Designing and fabricating a novel medical insole with universal fluid layer with auto-customizability

2020 ◽  
Vol 234 (8) ◽  
pp. 864-873
Author(s):  
Ehsan Shakouri ◽  
Alireza Mossayebi ◽  
Babak Manafi
Keyword(s):  
Mechanical Properties ◽  
Strain Distribution ◽  
Fluid Layer ◽  
Dynamic State ◽  
Stress And Strain ◽  
Pressure Reduction ◽  
Element Analysis ◽  
Static State ◽  
The Finite Element Analysis ◽  
Mechanical Properties Testing

Medical insoles play a significant role in pressure reduction, proper stress–strain distribution, and correcting some deformities in the foot. The aim of the present research is to design and fabricate new medical insoles with universal fluid layer. After fabricating two types of insoles including flat silicone insole with shore 17 and flat silicone insole with universal fluid layer (medical silicone with shore 17 and silicone gel with shore 0), PEDAR test using one person in two standing and walking positions in three conditions comprised without the use of medical insole, using of flat medical silicone insole, and flat silicone insole with universal fluid layer was performed. These insoles were also modeled and solved in Abacus software according to the results obtained from mechanical properties testing of silicone and PEDAR test. The results of the finite element analysis showed that absorption of stress and strain in the static state by the silicone insoles with universal fluid layer was 63% and 63%, and in the dynamic state was 84% and 89% more than those obtained by the flat silicone insoles, respectively. The experimental results of the PEDAR system also showed that in the standing state, the silicone insoles with universal fluid layer and the flat silicone insoles had 58% and 30% pressure reduction, respectively, in comparison with without insole condition. Also, in the gait state, the silicone insoles with fluid layer and the flat silicone insole showed 37% and 9% pressure reduction, respectively, in comparison with without insole condition. Eventually, it was found out that the silicone insoles with fluid layer reduce plantar pressure well in comparison to the flat silicone insoles.

scholarly journals Finite element analysis relating shape, material properties, and dimensions of taenioglossan radular teeth with trophic specialisations in Paludomidae (Gastropoda)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wencke Krings ◽  
Jordi Marcé-Nogué ◽  
Stanislav N. Gorb
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Material Properties ◽  
Stress And Strain ◽  
Plant Surface ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Force Volume ◽  
General Size

AbstractThe radula, a chitinous membrane with embedded tooth rows, is the molluscan autapomorphy for feeding. The morphologies, arrangements and mechanical properties of teeth can vary between taxa, which is usually interpreted as adaptation to food. In previous studies, we proposed about trophic and other functional specialisations in taenioglossan radulae from species of African paludomid gastropods. These were based on the analysis of shape, material properties, force-resistance, and the mechanical behaviour of teeth, when interacting with an obstacle. The latter was previously simulated for one species (Spekia zonata) by the finite-element-analysis (FEA) and, for more species, observed in experiments. In the here presented work we test the previous hypotheses by applying the FEA on 3D modelled radulae, with incorporated material properties, from three additional paludomid species. These species forage either on algae attached to rocks (Lavigeria grandis), covering sand (Cleopatra johnstoni), or attached to plant surface and covering sand (Bridouxia grandidieriana). Since the analysed radulae vary greatly in their general size (e.g. width) and size of teeth between species, we additionally aimed at relating the simulated stress and strain distributions with the tooth sizes by altering the force/volume. For this purpose, we also included S. zonata again in the present study. Our FEA results show that smaller radulae are more affected by stress and strain than larger ones, when each tooth is loaded with the same force. However, the results are not fully in congruence with results from the previous breaking stress experiments, indicating that besides the parameter size, more mechanisms leading to reduced stress/strain must be present in radulae.

scholarly journals Finite Element Analysis Relating Shape, Material Properties, and Dimensions of Taenioglossan Radular Teeth with Trophic Specialisations in Paludomidae (Gastropoda)

2021 ◽  
Author(s):  
Wencke Krings ◽  
Jordi Marcé-Nogué ◽  
Stanislav N. Gorb
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Mechanical Behaviour ◽  
Material Properties ◽  
Stress And Strain ◽  
Plant Surface ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Force Volume

Abstract The radula, a chitinous membrane with embedded tooth rows, is the molluscan autapomorphy for feeding. The morphologies, arrangements and mechanical properties of teeth can vary between taxa, which is usually interpreted as adaptation to food. In previous studies, we proposed about trophic and other functional specialisations in taenioglossan radulae from species of African paludomid gastropods. These were based on the analysis of shape, material properties, force-resistance, and the mechanical behaviour of teeth, when interacting with an obstacle, which was previously simulated for one species (Spekia) by the finite-element-analysis (FEA) and, for more species, observed in experiments. In the here presented work, we test the previous hypotheses by applying the FEA on 3D modelled radulae, with incorporated material properties, from three additional paludomid species. These species forage either on algae attached to rocks (Lavigeria), covering sand (Cleopatra), or attached to plant surface and covering sand (Bridouxia). Since the analysed radulae vary greatly in their size between species, we additionally aimed at relating the simulated stress and strain distributions with the tooth sizes by altering the force/volume. For this purpose, we also included Spekia again in the present study. Our FEA results show that smaller radulae are more affected by stress and strain than larger ones, when each tooth is loaded with the same force. However, the results are not fully in congruence with results from the previous breaking stress experiments, indicating that besides the parameter size, more mechanisms leading to reduced stress/strain must be present in radulae.

Finite Element Analysis of Metal Flow of Finishing Groove in Hot Continuous Rolling Bar

2012 ◽  
Vol 510 ◽  
pp. 667-672
Author(s):  
Jia Lin Zhou ◽  
Chen Gang Pan ◽  
Xiao Yong Zhang
Keyword(s):  
Strain Distribution ◽  
Metal Flow ◽  
Dimensional Accuracy ◽  
Stress And Strain ◽  
Fe Model ◽  
Element Analysis ◽  
Iron And Steel ◽  
Expansion Angle ◽  
The Stability ◽  
Stress And Strain Distribution

This article established 3D FE model of dual-radius arc finishing groove and tangent expansion angle finishing groove using ANSYS / LS-DYNA software for Wuhan Iron and Steel plant Ф16 hot continuous bar, and analyzed metal flow pattern, stress and strain distribution of two types finishing grooves. The results show that surface stress and strain distribution of dual-radius arc finishing groove have better uniform than them of tangent expansion angle finishing groove, and dual-radius arc finishing groove ensures the stability of the rolled piece in finishing groove, improve the dimensional accuracy and surface quality of rolled finishing product.

Finite Element Analysis on Rack and Pinion of Roadheader

2013 ◽  
Vol 791-793 ◽  
pp. 718-721
Author(s):  
Man Man Xu ◽  
Yu Li ◽  
Sai Nan Xie ◽  
Qing Hua Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Spur Gear ◽  
Stress And Strain ◽  
Analysis Method ◽  
Element Analysis ◽  
The Road ◽  
The Finite Element Analysis ◽  
Gear Rack ◽  
Stress And Strain Distribution

To analyse the road-header rack and pinion by using the finite element analysis software COSMOS/WORKS. Compared to the traditional analytic calculation and numerical analysis method, it is more intuitively get 28 ° pressure angle spur gear rack meshing stress and strain distribution, which can rack and pinion improvements designed to provide scientific reference.

Design of the Lightweight Structure and its Mechanical Properties

2013 ◽  
Vol 461 ◽  
pp. 57-62
Author(s):  
Xiao Ting Jiang ◽  
Ce Guo ◽  
Xiu Yan Cao ◽  
Zhen Yu Lu
Keyword(s):  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Fiber Material ◽  
Element Analysis ◽  
Static Compression ◽  
Lightweight Structures ◽  
Carbon Fiber Material ◽  
The Finite Element Analysis ◽  
Lightweight Structure

Based on the microstructure of the cross-section of the beetle's elytra, a kind of bio-inspiredlightweight structure was designed and made by the carbon fiber material. The compressive andshear mechanical properties of the lightweight structures were studied with finite element method.In addition, quasi-static compression experiments of the structure samples were carried out. Theexperimental results and the finite element analysis results were compared and analyzed, whichproved the effectiveness of the finite element analysis.

Stress and Strain Distribution in the Upsetting Process

2021 ◽  
pp. 288-301
Author(s):  
Japheth Obiko ◽  
Fredrick Madaraka Mwema
Keyword(s):  
Finite Element ◽  
Strain Distribution ◽  
Metal Flow ◽  
Stress Strain ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Contact Surfaces ◽  
Stress Behaviour ◽  
Stress And Strain Distribution ◽  
Forging Load

Numerical simulation of metal flow behaviour was studied using DeformTM3D software. The simulation process was done on X20 steel taken from the software database at 1073-1273K temperature, 10mm/s die speed, and 67% height reduction. From the simulation results, forging load, damage, and stress/strain distributions were obtained. The results show that the forging load increased with a decrease in temperature or decreased with an increase in temperature. The maximum damage values increased as the temperature increased. The obtained maximum damage values were 0.42 (1073K), 0.43 (1173K), and 0.45 (1273K). The damage distribution was inhomogeneous in the deformed cylinder. The stress/strain distributions were inhomogeneous in the deformed cylinder. The location of the maximum strain was at the centre of the deformed cylinder while the maximum stress occurred at the die-cylinder contact surfaces. The study showed that flow stress behaviour can be predicted using finite element method. This shows the feasibility of applying the finite element analysis to analyse the forging process.

The Finite Element Analysis of Omni-Direction Side-Loading Forklift Truck Lifting System Based on COSMOSWorks

2012 ◽  
Vol 184-185 ◽  
pp. 534-537
Author(s):  
Jing Jing Zhou ◽  
Ai Dong Guo ◽  
Chun Hui Li ◽  
Zhen Jiang Lin ◽  
Tie Zhuang Wu
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Structural Optimization ◽  
Experimental Measurements ◽  
Element Analysis ◽  
Forklift Truck ◽  
The Finite Element Analysis ◽  
Lifting System

By setting contact sets, achieved overall analysis results of the mechanical properties with omni-direction side-loading forklift truck lifting system based on COSMOSWorks. And made an experimental measurements to omni-direction side-loading forklift truck lifting system by electrometric methods. There was a good relevance between experimental data and calculation values, and the deviation was basically within the 10 percent allowed. Finally, in this way it verified the correctness and reliability of the finite element analysis by experimental measurements. Ensured the omni-direction side-loading forklift truck lifting system could be safe and efficient to work. And also it laid a foundation for subsequent structural optimization.

Large Deformation Modeling Applied to the Sheet Metal Electromagnetic Forming

2008 ◽  
Author(s):  
C. Dumitras ◽  
I. Cozminca
Keyword(s):  
Finite Element ◽  
Deformation Process ◽  
Electromagnetic Forming ◽  
Stress And Strain ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Strain Fields ◽  
The Finite Element Analysis ◽  
History Of ◽  
Free Bulging

The electromagnetic forming has the advantage of a minimum forming time, but this is a major obstacle in determining the process’s history of the forming workpiece. Both experimental and theoretical known analysis methods for this process give a discret array of data (only for the displacements). One considers it is more adequate to use the finite element method in studying this process. The main advantage of the finite element analysis is given by the fact that it shows the stress and strain fields in a continuous way during the deformation process. Also, it offers a model from which one can predict the final shape of the part and the possible crack zones. One present a compared study of the experimental and the simulated results achieved of the free bulging aluminum specimens by electromagnetic impulses.

Material Characteristic for Capability Analysis of Solid Tire by Finite Element Method

2018 ◽  
Vol 777 ◽  
pp. 416-420
Author(s):  
Juthanee Phromjan ◽  
Chakrit Suvanjumrat
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Element Model ◽  
Average Error ◽  
Element Analysis ◽  
Compression Load ◽  
Stress Strain Relation ◽  
The Finite Element Analysis ◽  
Capability Analysis ◽  
The Finite Element Model

The natural rubber compound of each layer of solid tire had determined the mechanical properties in tension. It was found that the stress-strain relation of each material tire layer was fitted very well with the Ogden constitutive model. The R2 which was 0.986, 0.996 and 0.985 represented the certain curve fitting on the internal, middle and tread layer of solid tire, respectively. Subsequently, the Ogden model was implemented in the finite element model of the rubber specimen and solid tire. The finite element analysis results obtained an average error of 18.00% and 14.63% for the specimen and solid tire model by comparing to the physical experiment, respectively. Particularly, the mechanical properties of the natural compounds could be used to predict the ultimate compression load for the solid tire failure.

Sign in / Sign up

Export Citation Format

Share Document