The AAPF fault-tolerant method for small and complex product assembly

2021 ◽  
pp. 095440542110592
Author(s):  
Huanpei Lyu ◽  
Libin Zhang ◽  
Dapeng Tan ◽  
Fang Xu
Keyword(s):  
Fault Tolerance ◽  
Fault Tolerant ◽  
Circuit Breaker ◽  
Support Vector ◽  
Complex Product ◽  
Complex Products ◽  
Assembly Method ◽  
Assembly Tasks ◽  
Product Assembly ◽  
Method Model

Fault-tolerant control should be considered during assembly to ensure stability and efficiency of the assembly process. The paper proposes a fault-tolerant method to improve stability and efficiency during the assembly of small and complex products. The fault-tolerant method model was initially constructed, then an adaptive artificial potential field control algorithm (AAPF) was introduced to control related assembly tasks based on changes in assembly information. Next, active and passive fault tolerance methods were integrated using a least squares support vector machine (LS-SVM). Finally, the assembly of a 2P circuit breaker controller assembly with leakage protection was used as an example to verify the proposed assembly method. The experimental results demonstrated that the AAPF fault-tolerant method showed promising fault-tolerance capabilities for the assembly of small and complex products. Not only could it coordinate the number of tasks for each assembly robot, but it also effectively reduced the number of tasks that accumulated due to faults. The method proposed in this paper could effectively guarantee assembly stability and efficiency during small and complex product assembly.

Fault Tolerant Guidance of Under-Actuated Satellite Formation Flying Using Inter-Vehicle Coulomb Force

2019 ◽  
Vol 2 (1) ◽  
pp. 43-52
Author(s):  
Alireza Alikhani ◽  
Safa Dehghan M ◽  
Iman Shafieenejad
Keyword(s):  
Fault Tolerance ◽  
Formation Flying ◽  
Fault Tolerant ◽  
Coulomb Force ◽  
Control Law ◽  
Triangular Form ◽  
Satellite Formation Flying ◽  
Satellite Formation ◽  
Guidance Law ◽  
Tolerance Approach

In this study, satellite formation flying guidance in the presence of under actuation using inter-vehicle Coulomb force is investigated. The Coulomb forces are used to stabilize the formation flying mission. For this purpose, the charge of satellites is determined to create appropriate attraction and repulsion and also, to maintain the distance between satellites. Static Coulomb formation of satellites equations including three satellites in triangular form was developed. Furthermore, the charge value of the Coulomb propulsion system required for such formation was obtained. Considering Under actuation of one of the formation satellites, the fault-tolerance approach is proposed for achieving mission goals. Following this approach, in the first step fault-tolerant guidance law is designed. Accordingly, the obtained results show stationary formation. In the next step, tomaintain the formation shape and dimension, a fault-tolerant control law is designed.

Fault Tolerant Reliable Protocol (FTRP) Performance Evaluation in Wireless Sensor Networks: An Extensitive Study

2019 ◽  
pp. 1-36
Keyword(s):  
Wireless Sensor Networks ◽  
Fault Tolerance ◽  
Sensor Networks ◽  
Fault Tolerant ◽  
Cluster Head ◽  
Biological Data ◽  
Wireless Sensor ◽  
Delivery Ratio ◽  
Good Performer ◽  
Wide Range

Fault Tolerant Reliable Protocol (FTRP) is proposed as a novel routing protocol designed for Wireless Sensor Networks (WSNs). FTRP offers fault tolerance reliability for packet exchange and support for dynamic network changes. The key concept used is the use of node logical clustering. The protocol delegates the routing ownership to the cluster heads where fault tolerance functionality is implemented. FTRP utilizes cluster head nodes along with cluster head groups to store packets in transient. In addition, FTRP utilizes broadcast, which reduces the message overhead as compared to classical flooding mechanisms. FTRP manipulates Time to Live values for the various routing messages to control message broadcast. FTRP utilizes jitter in messages transmission to reduce the effect of synchronized node states, which in turn reduces collisions. FTRP performance has been extensively through simulations against Ad-hoc On-demand Distance Vector (AODV) and Optimized Link State (OLSR) routing protocols. Packet Delivery Ratio (PDR), Aggregate Throughput and End-to-End delay (E-2-E) had been used as performance metrics. In terms of PDR and aggregate throughput, it is found that FTRP is an excellent performer in all mobility scenarios whether the network is sparse or dense. In stationary scenarios, FTRP performed well in sparse network; however, in dense network FTRP’s performance had degraded yet in an acceptable range. This degradation is attributed to synchronized nodes states. Reliably delivering a message comes to a cost, as in terms of E-2-E. results show that FTRP is considered a good performer in all mobility scenarios where the network is sparse. In sparse stationary scenario, FTRP is considered good performer, however in dense stationary scenarios FTRP’s E-2-E is not acceptable. There are times when receiving a network message is more important than other costs such as energy or delay. That makes FTRP suitable for wide range of WSNs applications, such as military applications by monitoring soldiers’ biological data and supplies while in battlefield and battle damage assessment. FTRP can also be used in health applications in addition to wide range of geo-fencing, environmental monitoring, resource monitoring, production lines monitoring, agriculture and animals tracking. FTRP should be avoided in dense stationary deployments such as, but not limited to, scenarios where high application response is critical and life endangering such as biohazards detection or within intensive care units.

scholarly journals PROPOSING A SPECIFICATION STRUCTURE FOR COMPLEX PRODUCTS IN MODEL-BASED SYSTEMS ENGINEERING (MBSE)

2021 ◽  
Vol 1 ◽  
pp. 2481-2490
Author(s):  
Joshua Fahl ◽  
Tobias Hirschter ◽  
Gabriel Wöhrle ◽  
Albert Albers
Keyword(s):  
Systems Engineering ◽  
Student Development ◽  
Success Factors ◽  
Research Work ◽  
Development Project ◽  
Product Complexity ◽  
Complex Product ◽  
Complex Products ◽  
Model Based Systems Engineering ◽  
Product Specification

AbstractThis research work presents a methodological support for the specification of complex products. This is achieved by developing a specification structure in a MBSE environment. The new method draws on success factors of complex product specification, principles of MBSE and the explanatory model of PGE – Product Generation Engineering. For evaluation, the method is applied within a student development project. A high applicability and the realization of novel synergies for coping with continuously increasing product complexity is demonstrated.

scholarly journals Fault Analysis and Non-Redundant Fault Tolerance in 3-Level Double Conversion UPS Systems Using Finite-Control-Set Model Predictive Control

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2210
Author(s):  
Luís Caseiro ◽  
André Mendes
Keyword(s):  
Fault Tolerance ◽  
Model Predictive Control ◽  
Predictive Control ◽  
Fault Tolerant ◽  
Finite Control ◽  
Control Set ◽  
Corrective Actions ◽  
Uninterruptible Power ◽  
Hardware Reconfiguration ◽  
Redundant Fault

Fault-tolerance is critical in power electronics, especially in Uninterruptible Power Supplies, given their role in protecting critical loads. Hence, it is crucial to develop fault-tolerant techniques to improve the resilience of these systems. This paper proposes a non-redundant fault-tolerant double conversion uninterruptible power supply based on 3-level converters. The proposed solution can correct open-circuit faults in all semiconductors (IGBTs and diodes) of all converters of the system (including the DC-DC converter), ensuring full-rated post-fault operation. This technique leverages the versatility of Finite-Control-Set Model Predictive Control to implement highly specific fault correction. This type of control enables a conditional exclusion of the switching states affected by each fault, allowing the converter to avoid these states when the fault compromises their output but still use them in all other conditions. Three main types of corrective actions are used: predictive controller adaptations, hardware reconfiguration, and DC bus voltage adjustment. However, highly differentiated corrective actions are taken depending on the fault type and location, maximizing post-fault performance in each case. Faults can be corrected simultaneously in all converters, as well as some combinations of multiple faults in the same converter. Experimental results are presented demonstrating the performance of the proposed solution.

scholarly journals HS-stability and complex products in involution semigroups

2021 ◽  
Author(s):  
Bertalan Bodor ◽  
Erkko Lehtonen ◽  
Thomas Quinn-Gregson ◽  
Nikolaas Verhulst
Keyword(s):  
Complex Product ◽  
Complex Products ◽  
Special Cases

AbstractWhen does the complex product of a given number of subsets of a group generate the same subgroup as their union? We answer this question in a more general form by introducing HS-stability and characterising the HS-stable involution subsemigroup generated by a subset of a given involution semigroup. We study HS-stability for the special cases of regular $${}^{*}$$ ∗ -semigroups and commutative involution semigroups.

scholarly journals An FTC Design via Multiple SOGIs with Suppression of Harmonic Disturbances for Five-Phase PMSG-Based Tidal Current Applications

2021 ◽  
Vol 9 (6) ◽  
pp. 574
Author(s):  
Zhuo Liu ◽  
Tianhao Tang ◽  
Azeddine Houari ◽  
Mohamed Machmoum ◽  
Mohamed Fouad Benkhoris
Keyword(s):  
Fault Tolerance ◽  
Energy Conversion ◽  
Tidal Current ◽  
Fault Tolerant ◽  
Tidal Current Energy ◽  
Electromagnetic Forces ◽  
Model Free ◽  
Energy Conversion Systems ◽  
Power Scale ◽  
Current Energy

This paper firstly adopts a fault accommodation structure, a five-phase permanent magnet synchronous generator (PMSG) with trapezoidal back-electromagnetic forces, in order to enhance the fault tolerance of tidal current energy conversion systems. Meanwhile, a fault-tolerant control (FTC) method is proposed using multiple second-order generalized integrators (multiple SOGIs) to further improve the systematic fault tolerance. Then, additional harmonic disturbances from phase current or back-electromagnetic forces in original and Park’s frames are characterized under a single-phase open condition. Relying on a classical field-oriented vector control scheme, fault-tolerant composite controllers are then reconfigured using multiple SOGIs by compensating q-axis control commands. Finally, a real power-scale simulation setup with a gearless back-to-back tidal current energy conversion chain and a small power-scale laboratory prototype in machine side are established to comprehensively validate feasibility and fault tolerance of the proposed method. Simulation results show that the proposed method is able to suppress the main harmonic disturbances and maintain a satisfactory fault tolerance when third harmonic flux varies. Experimental results reveal that the proposed model-free fault-tolerant design is simple to implement, which contributes to better fault-tolerant behaviors, higher power quality and lower copper losses. The main advantage of the multiple SOGIs lies in convenient online implementation and efficient multi-harmonic extractions, without considering system’s model parameters. The proposed FTC design provides a model-free fault-tolerant solution to the energy harvested process of actual tidal current energy conversion systems under different working conditions.

A Design for Fault-Tolerant Communication Middleware Based on Time-Triggered

2014 ◽  
Vol 548-549 ◽  
pp. 1326-1329
Author(s):  
Juan Jin ◽  
Qing Fan Gu
Keyword(s):  
Fault Tolerance ◽  
Real Time ◽  
Fault Location ◽  
Fault Tolerant ◽  
Application Software ◽  
Tolerance Mechanisms ◽  
The Real ◽  
Communication Middleware ◽  
Fault Mechanism ◽  
Health Diagnosis

Against to the unsustainable problems of health diagnosis, fault location and fault tolerance mechanisms that existing in the current avionics applications, we proposed a fault-tolerant communication middleware which is based on time-triggered in this paper. This middleware is designed to provide a support platform for applications of the real-time based on communication middleware. From the communication middleware level and also combined with time-triggered mechanism and fault-tolerant strategy, it diagnoses the general faults first, and then routes them to the appropriate fault mechanism to process it. So the middleware completely separates fault-tolerant process from the application software functions.

Efficient Fault Tolerance on Cloud Environments

2018 ◽  
Vol 8 (3) ◽  
pp. 20-31 ◽  
Author(s):  
Sam Goundar ◽  
Akashdeep Bhardwaj
Keyword(s):  
Fault Tolerance ◽  
Web Applications ◽  
Fault Tolerant ◽  
Cloud Services ◽  
Level Of Service ◽  
Cloud Environments ◽  
Computing Environments ◽  
Service Assurance ◽  
Mission Critical ◽  
The Impact

With mission critical web applications and resources being hosted on cloud environments, and cloud services growing fast, the need for having greater level of service assurance regarding fault tolerance for availability and reliability has increased. The high priority now is ensuring a fault tolerant environment that can keep the systems up and running. To minimize the impact of downtime or accessibility failure due to systems, network devices or hardware, the expectations are that such failures need to be anticipated and handled proactively in fast, intelligent way. This article discusses the fault tolerance system for cloud computing environments, analyzes whether this is effective for Cloud environments.

scholarly journals Disruption attributes for low-volume, complex product assembly

Procedia CIRP ◽  
2021 ◽  
Vol 104 ◽  
pp. 1710-1715
Author(s):  
Stephan Breiter ◽  
Julia C. Arlinghaus
Keyword(s):  
Complex Product ◽  
Low Volume ◽  
Product Assembly
Sign in / Sign up

Export Citation Format

Share Document