Computational Analysis of Olfactory Airspace in Patients With Unilateral Cleft Lip Nasal Deformity

2020 ◽  
pp. 105566562098275
Author(s):  
Reanna Shah ◽  
Jeffrey R. Marcus ◽  
Dennis O. Frank-Ito
Keyword(s):  
Cleft Lip ◽  
Computational Analysis ◽  
Normal Subjects ◽  
Nasal Deformity ◽  
Normal Anatomy ◽  
3 Dimensional ◽  
Computed Tomography Images ◽  
High Prevalence ◽  
Dimensional Reconstruction ◽  
The Impact

Objectives: To evaluate the magnitude of olfactory recess opacity in patients with unilateral cleft lip nasal deformity (uCLND). Design: Subject-specific 3-dimensional reconstruction of the nasal airway anatomy was created from computed tomography images in 11 (4 males and 7 females) subjects with uCLND and 7 (3 males, and 4 females) normal subjects. The volume and surface area of each subject’s unilateral and bilateral olfactory airspace was quantified to assess the impact of opacification. Qualitatively speaking, patients with 75% to 100% olfactory recess opacification were classified as extreme, 50% to 75% as severe, 25% to 50% as moderate, and 0% to 25% as mild. Results: Of the 11 subjects with uCLND, 5 (45%) were classified as having extreme olfactory recess opacification, 3 (27%) subjects had severe opacification, and 3 (27%) subjects had moderate opacification. Mean (±SD) bilateral olfactory recess volume was significantly greater in normal subjects than in subjects with uCLND (0.9668 cm3 ± 0.4061 cm3 vs 0.3426 cm3 ± 0.1316 cm3; P < .001). Furthermore, unilateral olfactory airspace volumes for the cleft and non-cleft sides in subjects with uCLND were considerably less than unilateral olfactory volume in subjects with normal anatomy (uCLND cleft side = 0.1623 cm3 ± 0.0933 cm3; uCLND non-cleft side = 0.1803 cm3 ± 0.0938 cm3; normal = 0.4834 cm3 ± 0.2328 cm3; P < .001). Conclusions: Our findings indicate a high prevalence of olfactory recess opacification among subjects with uCLND when compared to subjects with normal anatomy. The majority of subjects with uCLND had extreme olfactory recess opacity, which will likely influence their sense of smell.

scholarly journals Computational Analysis of the Mature Unilateral Cleft Lip Nasal Deformity on Nasal Patency

2019 ◽  
Vol 7 (5) ◽  
pp. e2244 ◽  
Author(s):  
Dennis O. Frank-Ito ◽  
David J. Carpenter ◽  
Tracy Cheng ◽  
Yash J. Avashia ◽  
David A. Brown ◽  
...  
Keyword(s):  
Cleft Lip ◽  
Computational Analysis ◽  
Nasal Patency ◽  
Nasal Deformity

Three-Dimensional Reconstruction Using Stereo Pairs from Serial Thick Sections

1977 ◽  
Vol 35 ◽  
pp. 562-563
Author(s):  
Robert Glaeser ◽  
Thomas Bauer ◽  
David Grano
Keyword(s):  
Three Dimensional ◽  
Dimensional Structure ◽  
Serial Sections ◽  
Thin Sections ◽  
3 Dimensional ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Dimensional Reconstruction ◽  
Stereo Imagery ◽  
Whole Mounts

In transmission electron microscopy, the 3-dimensional structure of an object is usually obtained in one of two ways. For objects which can be included in one specimen, as for example with elements included in freeze- dried whole mounts and examined with a high voltage microscope, stereo pairs can be obtained which exhibit the 3-D structure of the element. For objects which can not be included in one specimen, the 3-D shape is obtained by reconstruction from serial sections. However, without stereo imagery, only detail which remains constant within the thickness of the section can be used in the reconstruction; consequently, the choice is between a low resolution reconstruction using a few thick sections and a better resolution reconstruction using many thin sections, generally a tedious chore. This paper describes an approach to 3-D reconstruction which uses stereo images of serial thick sections to reconstruct an object including detail which changes within the depth of an individual thick section.

Structural preservation and absolute contrast of catalase crystal sections prepared with tannic acid

1983 ◽  
Vol 41 ◽  
pp. 448-449
Author(s):  
C.W. Akey ◽  
M. Szalay ◽  
S.J. Edelstein
Keyword(s):  
Tannic Acid ◽  
Beef Heart ◽  
X Rays ◽  
Screw Axis ◽  
General Applicability ◽  
Thin Sections ◽  
Beef Liver ◽  
3 Dimensional ◽  
Dimensional Reconstruction ◽  
Structural Preservation

Three methods of obtaining 20 Å resolution in sectioned protein crystals have recently been described. They include tannic acid fixation, low temperature embedding and grid sectioning. To be useful for 3-dimensional reconstruction thin sections must possess suitable resolution, structural fidelity and a known contrast. Tannic acid fixation appears to satisfy the above criteria based on studies of crystals of Pseudomonas cytochrome oxidase, orthorhombic beef liver catalase and beef heart F1-ATPase. In order to develop methods with general applicability, we have concentrated our efforts on a trigonal modification of catalase which routinely demonstrated a resolution of 40 Å. The catalase system is particularly useful since a comparison with the structure recently solved with x-rays will permit evaluation of the accuracy of 3-D reconstructions of sectioned crystals.Initially, we re-evaluated the packing of trigonal catalase crystals studied by Longley. Images of the (001) plane are of particular interest since they give a projection down the 31-screw axis in space group P3121. Images obtained by the method of Longley or by tannic acid fixation are negatively contrasted since control experiments with orthorhombic catalase plates yield negatively stained specimens with conditions used for the larger trigonal crystals.

Spot-scan imaging of ice-embedded catalase crystal on a slow-scan CCD camera in a 400-kV electron cryomicroscope

1994 ◽  
Vol 52 ◽  
pp. 98-99
Author(s):  
Wah Chiu ◽  
Michael Sherman ◽  
Jaap Brink
Keyword(s):  
Electron Diffraction ◽  
Ccd Camera ◽  
Protein Crystal ◽  
Modulation Transfer ◽  
Measured Intensity ◽  
3 Dimensional ◽  
Dimensional Reconstruction ◽  
Diffraction Patterns ◽  
Complex Crystal

In protein electron crystallography, both low dose electron diffraction patterns and images are needed to provide accurate amplitudes and phases respectively for a 3-dimensional reconstruction. We have demonstrated that the Gatan 1024x1024 model 679 slow-scan CCD camera is useful to record electron diffraction intensities of glucose-embedded crotoxin complex crystal to 3 Å resolution. The quality of the electron diffraction intensities is high on the basis of the measured intensity equivalence ofthe Friedel-related reflections. Moreover, the number of patterns recorded from a single crystal can be as high as 120 under the constraints of radiation damage and electron statistics for the reflections in each pattern.A limitation of the slow-scan CCD camera for recording electron images of protein crystal arises from the relatively large pixel size, i.e. 24 μm (provided by Gatan). The modulation transfer function of our camera with a P43 scintillator has been determined for 400 keV electrons and shows an amplitude fall-off to 0.25 at 1/60 μm−1.

Immunolocalization of nuclear antigens in cryofixed cells which have been prepared by molecular distillation drying or freeze-substitution

1990 ◽  
Vol 48 (3) ◽  
pp. 898-899
Author(s):  
David L. Spector ◽  
Robert J. Derby
Keyword(s):  
Cell Nucleus ◽  
Molecular Distillation ◽  
Functional Organization ◽  
Freeze Substitution ◽  
3 Dimensional ◽  
Small Nuclear Ribonucleoprotein ◽  
Nuclear Antigens ◽  
Dimensional Reconstruction ◽  
Nuclear Regions ◽  
Immunoperoxidase Labeling

Studies in our laboratory are involved in evaluating the structural and functional organization of the mammalian cell nucleus. Since several major classes (U1, U2, U4/U6, U5) of small nuclear ribonucleoprotein particles (snRNPs) play a crucial role in the processing of pre-mRNA molecules, we have been interested in the localization of these particles within the cell nucleus. Using pre-embedding immunoperoxidase labeling combined with 3-dimensional reconstruction, we have recently shown that nuclear regions enriched in snRNPs form a reticular network within the nucleoplasm which extends between the nucleolar surface and the nuclear envelope. In the present study we were inte rested in extending these nuclear localizations using cell preparation techniques which avoid slow penetration of fixatives, chemical crosslinking of potential antigens and solvent extraction. CHOC 400 cells were cryofixed using a CF 100 ultra rapid cooling device (LifeCell Corp.). After cryofixation cells were molecular distillation dried, vapor osmicated, in filtra ted in 100% Spurr resin in vacuo and polymerized in molds a t 60°C. Using this procedure we were able to evaluate the distribution of snRNPs in resin embedded cells which had not been chemically fixed, incubated in cryoprotectants or extracted with solvents.

Comparing the Impact of Religious Discourse on HIV/AIDS in Islam and Christianity in Africa

2012 ◽  
Vol 8 ◽  
Author(s):  
Sloane Speakman
Keyword(s):  
Social Factors ◽  
Negative Relationship ◽  
Hiv Prevalence ◽  
Religious Discourse ◽  
Prevalence Rates ◽  
The Social ◽  
High Prevalence ◽  
Islam And Christianity ◽  
Sub Saharan ◽  
The Impact

In examining the strikingly high prevalence rates of HIV in many parts of Africa, reaching as high as 5% in some areas, how does the discourse promoted by the predominant religions across the continent, Islam and Christianity, affect the outlook of their followers on the epidemic? This question becomes even more intriguing after discovering the dramatic difference in rate of HIV prevalence between Muslims and Christians in Africa, confirmed by studies that have found a negative relationship to exist between HIV prevalence and being Muslim in Africa, even in Sub-Saharan African nations. Why does this gap in prevalence rates exist? Does Islam advocate participating in less risky behavior more so than Christianity? By comparing the social construction, epidemiological understanding and public responses among Muslim populations in Africa with Christian ones, it becomes apparent that many similarities exist between the two regarding discourse and that, rather than religious discourse itself, other social factors, such as circumcision practices, contribute more to the disparity in HIV prevalence than originally thought.

scholarly journals The nasal cantilever technique in children undergoing primary cleft lip surgery: novel concepts and review

2020 ◽  
Vol 5 (1-2) ◽  
pp. 53-62
Author(s):  
Badr M. I. Abdulrauf
Keyword(s):  
Learning Curve ◽  
Cleft Lip ◽  
Nasal Bone ◽  
Case Series ◽  
Nasal Deformity ◽  
Challenging Issue ◽  
Primary Surgery ◽  
Novel Concept ◽  
Cleft Nasal Deformity

AbstractBackgroundNasal deformity associated with cleft lip deformity is a challenging issue, encompassing controversies, theories, and a diversity of techniques. Historically, esthetic outcomes have ranged from being below expectations to barely acceptable.MethodBased on the concept that the nasal cartilaginous framework in clefts is similar to that of a collapsing pyramid, a novel suspension technique has been described. The entire cartilaginous structure is lifted from the infratip segment with a loop suture and is secured in a cantilever fashion onto the periosteum overlying the nasal bone. This part of the operation is performed in a semiclosed manner. The technique is applied during primary surgery in bilateral and unilateral nasal cleft lip deformities, with changes in the orientation of the cantilever loop suture. Studies conducted by Masters S. Tajima, H. McComb, H. Thomson, D. Fisher, and J. Mulliken, which are most relevant to this article, have been reviewed and discussed throughout.ResultsThe technique was first applied over 10 years ago. A case series of nine children whose parents consented to the developing technique is presented with follow-up ranging from months to years, along with technical descriptions and illustrative drawings. None of these cases had preoperative orthopedic correction, molding, or postoperative nostril splints. The esthetic outcome was optimal enough; none of the cases requested a secondary correction.ConclusionThe nasal cantilever technique is a novel concept in cleft nasal deformity, which can be used in conjunction with an appropriate lip technique, per the surgeon’s discretion. Other than a learning curve, we believe that it provides a solid correction by securing the cartilaginous structures after they have been mobilized to a stable base, the nasion.

Double, triple or quadruple hits? Exploring the impact of cybercrime on victims in the Netherlands

2021 ◽  
pp. 026975802110106
Author(s):  
Raoul Notté ◽  
E.R. Leukfeldt ◽  
Marijke Malsch
Keyword(s):  
Public Opinion ◽  
Literature Review ◽  
The Netherlands ◽  
Public Discourse ◽  
Moral Judgments ◽  
Victim Blaming ◽  
High Prevalence ◽  
Different Types ◽  
The Impact ◽  
Insight Into

This article explores the impact of online crime victimisation. A literature review and 41 interviews – 19 with victims and 22 with experts – were carried out to gain insight into this. The interviews show that most impacts of online offences correspond to the impacts of traditional offline offences. There are also differences with offline crime victimisation. Several forms of impact seem to be specific to victims of online crime: the substantial scale and visibility of victimhood, victimisation that does not stop in time, the interwovenness of online and offline, and victim blaming. Victims suffer from double, triple or even quadruple hits; it is the accumulation of different types of impact, enforced by the limitlessness in time and space, which makes online crime victimisation so extremely invasive. Furthermore, the characteristics of online crime victimisation greatly complicate the fight against and prevention of online crime. Finally, the high prevalence of cybercrime victimisation combined with the severe impact of these crimes seems contradictory with public opinion – and associated moral judgments – on victims. Further research into the dominant public discourse on victimisation and how this affects the functioning of the police and victim support would be valuable.

Three-Dimensional Printing in Cleft Care: A Systematic Review

2021 ◽  
pp. 105566562110131
Author(s):  
Farrukh R. Virani ◽  
Evan C. Chua ◽  
Mary Roz Timbang ◽  
Tsung-yen Hsieh ◽  
Craig W. Senders
Keyword(s):  
Systematic Review ◽  
3D Printing ◽  
Clinical Outcomes ◽  
Outcome Measures ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Secondary Outcome ◽  
Exclusion Criteria ◽  
3 Dimensional ◽  
Dimensional Printing

Objective: To determine the current applications of 3-dimensional (3D) printing in the care of patients with cleft lip and palate. We also reviewed 3D printing limitations, financial analysis, and future implications. Design: Retrospective systematic review. Methods: Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines were used by 3 independent reviewers. Articles were identified from Cochrane library, Ovid Medline, and Embase. Search terms included 3D printing, 3 dimensional printing, additive manufacturing, rapid prototyping, cleft lip, and cleft palate. Exclusion criteria included articles not in English, animal studies, reviews without original data, oral presentations, abstracts, opinion pieces, and articles without relevance to 3D printing or cleft lip and palate. Main Outcome Measures: Primary outcome measure was the purpose of 3D printing in the care of patients with cleft lip and palate. Secondary outcome measures were cost analysis and clinical outcomes. Results: Eight-four articles were identified, and 39 met inclusion/exclusion criteria. Eleven studies used 3D printing models for nasoalveolar molding. Patient-specific implants were developed via 3D printing in 6 articles. Surgical planning was conducted via 3D printing in 8 studies. Eight articles utilized 3D printing for anatomic models/educational purposes. 3-Dimensional printed models were used for surgical simulation/training in 6 articles. Bioprinting was utilized in 4 studies. Secondary outcome of cost was addressed in 8 articles. Conclusion: 3-Dimensional printing for the care of patients with cleft lip and palate has several applications. Potential advantages of utilizing this technology are demonstrated; however, literature is largely descriptive in nature with few clinical outcome measures. Future direction should be aimed at standardized reporting to include clinical outcomes, cost, material, printing method, and results.

Sign in / Sign up

Export Citation Format

Share Document