A novel evaluation on rolling resistance characteristics of truck tire through the simplified experimental modal analysis

2020 ◽  
Vol 234 (12) ◽  
pp. 2771-2782
Author(s):  
Chengwei Zhu ◽  
Jingjing Yan ◽  
Ye Zhuang ◽  
Xueliang Gao ◽  
Qiang Chen ◽  
...  
Keyword(s):  
Polyvinylidene Fluoride ◽  
Evaluation Method ◽  
Single Point ◽  
Rolling Resistance ◽  
Damping Characteristics ◽  
Truck Tire ◽  
Truck Tires ◽  
Half Power ◽  
Resistance Coefficients ◽  
Correlative Relationship

A novel evaluation method for the rolling resistance characteristics of truck tire is proposed, in which a simplified modal experiment is suggested through a single-point vibration sampling from the tire surface with a polyvinylidene fluoride (PVDF) piezoelectric film. Three truck tires are utilized in the modal experiments, and the half-power bandwidth method is employed to identify the damping characteristics of the three tires. The damping characteristics of the tires are ranked by their values. These values are compared with their corresponding rolling resistance coefficients to manifest their correlative relationship. The experimental results, which are obtained from the modal experiment and the rolling resistance test, indicate that the modal parameters and the half-power bandwidth of the tire are exactly correlated to the rolling resistance coefficients. Furthermore, the damping ratios of the tires are correlated well with the rolling resistance coefficients among the tires. Overall, the proposed evaluation method could effectively evaluate the rolling resistance characteristics of the tire, which enable it to be a simple and economical alternative over the conventional tire rolling resistance experiments.

Natural Rubber Compounds for Truck Tires

1985 ◽  
Vol 58 (4) ◽  
pp. 740-750 ◽  
Author(s):  
D. Barnard ◽  
C. S. L. Baker ◽  
I. R. Wallace
Keyword(s):  
Stearic Acid ◽  
Heat Generation ◽  
Rolling Resistance ◽  
Synthetic Compound ◽  
Wear Performance ◽  
Test Pieces ◽  
Truck Tire ◽  
Truck Tires ◽  
Rubber Compounds ◽  
Lower Severity

Abstract An 80 NR/20 BR truck tread compound containing a semi-EV cure system and modified with a 6.0 phr level of stearic acid has been shown to exhibit excellent resistance to reversion when compared to a similar compound containing a normal 2.0 phr level of stearic acid. Improvements in the retention of laboratory abrasion resistance, heat generation, and most physical properties have been identified on test pieces subjected to typical truck retread overcure conditions. In highway fleet testing trials of 1100 × 22.5 truck retreads fitted to both third and fourth drive axles of tipper trucks, the modified compound displayed a 42% improvement in treadwear performance over the normal compound in the lower severity third axle positions while performance in the higher severity fourth axle positions was inferior by 20%. In comparison to a 55 SBR/45 BR truck tread, both NR compounds displayed superior wear performance on the fourth axles while some further adjustments of the modified compound are required to match the synthetic compound on the third axles. The reversal of wear performances for all compounds between third and fourth axles is due to the different abrasion mechanisms encountered. Laboratory abrasion rankings do not correlate with wear performances of compounds on the fourth drive axle of trucks, but they do correlate with wear performances on third drive axles. Despite the reversion characteristics of the normal semi-EV compound, no significant adverse effect on treadwear performance was evident at the start of tire life. The low heat generation of the modified compound in laboratory tests is confirmed in actual tire testing. Advantages in rolling resistance characteristics are also evident for the modified compound. Current studies at MRPRA suggest that further modifications of cure system design, in combination with the optimization of NR/BR ratios and mixing methods, will potentially provide NR dominant truck tread compounds which will exhibit superior wear performance in both the higher and lower abrasion severities encountered in heavy-duty truck tire service conditions.

Tire Rolling Resistance from Whole-Tire Hysteresis Ratio

1992 ◽  
Vol 65 (2) ◽  
pp. 444-452 ◽  
Author(s):  
P. S. Pillai ◽  
G. S. Fielding-Russell
Keyword(s):  
Rolling Resistance ◽  
Simple Equation ◽  
General Applicability ◽  
Full Size ◽  
Truck Tire ◽  
Truck Tires ◽  
Wide Range

Abstract A simple equation for tire rolling resistance in terms of whole-tire hysteresis ratio, tire load, and footprint dimensions has been developed from energetic considerations. The rolling resistances of a number of radial passenger and truck tires have been calculated using the equation, and the calculated values were successfully compared with the measured results. The general applicability of the equation was illustrated by predicting the rolling resistances of a wide range of tires—from an experimental HR78-8 minitire to a full size 11R24.5 truck tire.

Tire-Road Interactions — Harmony or Conflict?

1989 ◽  
Vol 17 (1) ◽  
pp. 66-84
Author(s):  
A. R. Williams
Keyword(s):  
Rolling Resistance ◽  
Major Effect ◽  
Road Surface ◽  
Interactive Effects ◽  
Central Theme ◽  
Water Drainage ◽  
The Road ◽  
Truck Tires ◽  
Road Surfaces ◽  
Tire Wear

Abstract This is a summary of work by the author and his colleagues, as well as by others reported in the literature, that demonstrate a need for considering a vehicle, its tires, and the road surface as a system. The central theme is interaction at the footprint, especially that of truck tires. Individual and interactive effects of road and tires are considered under the major topics of road aggregate (macroscopic and microscopic properties), development of a novel road surface, safety, noise, rolling resistance, riding comfort, water drainage by both road and tire, development of tire tread compounds and a proving ground, and influence of tire wear on wet traction. A general conclusion is that road surfaces have both the major effect and the greater potential for improvement.

Tread Depth Effects on Tire Rolling Resistance

2001 ◽  
Vol 29 (3) ◽  
pp. 134-154 ◽  
Author(s):  
J. R. Luchini ◽  
M. M. Motil ◽  
W. V. Mars
Keyword(s):  
Finite Element Analysis ◽  
Common Knowledge ◽  
Rolling Resistance ◽  
Test Method ◽  
Tire Model ◽  
Element Analysis ◽  
Truck Tires ◽  
The Finite Element Analysis ◽  
Equilibrium Test ◽  
Depth Effects

Abstract This paper discusses the measurement and modeling of tire rolling resistance for a group of radial medium truck tires. The tires were subjected to tread depth modifications by “buffing” the tread surface. The experimental work used the equilibrium test method of SAE J-1269. The finite element analysis (FEA) tire model for tire rolling resistance has been previously presented. The results of the testing showed changes in rolling resistance as a function of tread depth that were inconsistent between tires. Several observations were also inconsistent with published information and common knowledge. Several mechanisms were proposed to explain the results. Additional experiments and models were used to evaluate the mechanisms. Mechanisms that were examined included tire age, surface texture, and tire shape. An explanation based on buffed tread radius, and the resulting changes in footprint stresses, is proposed that explains the observed experimental changes in rolling resistance with tread depth.

Commercial Trailer Tires: Tire Inflation and Its Effect on Rolling Resistance, Fuel Economy, and Tire Footprint

2015 ◽  
Vol 43 (2) ◽  
pp. 144-162
Author(s):  
Al Cohn
Keyword(s):  
Fuel Economy ◽  
Rolling Resistance ◽  
Maintenance Cost ◽  
Wear Loss ◽  
Truck Tires ◽  
Footprint Analysis ◽  
Subsequent Loss ◽  
Resistance Data

ABSTRACT Maintaining proper tire inflation is the number one issue facing commercial fleets today. Common, slow-leaking tread area punctures along with leaking valve stems and osmosis through the tire casing lead to tire underinflation with a subsequent loss in fuel economy, reduction in retreadability, tread wear loss, irregular wear, and increase in tire-related roadside service calls. Commercial truck tires are the highest maintenance cost for fleets second only to fuel. This article will examine tire footprint analysis, rolling resistance data, and the effect on vehicle fuel economy from tires run at a variety of underinflated, overinflated, and recommended tire pressures. This analysis will also include the tire footprint impact by running tires on both fully loaded and unloaded trailers. The footprint analysis addresses both standard dual tires (295/75R22.5) along with the newer increasingly popular wide-base tire size 445/50R22.5.

Thermomechanical Coupling of a Hyper-viscoelastic Truck Tire and a Pavement Layer and its Impact on Three-dimensional Contact Stresses

2021 ◽  
pp. 036119812110171
Author(s):  
Angeli Jayme ◽  
Imad L. Al-Qadi
Keyword(s):  
Contact Stress ◽  
Contact Area ◽  
Three Dimensional ◽  
Interaction Model ◽  
Rolling Resistance ◽  
Contact Stresses ◽  
Thermomechanical Coupling ◽  
Temperature Profiles ◽  
Near Surface ◽  
Truck Tire

A thermomechanical coupling between a hyper-viscoelastic tire and a representative pavement layer was conducted to assess the effect of various temperature profiles on the mechanical behavior of a rolling truck tire. The two deformable bodies, namely the tire and pavement layer, were subjected to steady-state-uniform and non-uniform temperature profiles to identify the significance of considering temperature as a variable in contact-stress prediction. A myriad of ambient, internal air, and pavement-surface conditions were simulated, along with combinations of applied tire load, tire-inflation pressure, and traveling speed. Analogous to winter, the low temperature profiles induced a smaller tire-pavement contact area that resulted in stress localization. On the other hand, under high temperature conditions during the summer, higher tire deformation resulted in lower contact-stress magnitudes owing to an increase in the tire-pavement contact area. In both conditions, vertical and longitudinal contact stresses are impacted, while transverse contact stresses are relatively less affected. This behavior, however, may change under a non-free-rolling condition, such as braking, accelerating, and cornering. By incorporating temperature into the tire-pavement interaction model, changes in the magnitude and distribution of the three-dimensional contact stresses were manifested. This would have a direct implication on the rolling resistance and near-surface behavior of flexible pavements.

CARBON BLACK FOR RACING AND MOTORCYCLE TIRE TREADS. PERFORMANCE MODEL DEVELOPMENT

2011 ◽  
Vol 84 (4) ◽  
pp. 493-506
Author(s):  
Irene S. Yurovska ◽  
Michael D. Morris ◽  
Theo Al
Keyword(s):  
Carbon Black ◽  
Critical Role ◽  
Model Development ◽  
Aggregate Size ◽  
Rolling Resistance ◽  
Performance Model ◽  
Average Life ◽  
Carbon Blacks ◽  
Truck Tires ◽  
And Performance

Abstract Racing tires and motorcycle tires present individual segments of the tire market. For instance, while the average life of car and truck tires is 50 000 miles, the average life of race tires is 100 miles. Because tires play a critical role in a race, technical demands to assure safety and performance are growing. Similarly, tires have a large influence on safety, handling/grip, and performance of the rapidly growing world fleet of motorcycles, due to the fact of only two wheels being in contact with the ground. Thus, the common feature of both market segments is that the typical tire compromise of wear, rolling resistance, and traction is strongly weighted toward traction. Most of the recent efforts of rubber scientists have been directed toward lowering rolling resistance of the tread compounds, which left a certain void in the science of compounding for racing and motorcycle treads. Particularly, the industrial assortment of polymers and fillers used for motorcycle treads is commonly different from that used for car or truck treads, but it is not known how the filler properties affect the hysteresis–stiffness compromise. The objective of this study is to evaluate the effects of the carbon black characteristics on the important properties of a typical racing and motorcycle tire tread compound. More than 50 individual carbon blacks were mixed in a SBR formulation. The acquired data were statistically analyzed, and a linear multiple regression model was developed to relate rubber properties (responses), such as static modulus, complex dynamic modulus, hysteresis, and viscosity to the key carbon black characteristics (variables) of surface area, structure, aggregate size distribution, and surface activity. Prediction profiles created from the model demonstrate rubber performance limits for the range of carbon blacks tested, and indicate the niches to provide required combinations of the rubber properties.

FEA Tire Modeling and Validation Techniques

2015 ◽  
Author(s):  
Mehrsa Marjani ◽  
Moustafa El-Gindy ◽  
David Philipps ◽  
Fredrik Öijer ◽  
Inge Johansson
Keyword(s):  
Experimental Data ◽  
Dynamic Characteristics ◽  
Rolling Resistance ◽  
Vertical Acceleration ◽  
Virtual Model ◽  
Static And Dynamic Characteristics ◽  
Modeling Methods ◽  
Truck Tire ◽  
Tire Modeling ◽  
Tire Models

Recent advances in power and efficiency of computerized modeling methods has made it easier to develop accurate tire models. These newer models are now created with such accuracy that it has become easy to predict the experimental tire’s behavior and characteristics. These models are helpful with determining tire, tire-road, and tire-soil interaction properties. By creating virtual models, the overall capital for research and development can be reduced as well as replacing unavailable experimental tires for research. This research paper mainly focuses on the validation of computer generated FEA tire models which are then used for the prediction of the experimental tire’s rolling resistance, static and dynamic characteristics. Experimental data, such as rolling resistance and vertical acceleration are used in validation simulations in order to tune the virtual model to match the experimental tire’s behavior. The tire that was used for this research is a six-groove 445/50R22.5 FEA truck tire, which was constructed and validated over the course of this research.

Sign in / Sign up

Export Citation Format

Share Document