scholarly journals An electrodynamics model for Data Interpretation and Numerical Analysis of ionospheric Missions and Observations (DINAMO)

2022 ◽  
Vol 9 (1) ◽  
Author(s):  
Samuel A. Shidler ◽  
Fabiano S. Rodrigues
Keyword(s):  
Numerical Analysis ◽  
Electric Fields ◽  
Data Interpretation ◽  
Vertical Shear ◽  
Plasma Drifts ◽  
Realistic Representation ◽  
Bottom Side ◽  
Dynamo Equation ◽  
Space Sciences ◽  
The Impact

AbstractWe introduce a new numerical model developed to assist with Data Interpretation and Numerical Analysis of ionospheric Missions and Observations (DINAMO). DINAMO derives the ionospheric electrostatic potential at low- and mid-latitudes from a two-dimensional dynamo equation and user-specified inputs for the state of the ionosphere and thermosphere (I–T) system. The potential is used to specify the electric fields and associated F-region E × B plasma drifts. Most of the model was written in Python to facilitate the setup of numerical experiments and to engage students in numerical modeling applied to space sciences. Here, we illustrate applications and results of DINAMO in two different analyses. First, DINAMO is used to assess the ability of widely used I–T climatological models (IRI-2016, NRLMSISE-00, and HWM14), when used as drivers, to produce a realistic representation of the low-latitude electrodynamics. In order to evaluate the results, model E × B drifts are compared with observed climatology of the drifts derived from long-term observations made by the Jicamarca incoherent scatter radar. We found that the climatological I–T models are able to drive many of the features of the plasma drifts including the diurnal, seasonal, altitudinal and solar cycle variability. We also identified discrepancies between modeled and observed drifts under certain conditions. This is, in particular, the case of vertical equatorial plasma drifts during low solar flux conditions, which were attributed to a poor specification of the E-region neutral wind dynamo. DINAMO is then used to quantify the impact of meridional currents on the morphology of F-region zonal plasma drifts. Analytic representations of the equatorial drifts are commonly used to interpret observations. These representations, however, commonly ignore contributions from meridional currents. Using DINAMO we show that that these currents can modify zonal plasma drifts by up to ~ 16 m/s in the bottom-side post-sunset F-region, and up to ~ 10 m/s between 0700 and 1000 LT for altitudes above 500 km. Finally, DINAMO results show the relationship between the pre-reversal enhancement (PRE) of the vertical drifts and the vertical shear in the zonal plasma drifts with implications for equatorial spread F.

scholarly journals Peculiarities of Neurostimulation by Intense Nanosecond Pulsed Electric Fields: How to Avoid Firing in Peripheral Nerve Fibers

2021 ◽  
Vol 22 (13) ◽  
pp. 7051
Author(s):  
Vitalii Kim ◽  
Emily Gudvangen ◽  
Oleg Kondratiev ◽  
Luis Redondo ◽  
Shu Xiao ◽  
...  
Keyword(s):  
Side Effects ◽  
Electric Fields ◽  
Pulsed Electric Fields ◽  
Opposite Polarity ◽  
Nerve Fibers ◽  
High Rate ◽  
Excitation Threshold ◽  
Compound Action Potentials ◽  
Supramaximal Stimulation ◽  
The Impact

Intense pulsed electric fields (PEF) are a novel modality for the efficient and targeted ablation of tumors by electroporation. The major adverse side effects of PEF therapies are strong involuntary muscle contractions and pain. Nanosecond-range PEF (nsPEF) are less efficient at neurostimulation and can be employed to minimize such side effects. We quantified the impact of the electrode configuration, PEF strength (up to 20 kV/cm), repetition rate (up to 3 MHz), bi- and triphasic pulse shapes, and pulse duration (down to 10 ns) on eliciting compound action potentials (CAPs) in nerve fibers. The excitation thresholds for single unipolar but not bipolar stimuli followed the classic strength–duration dependence. The addition of the opposite polarity phase for nsPEF increased the excitation threshold, with symmetrical bipolar nsPEF being the least efficient. Stimulation by nsPEF bursts decreased the excitation threshold as a power function above a critical duty cycle of 0.1%. The threshold reduction was much weaker for symmetrical bipolar nsPEF. Supramaximal stimulation by high-rate nsPEF bursts elicited only a single CAP as long as the burst duration did not exceed the nerve refractory period. Such brief bursts of bipolar nsPEF could be the best choice to minimize neuromuscular stimulation in ablation therapies.

scholarly journals Restraining Surface Charge Accumulation and Enhancing Surface Flashover Voltage through Dielectric Coating

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 750
Author(s):  
Jixing Sun ◽  
Sibo Song ◽  
Xiyu Li ◽  
Yunlong Lv ◽  
Jiayi Ren ◽  
...  
Keyword(s):  
Charge Transfer ◽  
Electric Field ◽  
Electric Fields ◽  
Transition Process ◽  
Metallic Particle ◽  
Particle Charging ◽  
Insulating Surfaces ◽  
Surface Flashover ◽  
Charging Time ◽  
The Impact

A conductive metallic particle in a gas-insulated metal-enclosed system can charge through conduction or induction and move between electrodes or on insulating surfaces, which may lead to breakdown and flashover. The charge on the metallic particle and the charging time vary depending on the spatial electric field intensity, the particle shape, and the electrode surface coating. The charged metallic particle can move between the electrodes under the influence of the spatial electric field, and it can discharge and become electrically conductive when colliding with the electrodes, thus changing its charge. This process and its factors are mainly affected by the coating condition of the colliding electrode. In addition, the interface characteristics affect the particle when it is near the insulator. The charge transition process also changes due to the electric field strength and the particle charging state. This paper explores the impact of the coating material on particle charging characteristics, movement, and discharge. Particle charging, movement, and charge transfer in DC, AC, and superimposed electric fields are summarized. Furthermore, the effects of conductive particles on discharge characteristics are compared between coated and bare electrodes. The reviewed studies demonstrate that the coating can effectively reduce particle charge and thus the probability of discharge. The presented research results can provide theoretical support and data for studying charge transfer theory and design optimization in a gas-insulated system.

scholarly journals Bond Between Steel and Self-Compacting Concrete in Composite Tube Columns

2017 ◽  
Vol 63 (2) ◽  
pp. 131-143
Author(s):  
M. Szadkowska ◽  
E. Szmigiera
Keyword(s):  
Vertical Shear ◽  
Self Compacting Concrete ◽  
Composite Tubes ◽  
Research Results ◽  
Composite Tube ◽  
Geometric Factors ◽  
The Impact

Abstract This paper presents research results of composite tubes filled with self-compacting concrete. The impact of the selected materials and geometric factors on resistance to the vertical shear was evaluated in this study. The resistance of the tested members was compared with recommendations given in Eurocode PN-EN 1994-1-1. From the results obtained in the tests it can be deduced that more parameters should be taken into consideration when determining resistance to the vertical shear in the interface between steel and concrete than PN-EN 1994- 1-1 recommends.

Impurity leakage and radiative cooling in the first nitrogen and neon seeding study in the slot divertor at DIII-D

2021 ◽  
Author(s):  
Livia Casali ◽  
David Eldon ◽  
Adam G McLean ◽  
Tom H Osborne ◽  
Anthony W Leonard ◽  
...  
Keyword(s):  
Experimental Studies ◽  
Mean Free Path ◽  
Flow Reversal ◽  
Momentum Balance ◽  
Ionization Source ◽  
Power Flux ◽  
Impurity Transport ◽  
Plasma Drifts ◽  
High Level ◽  
The Impact

Abstract A comparative study of nitrogen versus neon has been carried out to analyze the impact of the two radiative species on power dissipation, SOL impurity distribution, divertor and pedestal characteristics. The experimental results show that N remains compressed in the divertor, thereby providing high radiative losses without affecting the pedestal profiles and displacing carbon as dominant radiator. Neon, instead, radiates more upstream than N thus reducing the power flux through the separatrix leading to a reduced ELM frequency and compression in the divertor. A significant amount of neon is measured in the plasma core leading to a steeper density gradient. The different behaviour between the two impurities is confirmed by SOLPS-ITER modelling which for the first time at DIII-D includes multiple impurity species and a treatment of full drifts, currents and neutral-neutral collisions. The impurity transport in the SOL is studied in terms of the parallel momentum balance showing that N is mostly retained in the divertor whereas Ne leaks out consistent with its higher ionization potential and longer mean free path. This is also in agreement with the enrichment factor calculations which indicate lower divertor enrichment for neon. The strong ionization source characterizing the SAS divertor causes a reversal of the main ions and impurity flows. The flow reversal together with plasma drifts and the effect of the thermal force contribute significantly in the shift of the impurity stagnation point affecting impurity leakage. This work provides a demonstration of the impurity leakage mechanism in a closed divertor structure and the consequent impact on pedestal. Since carbon is an intrinsic radiator at DIII-D, in this paper we have also demonstrated the different role of carbon in the N vs Ne seeded cases both in the experiments and in the numerical modeling. Carbon contributes more when neon seeding is injected compared to when nitrogen is used. Finally, the results highlight the importance of accompanying experimental studies with numerical modelling of plasma flows, drifts and ionization profile to determine the details of the SOL impurity transport as the latter may vary with changes in divertor regime and geometry. In the cases presented here, plasma drifts and flow reversal caused by high level of closure in the slot upper divertor at DIII-D play an important role in the underlined mechanism.

Ephaptic Coupling in Hybrid Neuronal Model

2021 ◽  
Author(s):  
Gabriel Moreno Cunha ◽  
Gilberto Corso ◽  
José Garcia Vivas Miranda ◽  
Gustavo Zampier Dos Santos Lima
Keyword(s):  
Electric Fields ◽  
Action Potentials ◽  
Population Vector ◽  
Input Stimulus ◽  
Circular Statistic ◽  
Coupling Behavior ◽  
The Impact ◽  
The Brain ◽  
Ephaptic Coupling ◽  
Phase Differences

Abstract In recent decades, there has been growing interest in the impact of electric fields generated in the brain. Transmembrane ionic currents originate electric fields in the extracellular space and are capable of affecting nearby neurons, a phenomenon called ephaptic neuronal communication. In the present work, the Quadratic Integrate-and-Trigger model (QIF-E) underwent an adjustment/improvement to include the ephaptic coupling behavior between neurons and their results are compared to the empirical results. In this way, the analysis tools are employed according to the neuronal activity regime: (i) for the subthreshold regime, the circular statistic is used to describe the phase differences between the input stimulus signal and the modeled membrane response; (ii) in the suprathreshold regime, the Population Vector and the Spike Field Coherence are employed to estimate phase preferences and the coupling intensity between the input stimulus and the Action Potentials. The results observed are i) in the subthreshold regime the values of the phase differences change with distinct frequencies of an input stimulus; ii) in the supra-threshold regime the preferential phase of Action Potentials changes for different frequencies. In addition, we explore other parameters of the model, such as noise and membrane characteristic-time, in order to understand different types of neurons and extracellular environment related to ephaptic communication. Such results are consistent with results observed in empirical experiments based on ephaptic coupling behavior. In addition, the QIF-E model allows further studies on the physiological importance of ephaptic coupling in the brain, and its simplicity can open a door to simulating ephaptic coupling in neuron networks and evaluating the impact of ephaptic communication in such scenarios.

scholarly journals The Impact of Magnetic Field Temporal Sampling on Modeled Surface Electric Fields

Space Weather ◽  
2018 ◽  
Vol 16 (11) ◽  
pp. 1721-1739 ◽  
Author(s):  
Matthew A. Grawe ◽  
Jonathan J. Makela ◽  
Mark D. Butala ◽  
Farzad Kamalabadi
Keyword(s):  
Magnetic Field ◽  
Electric Fields ◽  
Temporal Sampling ◽  
The Impact

MODELING THE IMPACT OF PARTIAL INFORMATION SHARING IN A THREE-ECHELON SUPPLY CHAIN

2013 ◽  
Vol 30 (05) ◽  
pp. 1350020 ◽  
Author(s):  
ZHUPING LIU ◽  
QIUHONG ZHAO ◽  
SHOUYANG WANG ◽  
JIANMING SHI
Keyword(s):  
Supply Chain ◽  
Numerical Analysis ◽  
Information Sharing ◽  
Partial Information ◽  
Autoregressive Coefficient ◽  
The Impact

This paper investigates the impact of partial information sharing in a three-echelon supply chain. Partial information sharing means that information sharing occurs only between the distributor and the retailer, but not between the distributor and the manufacturer. This paper contributes to the literature by summarizing the circumstances in which information sharing between the retailer and the distributor benefits the manufacturer. In addition, our study points out that such information sharing does not always bring benefits to the manufacturer and that in some cases the information sharing may harm the manufacturer. We explain the reasons why this can happen and give managerial intuition for our results. Using numerical analysis, we illustrate the impact of partial information sharing on the agents in the supply chain with the change of the autoregressive coefficient in the demand process.

scholarly journals Numerical Analysis of the Impact on Dissolved Oxygen by the Breakwater in Ofunato Bay

2014 ◽  
Vol 70 (2) ◽  
pp. I_421-I_425
Author(s):  
Ken FURUDOI ◽  
Shigeki SAKAI ◽  
Kazuo MURAKAMI ◽  
Yoshiyuki NAKAMURA ◽  
Ikuo ABE ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Dissolved Oxygen ◽  
The Impact

Aeroelastic Tailoring of Helicopter Blades

2013 ◽  
Author(s):  
Donatien Cornette ◽  
Benjamin Kerdreux ◽  
Yves Gourinat ◽  
Guilhem Michon
Keyword(s):  
Dynamic Behaviour ◽  
Vertical Shear ◽  
Dynamic Loads ◽  
Modal Approach ◽  
Aeroelastic Tailoring ◽  
Helicopter Blades ◽  
Shear Modification ◽  
Elastic Couplings ◽  
The Impact ◽  
Aerodynamic Lift

The dynamic loads transmitted from the rotor to the airframe are responsible for vibrations, discomfort and alternate stress of components. A new and promising way to minimize vibration is to reduce dynamic loads at their source by performing an aeroelastic optimization of the rotor. This optimization is done thanks to couplings between the flapwise-bending motion and the torsion motion. The impact of elastic couplings (composite anisotropy) on the blade dynamic behaviour and on dynamic loads are evaluated in this paper. Firstly, analytical results, based on a purely linear modal approach, are given to understand the influence of those couplings in terms of frequency placement, aerodynamic lift load and vertical shear modification. Then, those elastic couplings are introduced on a simplified but representative blade (homogeneous beam with constant chord) and results are presented.

Sign in / Sign up

Export Citation Format

Share Document