The reactivity of bentonites: a review. An application to clay barrier stability for nuclear waste storage

Clay Minerals ◽  
1998 ◽  
Vol 33 (2) ◽  
pp. 187-196 ◽  
Author(s):  
A. Meunier ◽  
B. Velde ◽  
L. Griffault
Keyword(s):  
Thermal Stability ◽  
Nuclear Waste ◽  
Mineral Assemblage ◽  
Hydrothermal Systems ◽  
Initial Reaction ◽  
Nuclear Waste Storage ◽  
Waste Storage ◽  
Kinetics Of ◽  
Clay Barrier ◽  
Thermal Stability Of

AbstractThe thermal stability of bentonites is of particular interest for containment barriers in nuclear waste storage facilities. The kinetics of smectite reactions have been investigated under laboratory conditions for some time. The variables of time, chemical composition and temperature have been varied in these experiments. The results of such an assessment are that there are about as many kinetic values deduced from experiments as there are experiments.Experiments using natural bentonite to study the smectite-to-illite conversion have been interpreted as a progressive transformation of montmorillonite to illite. It is highly probable that the initial reaction product is not illite but a high-charge beidellite + saponite + quartz mineral assemblage which gives, then, beidellite-mica interstratified mixed-layer minerals. These experimental reactions are noticeably different from those of diagenesis, being closer to reactions in hydrothermal systems.

Chloritization in Proterozoic granite from the Äspö Laboratory, southeastern Sweden: record of hydrothermal alterations and implications for nuclear waste storage

Clay Minerals ◽  
2011 ◽  
Vol 46 (3) ◽  
pp. 495-513 ◽  
Author(s):  
S. Morad ◽  
M. Sirat ◽  
M. A. K. El-Ghali ◽  
H. Mansurbeg
Keyword(s):  
Nuclear Waste ◽  
Reaction Mechanisms ◽  
Mineral Assemblage ◽  
Granitic Rocks ◽  
Chemical Characteristics ◽  
Fluid Composition ◽  
Fracture Permeability ◽  
Nuclear Waste Storage ◽  
Waste Storage ◽  
Basement Rocks

AbstractHydrothermal alteration of Proterozoic granitic rocks in the Äspö underground laboratory, southestern Sweden, resulted in the formation of chlorite with large variations in textural and chemical characteristics, which reflect differences in formation temperatures, fluid composition, and reaction mechanisms. The mineral assemblage associated with chlorite, including Ca-Al silicates (prehnite, pumpellyite, epidote, and titanite), Fe-oxides, calcite, albite and K-feldspar, suggests that chloritization occurred at temperatures of between 200–350°C during various hydrothermal events primarily linked to magmatism and rock deformation. Petrographic and electron microprobe analyses revealed that chlorite replaced biotite, amphibole and magnetite, and hydrothermal chlorite phases filled fractures and vugs in the granitic rocks. While fracture-filling chlorite reduces fracture permeability, chloritization reactions in the host granite resulted in the formation of new localized microporosity that should thus be taken into consideration when evaluating the safety of the granitic basement rocks as a repository for nuclear waste. It is also important to take into account that similar alteration reactions may occur at the site of stored nuclear waste where temperatures in excess of 100°C might be encountered.

The Ordered Phase Formation in Ti-Al-Ga Alloys

1970 ◽  
Vol 28 ◽  
pp. 440-441
Author(s):  
Shiro Fujishiro ◽  
Harold L. Gegel
Keyword(s):  
Thermal Stability ◽  
High Temperature ◽  
Titanium Alloys ◽  
Growth Kinetics ◽  
Stoichiometric Composition ◽  
Good Potential ◽  
Alpha Titanium ◽  
Cold Rolled ◽  
Kinetics Of ◽  
Thermal Stability Of

Ordered-alpha titanium alloys having a DO19 type structure have good potential for high temperature (600°C) applications, due to the thermal stability of the ordered phase and the inherent resistance to recrystallization of these alloys. Five different Ti-Al-Ga alloys consisting of equal atomic percents of aluminum and gallium solute additions up to the stoichiometric composition, Ti3(Al, Ga), were used to study the growth kinetics of the ordered phase and the nature of its interface.The alloys were homogenized in the beta region in a vacuum of about 5×10-7 torr, furnace cooled; reheated in air to 50°C below the alpha transus for hot working. The alloys were subsequently acid cleaned, annealed in vacuo, and cold rolled to about. 050 inch prior to additional homogenization

scholarly journals (Hydroxy)apatite on cement: insights into a new surface treatment

2021 ◽  
Author(s):  
Ronald Joseph Turner ◽  
Pieter Bots ◽  
Alan Richardson ◽  
Paul Bingham ◽  
Alex Scrimshire ◽  
...  
Keyword(s):  
Low Temperature ◽  
Surface Treatment ◽  
Nuclear Waste ◽  
Environmental Remediation ◽  
Coating Material ◽  
Hydroxy Apatite ◽  
Nuclear Waste Storage ◽  
Waste Storage ◽  
Architectural Preservation

(Hydroxy)apatite [Ca10(PO4)6(OH)2], has emerging potential as a cement coating material, with applications in environmental remediation, nuclear waste storage and architectural preservation. In these low temperature environments and when precipitating from...

scholarly journals Management of the Energy and Economic Potential of Nuclear Waste Use

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3709
Author(s):  
Bader Alshuraiaan ◽  
Sergey Pushkin ◽  
Anastasia Kurilova ◽  
Magdalena Mazur
Keyword(s):  
Nuclear Fuel ◽  
Nuclear Waste ◽  
Spent Nuclear Fuel ◽  
Integrated Approach ◽  
Economic Potential ◽  
Nuclear Waste Storage ◽  
Scientific Discussion ◽  
Management Algorithm ◽  
Waste Storage ◽  
The Eu

Recently, issues related to the effects (benefit or harm) of processing nuclear waste and its further use as fuel have been increasingly often raised in the scientific discussion. In this regard, the research aims to investigate issues related to the assessment of the economic potential of nuclear waste use, as well as the cooperation between states in the context of the reduction of risks associated with nuclear waste storage and processing. The research methodology is based on an integrated approach, including statistical, factor analysis, and the proposed system of performance indicators for managing spent nuclear fuel use. The research was carried out on the basis of materials from Russia and the EU countries. In the course of the study, a model of cooperation between states has been developed (based on the example of technologies and methods of processing nuclear waste used in the EU and Russia) according to the nuclear waste (spent nuclear fuel) management algorithm. The model considers the risks and threats associated with ecology and safety. The developments and other results described in the study should be used in further research devoted to the use of nuclear waste as heat-producing elements.

scholarly journals Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2872
Author(s):  
Seyed Mohamad Reza Paran ◽  
Ghasem Naderi ◽  
Elnaz Movahedifar ◽  
Maryam Jouyandeh ◽  
Krzysztof Formela ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Halloysite Nanotubes ◽  
Butadiene Rubber ◽  
Order Model ◽  
Scanning Calorimetry ◽  
Theoretical Methods ◽  
Vulcanization Kinetics ◽  
Kinetics Of ◽  
Thermal Stability Of

The effect of several concentrations of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the vulcanization and degradation kinetics of XNBR/epoxy compounds were evaluated using experimental and theoretical methods. The isothermal vulcanization kinetics were studied at various temperatures by rheometry and differential scanning calorimetry (DSC). The results obtained indicated that the nth order model could not accurately predict the curing performance. However, the autocatalytic approach can be used to estimate the vulcanization reaction mechanism of XNBR/epoxy/XHNTs nanocomposites. The kinetic parameters related to the degradation of XNBR/epoxy/XHNTs nanocomposites were also assessed using thermogravimetric analysis (TGA). TGA measurements suggested that the grafted nanotubes strongly enhanced the thermal stability of the nanocomposite.

Thermal Breakdown Kinetics of 1-Ethyl-3-Methylimidazolium Ethylsulfate Measured Using Quantitative Infrared Spectroscopy

2017 ◽  
Vol 71 (12) ◽  
pp. 2626-2631 ◽  
Author(s):  
Jeffrey L. Wheeler ◽  
McKinley Pugh ◽  
S. Jake Atkins ◽  
Jason M. Porter
Keyword(s):  
Thermal Stability ◽  
Room Temperature ◽  
Computational Models ◽  
Elevated Temperatures ◽  
Molar Absorptivity ◽  
Ir Absorption ◽  
Optical Cell ◽  
Multiple Samples ◽  
Kinetics Of ◽  
Thermal Stability Of

In this work, the thermal stability of the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM][EtSO4]) is investigated using infrared (IR) spectroscopy. Quantitative IR absorption spectral data are measured for heated [EMIM][EtSO4]. Spectra have been collected between 25 ℃ and 100 ℃ using a heated optical cell. Multiple samples and cell pathlengths are used to determine quantitative values for the molar absorptivity of [EMIM][EtSO4]. These results are compared to previous computational models of the ion pair. These quantitative spectra are used to measure the rate of thermal decomposition of [EMIM][EtSO4] at elevated temperatures. The spectroscopic measurements of the rate of decomposition show that thermogravimetric methods overestimate the thermal stability of [EMIM][EtSO4].

Sign in / Sign up

Export Citation Format

Share Document