for trucks and buses to estimate their effect. Neglecting the effect of recreational vehicles and/or improper use of their passenger car equivalents in capacity computations can result in serious errors in the determination of highway capacity especially in mountainous areas. Further research is required in the areas of terrain definition, selection of design hourly volume, and the present concept of level of service.

scholarly journals PENGARUH SUKARELAWAN PENGATUR LALU LINTAS TERHADAP KINERJA SIMPANG TAK BERSINYAL GANESHA SURAKARTA

2019 ◽  
Vol 19 (2) ◽  
pp. 133-142
Author(s):  
Gus Maelan Irfana ◽  
Nurul Hidayati ◽  
Sri Sunarjono
Keyword(s):  
Traffic Control ◽  
Traffic Congestion ◽  
Motor Vehicle ◽  
Positive Influence ◽  
Degree Of Saturation ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
The Road ◽  
On The Road ◽  
The City

Abstract Traffic congestion in the City of Surakarta gave rise to a phenomenal figure among motor vehicle drivers, called the Traffic Control Volunteers or abbreviated as Supeltas. This Supeltas is present on the road to help organize the movement of traffic, as happened at the Surakarta Ganesha Unsignalized Intersection. This study aims to determine the influence of the existence of Supeltas on capacity, degree of saturation, delay, and queuing opportunities that occur at the intersection. The analysis was carried out using the 1997 Indonesian Highway Capacity Manual. The results showed that the intersection without Supeltas had a capacity of 3,114.03 pcu/hour and a degree of saturation of 1.47, while the same intersection but with Supeltas had a capacity of 3,136.81 pcu/hour and a degree of saturation of 1.51. These results indicate that Supeltas has a positive influence on the performance of the intersection. Nevertheless, the degree of saturation in the location increased due to the increase in traffic volume as well as increased capacity. Keywords: unsignalized intersection, intersection performance, intersection capacity, degree of saturation  Abstrak Kemacetan lalu lintas di Kota Surakarta memunculkan sosok fenomenal di kalangan pengendara kendaraan bermotor, yang disebut Sukarelawan Pengatur Lalu Lintas atau disingkat Supeltas. Supeltas ini hadir di jalan untuk membantu mengatur pergerakan lalu lintas, seperti yang terjadi di Simpang Tak Bersinyal Ganesha Surakarta. Penelitian ini bertujuan untuk menentukan pengaruh keberadaan Supeltas terhadap kapasitas, derajat kejenuhan, tundaan, dan peluang antrian yang terjadi di simpang tersebut. Analisis dilakukan dengan menggu-nakan Manual Kapasitas Jalan Indonesia 1997. Hasil analisis menunjukkan bahwa simpang tanpa Supeltas memiliki kapasitas sebesar 3.114,03 smp/jam dan derajat kejenuhan 1,47, sedangkan simpang yang sama tetapi dengan Supeltas memiliki kapasitas sebesar 3.136,81 smp/jam dan derajat kejenuhan 1,51. Hasil tersebut menunjukkan bahwa Supeltas mempunyai pengaruh positif terhadap kinerja simpang. Meskipun demikian, derajat kejenuhan di lokasi tersebut meningkat karena bertambahnya volume lalu lintas di samping kapasitas yang juga meningkat. Kata-kata kunci: simpang tak bersinyal, kinerja simpang, kapasitas simpang, derajat kejenuhan

Sensitivity Analysis of Speed Limit, Truck Lane Restrictions, and Data Aggregation Level on the HCM-6 Passenger Car Equivalent Estimation Methodology for Western U.S. Conditions

2019 ◽  
Vol 2673 (11) ◽  
pp. 493-504
Author(s):  
Jianan Zhou ◽  
Laurence Rilett ◽  
Elizabeth Jones
Keyword(s):  
Data Aggregation ◽  
Companion Paper ◽  
Flow Speed ◽  
Speed Limit ◽  
Passenger Cars ◽  
Highway Capacity ◽  
Passenger Car ◽  
Highway Capacity Manual ◽  
Negative Impacts ◽  
The Impact

In the 2016 Highway Capacity Manual (HCM-6), the impact of trucks on freeway operations is measured by passenger car equivalents (PCEs). PCEs are estimated by the equal capacity methodology. The HCM-6 PCE values are based on the assumptions that passenger cars and trucks travel at the same free-flow speed, that they travel on freeways with three lanes per direction, and that they travel in traffic with no more than 25% trucks. On Interstate 80 in western Nebraska, it is observed that the interaction of high truck percentages and large speed differences between passenger cars and trucks may result in moving bottlenecks. It was hypothesized that the current HCM-6 PCEs may be not appropriate for these conditions. A companion paper showed this was true and that the major cause was speed differentials between trucks and passenger cars. In essence, when slow-moving trucks pass each other they create moving bottlenecks, which results in increased PCE values. This paper is an extension to a companion paper and examines a number of issues related to estimation of PCEs. The paper examines the effect of speed limit, truck passing restrictions, and data aggregation interval on PCEs. The results show that: (i) if a higher speed limit is implemented, trucks will affect the passenger cars more severely; (ii) if truck passing is restricted by lane restrictions, the negative impacts of trucks on passenger car operation may be mitigated; and (iii) using a longer data aggregation interval results in lower PCE values, all else being equal.

scholarly journals Self-Organizing Tree Algorithm (SOTA) Clustering for Defining Level of Service (LOS) Criteria of Urban Streets

2018 ◽  
Vol 47 (4) ◽  
pp. 309-317
Author(s):  
Amit Kumar Das ◽  
Prasanta Kumar Bhuyan
Keyword(s):  
Travel Speed ◽  
Flow Speed ◽  
Free Flow ◽  
Level Of Service ◽  
Highway Capacity ◽  
Tree Algorithm ◽  
Highway Capacity Manual ◽  
Urban Streets ◽  
Flow Speeds ◽  
Self Organizing

This study is intended to define the Free Flow Speed (FFS) ranges of urban street classes and speed ranges of Level of Service (LOS) categories. In order to accomplish the study FFS data and average travel speed data were collected on five urban road corridors in the city of Mumbai, India. Mid-sized vehicle (car) mounted with Global Positioning System (GPS) device was used for the collection of large number of speed data. Self-Organizing Tree Algorithm (SOTA) clustering method and five cluster validation measures were used to classify the urban streets and LOS categories. The above study divulges that the speed ranges for different LOS categories are lower than that suggested by Highway Capacity Manual (HCM) 2000. Also it has been observed that average travel speed of LOS categories expressed in percentage of free flow speeds closely resembles the percentages mentioned in HCM 2010.

Sign in / Sign up

Export Citation Format

Share Document