Multi-objective optimization of squirrel cage fan for range hood based on Kriging model

2021 ◽  
pp. 095440622199586
Author(s):  
Qianhao Xiao ◽  
Jun Wang ◽  
Boyan Jiang ◽  
Weigang Yang ◽  
Xiaopei Yang
Keyword(s):  
Flow Rate ◽  
Optimization Design ◽  
Volume Flow Rate ◽  
Kriging Model ◽  
Volume Flow ◽  
Design Parameters ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Squirrel Cage

In view of the multi-objective optimization design of the squirrel cage fan for the range hood, a blade parameterization method based on the quadratic non-uniform B-spline (NUBS) determined by four control points was proposed to control the outlet angle, chord length and maximum camber of the blade. Morris-Mitchell criteria were used to obtain the optimal Latin hypercube sample based on the evolutionary operation, and different subsets of sample numbers were created to study the influence of sample numbers on the multi-objective optimization results. The Kriging model, which can accurately reflect the response relationship between design variables and optimization objectives, was established. The second-generation Non-dominated Sorting Genetic algorithm (NSGA-II) was used to optimize the volume flow rate at the best efficiency point (BEP) and the maximum volume flow rate point (MVP). The results show that the design parameters corresponding to the optimization results under different sample numbers are not the same, and the fluctuation range of the optimal design parameters is related to the influence of the design parameters on the optimization objectives. Compared with the prototype, the optimized impeller increases the radial velocity of the impeller outlet, reduces the flow loss in the volute, and increases the diffusion capacity, which improves the volume flow rate, and efficiency of the range hood system under multiple working conditions.

scholarly journals Squirrel-Cage Fan System Optimization and Flow Field Prediction Using Parallel Filling Criterion and Surrogate Model

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1620
Author(s):  
Qianhao Xiao ◽  
Xuna Shi ◽  
Linghui Wu ◽  
Jun Wang ◽  
Yanyan Ding ◽  
...  
Keyword(s):  
Flow Field ◽  
Flow Rate ◽  
Surrogate Model ◽  
Volume Flow Rate ◽  
System Optimization ◽  
Volume Flow ◽  
Design Parameters ◽  
Maximum Volume ◽  
Squirrel Cage ◽  
Optimal Sample

In this study, the blade shape of the squirrel-cage fan system inside the range hood was optimized using the surrogate model to improve the maximum volume flow rate. The influence of computational fluid dynamics (CFD) noise was concerned. The regression Kriging model (RKM) was used as a surrogate model to reflect the relationship between the design parameters of the blade and the volume flow rate. The parallel filling criterion after re-interpolation was used to improve the optimization efficiency further and ensure global optimization. Through experimental verification, we found that the relative error between the volume flow rate of the optimal sample of RKM and the experiment was only 0.4%. Compared with the prototype, the maximum volume flow rate of the optimal sample of RKM was increased by 2.9%, and the efficiency under the corresponding working conditions was increased by 2%. RKM was used to predict the velocity field of the volute and impeller exit section to explore the feasibility of the RKM in the flow field prediction. Research shows that the RKM cannot accurately predict the velocity of each grid on the cross-section. Still, it can accurately predict the changing trend of the velocity.

Multi-objective optimization of weld geometry in hybrid fiber laser-arc butt welding using Kriging model and NSGA-II

2016 ◽  
Vol 122 (6) ◽  
Author(s):  
Zhongmei Gao ◽  
Xinyu Shao ◽  
Ping Jiang ◽  
Chunming Wang ◽  
Qi Zhou ◽  
...  
Keyword(s):  
Fiber Laser ◽  
Kriging Model ◽  
Multi Objective Optimization ◽  
Hybrid Fiber ◽  
Nsga Ii ◽  
Butt Welding ◽  
Multi Objective ◽  
Weld Geometry

scholarly journals Multi-Objective Optimization Design of a Notch Filter Based on Improved NSGA-II for Conducted Emissions

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 83213-83223 ◽  
Author(s):  
Lu Zhang ◽  
Hongjuan Ge ◽  
Ying Ma ◽  
Jianliang Xue ◽  
Huang Li ◽  
...  
Keyword(s):  
Optimization Design ◽  
Notch Filter ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Conducted Emissions

PD/PID Controller Design for Seismic Control of High-Rise Buildings Using Multi-Objective Optimization: A Comparative Study with LQR Controller

2017 ◽  
Vol 11 (03) ◽  
pp. 1750009 ◽  
Author(s):  
Sadegh Etedali ◽  
Saeed Tavakoli
Keyword(s):  
Optimization Design ◽  
Tall Buildings ◽  
Pid Controllers ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Seismic Control ◽  
High Rise ◽  
Lqr Controller ◽  
Structural Responses

This paper developed multi-objective optimization design of proportional–derivative (PD) and proportional–integral–derivative (PID) controllers for seismic control of high-rise buildings. The case study is an 11-story realistic building equipped with active tuned mass damper (ATMD). Four earthquakes and nine performance indices are taken into account to assess the performance of the controllers. To create a good trade-off between the performance and robustness of the closed-loop structural system, a non-dominated sorting genetic algorithm, NSGA-II, is employed. To evaluate the degree of robustness of the controllers, four structural models with uncertainties in the nominal model of the structure is considered. For comparison purposes, a linear quadratic regulator (LQR) controller is also designed in the numerical simulations. Simulation results show that the proposed PD and PID controllers significantly perform better than the LQR in reduction of structural responses. Also, it is shown that the LQR does not provide a good performance in strong earthquakes. However, PD and PID controllers are able to significantly reduce structural responses. Moreover, it is shown that the PID has a better performance than the PD. The results also show that the proposed controllers are capable of maintaining a desired performance in the presence of modeling errors. They also have several advantages over modern controllers in terms of simplicity and reduction of required sensors and computational resources in tall buildings.

The Multi-Objective Optimization Design of a Forklift Steering Mechanism

2014 ◽  
Vol 1049-1050 ◽  
pp. 884-887
Author(s):  
Qin Man Fan ◽  
Yong Hai Wu
Keyword(s):  
Hydraulic System ◽  
Optimization Design ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Multi Objective ◽  
Oil Pump ◽  
System Pressure ◽  
Steering Mechanism ◽  
Steering Torque

The design and quality of steering mechanism is directly related to forklift traction, mobility, steering stability and safe operation. A multi-objective optimization model of the forklift steering mechanism is established in this paper. The objective function is minimum oil cylinder stroke difference and the minimum power oil pump. Steering torque, geometrical angles, geometry size and the hydraulic system pressure are used as constraint conditions. We use non dominated sorting genetic algorithm (NSGA II) based on the Pareto optimal concept to optimize and calculate model and get the optimal design of steering mechanism.

Multi-Objective Optimization Design of Tanker Ships via a Genetic Algorithm

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Marcelo Ramos Martins ◽  
Diego F. Sarzosa Burgos
Keyword(s):  
Genetic Algorithm ◽  
Optimization Design ◽  
Optimization Problem ◽  
Pareto Frontier ◽  
Ship Design ◽  
Design Parameters ◽  
Multi Objective Optimization ◽  
Total Cost ◽  
Multi Objective ◽  
The Cost

The cost of a new ship design heavily depends on the principal dimensions of the ship; however, dimensions minimization often conflicts with the minimum oil outflow (in the event of an accidental spill). This study demonstrates one rational methodology for selecting the optimal dimensions and coefficients of form of tankers via the use of a genetic algorithm. Therein, a multi-objective optimization problem was formulated by using two objective attributes in the evaluation of each design, specifically, total cost and mean oil outflow. In addition, a procedure that can be used to balance the designs in terms of weight and useful space is proposed. A genetic algorithm was implemented to search for optimal design parameters and to identify the nondominated Pareto frontier. At the end of this study, three real ships are used as case studies.

Multi-Objective Shape Optimization Design for Liquefied Natural Gas Cryogenic Helical Corrugated Steel Pipe

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
Zhixun Yang ◽  
Jun Yan ◽  
Jinlong Chen ◽  
Qingzhen Lu ◽  
Qianjin Yue
Keyword(s):  
Natural Gas ◽  
Optimization Design ◽  
Rbf Neural Network ◽  
Liquefied Natural Gas ◽  
Steel Pipe ◽  
Structural Deformation ◽  
Design Parameters ◽  
Nsga Ii ◽  
Multi Objective ◽  
Operation Conditions

Recently, the flexible cryogenic hose has been preferred as an alternative to exploit offshore liquefied natural gas (LNG), in which helical corrugated steel pipe is the crucial component with C-shaped corrugation. Parametric finite element models of the LNG cryogenic helical corrugated pipe are established using a three-dimensional shell element in this paper. Considering the nonlinearity of cryogenic material and large geometric structural deformation, mechanical behaviors are simulated under axial tension, bending, and internal pressure loads. In addition, design parameters are determined to optimize the shape of flexible cryogenic hose structures through sectional dimension analysis, and sensitivity analysis is performed with changing geometric parameters. A multi-objective optimization to minimize stiffness and stress is formulated under operation conditions. Full factorial experiment and radial basis function (RBF) neural network are applied to establish the approximated model for structure analysis. The set of Pareto optimal solutions and value range of parameters are obtained through nondominated sorting genetic algorithm II (NSGA-II) under manufacturing and stiffness constraints, thereby providing a feasible optimal approach for the structural design of LNG cryogenic corrugated hose.

Multi-Objective Shape Optimization Design for LNG Cryogenic Helical Corrugated Steel Pipe

2016 ◽  
Author(s):  
Zhixun Yang ◽  
Jun Yan ◽  
Qingzhen Lu ◽  
Jinlong Chen ◽  
Shanghua Wu ◽  
...  
Keyword(s):  
Shape Optimization ◽  
Optimization Design ◽  
Rbf Neural Network ◽  
Optimal Solution ◽  
Steel Pipe ◽  
Structural Deformation ◽  
Design Parameters ◽  
Operation Condition ◽  
Nsga Ii ◽  
Multi Objective

The flexible cryogenic hose has been a favored alternative for offshore liquefied natural gas (LNG) exploitation recently, of which helical corrugated steel pipe is the crucial component with C shaped corrugation. Parametric finite-element models of LNG cryogenic helical corrugated pipe are presented based on 3D shell element in this paper. Taking account of nonlinearity such as cryogenic material and large geometric structural deformation, mechanical behavior characteristics results are obtained under axial tensional, bending and inner pressure loads. Meanwhile, the design parameters are determined for the shape optimization of structures of the flexible cryogenic hose through sectional dimension analysis, and sensitivity analysis is performed with changing geometric parameters. A multi-objective optimization with the object of minimizing stiffness and strength stress is formulated based on operation condition. Full factorial experiment and radial basis function (RBF) neural network are applied to establish the approximated model for the analysis of the structure. The Pareto optimal solution set and value range of parameters are obtained through NSGA-II GA algorithm under manufacturing and stiffness constraints. It provides a feasible optimal approach for the structural design of LNG cryogenic corrugated hose.

Multi-objective optimization design for a hydrodynamic retarder based on CFD simulation considering cavitation effect

2021 ◽  
pp. 095440622110145
Author(s):  
Konghua Yang ◽  
Chunbao Liu ◽  
Qingtao Wu ◽  
Xuesong Li
Keyword(s):  
Flow Field ◽  
Optimization Design ◽  
Cfd Simulation ◽  
Internal Flow ◽  
Structure Design ◽  
Multi Objective Optimization ◽  
Hexahedral Mesh ◽  
Nsga Ii ◽  
Multi Objective ◽  
Cavitation Effect

It is important to suppress cavitation phenomenon for lower vibration and noise, which can be realized by structure optimization to reduce cavitation bubbles of flow field. Nonetheless, performance factors in hydrodynamic retarder are usually conflicted when conducting a structure design, it is hard to simultaneously restrain cavitation and improve the retarding performance. In our study, a combination of comprehensive CFD simulation and multi-objective optimization is developed to improve the retarding torque ([Formula: see text]), lessen the volume of Retarder ([Formula: see text]) and reduce the volume of bubbles ([Formula: see text]) in the internal flow field. First, the elaborate CFD simulation calculation, included a refined hexahedral mesh and the stress-blended eddy simulation (SBES), is proposed to investigate the unsteady flow field considering the cavitation, and its accuracy is validated by experimental data. Then, the RSM (Respond Surface Method) approximation model is constructed by combination of DOE (Design of Method) and CFD methods. The NSGA-II (Non-Dominated Sorting Genetic Algorithm) is selected as multi-objective optimization algorithm, and the weight and scale factor of each sub objective are specified. The optimization results, verified by theoretical calculation, show that [Formula: see text] is increased by 22%–24%, [Formula: see text] is reduced by 32%–45% and [Formula: see text] is reduced by 1%. Furthermore, the comparison of the vortex distributions before and after optimization demonstrates that the optimization improves the flow field impact and pressure loss in the retarder and reduces the number of bubbles resulting in the increasing vortex. Additionally, parameters’ effect on the cavitation and the braking performance are analyzed to efficiently achieve the best comprehensive performance of the retarder design. The newly-developed optimization method, which can understand the optimization principle and guide a balance between the cavitation and the retarding performance improvement, will reduce huge trial cost and time cost in the manufacture.

Sign in / Sign up

Export Citation Format

Share Document