scholarly journals Three-dimensional printed polylactic acid scaffold integrated with BMP-2 laden hydrogel for precise bone regeneration

2021 ◽  
Vol 25 (1) ◽  
Author(s):  
Misun Cha ◽  
Yuan-Zhe Jin ◽  
Jin Wook Park ◽  
Kyung Mee Lee ◽  
Shi Huan Han ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Polylactic Acid ◽  
Three Dimensional ◽  
Burst Release ◽  
Defect Model ◽  
Ectopic Ossification ◽  
Significant Difference ◽  
3D Printed

Abstract Background Critical bone defects remain challenges for clinicians, which cannot heal spontaneously and require medical intervention. Following the development of three-dimensional (3D) printing technology is widely used in bone tissue engineering for its outstanding customizability. The 3D printed scaffolds were usually accompanied with growth factors, such as bone morphometric protein 2 (BMP-2), whose effects have been widely investigated on bone regeneration. We previously fabricated and investigated the effect of a polylactic acid (PLA) cage/Biogel scaffold as a carrier of BMP-2. In this study, we furtherly investigated the effect of another shape of PLA cage/Biogel scaffold as a carrier of BMP-2 in a rat calvaria defect model and an ectopic ossification (EO) model. Method The PLA scaffold was printed with a basic commercial 3D printer, and the PLA scaffold was combined with gelatin and alginate-based Biogel and BMP-2 to induce bone regeneration. The experimental groups were divided into PLA scaffold, PLA scaffold with Biogel, PLA scaffold filled with BMP-2, and PLA scaffold with Biogel and BMP-2 and were tested both in vitro and in vivo. One-way ANOVA with Bonferroni post-hoc analysis was used to determine whether statistically significant difference exists between groups. Result The in vitro results showed the cage/Biogel scaffold released BMP-2 with an initial burst release and followed by a sustained slow-release pattern. The released BMP-2 maintained its osteoinductivity for at least 14 days. The in vivo results showed the cage/Biogel/BMP-2 group had the highest bone regeneration in the rat calvarial defect model and EO model. Especially, the bone regenerated more regularly in the EO model at the implanted sites, which indicated the cage/Biogel had an outstanding ability to control the shape of regenerated bone. Conclusion In conclusion, the 3D printed PLA cage/Biogel scaffold system was proved to be a proper carrier for BMP-2 that induced significant bone regeneration and induced bone formation following the designed shape.

scholarly journals Three-Dimensional Zirconia-Based Scaffolds for Load-Bearing Bone-Regeneration Applications: Prospects and Challenges

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3207
Author(s):  
Kumaresan Sakthiabirami ◽  
Vaiyapuri Soundharrajan ◽  
Jin-Ho Kang ◽  
Yunzhi Peter Yang ◽  
Sang-Won Park
Keyword(s):  
Bone Regeneration ◽  
Biological Activities ◽  
Three Dimensional ◽  
In Vivo Studies ◽  
High Mechanical Strength ◽  
Real World Applications ◽  
3D Fabrication ◽  
Dental Applications

The design of zirconia-based scaffolds using conventional techniques for bone-regeneration applications has been studied extensively. Similar to dental applications, the use of three-dimensional (3D) zirconia-based ceramics for bone tissue engineering (BTE) has recently attracted considerable attention because of their high mechanical strength and biocompatibility. However, techniques to fabricate zirconia-based scaffolds for bone regeneration are in a stage of infancy. Hence, the biological activities of zirconia-based ceramics for bone-regeneration applications have not been fully investigated, in contrast to the well-established calcium phosphate-based ceramics for bone-regeneration applications. This paper outlines recent research developments and challenges concerning numerous three-dimensional (3D) zirconia-based scaffolds and reviews the associated fundamental fabrication techniques, key 3D fabrication developments and practical encounters to identify the optimal 3D fabrication technique for obtaining 3D zirconia-based scaffolds suitable for real-world applications. This review mainly summarized the articles that focused on in vitro and in vivo studies along with the fundamental mechanical characterizations on the 3D zirconia-based scaffolds.

Melatonin decorated 3D-printed beta-tricalcium phosphate scaffolds promoting bone regeneration in a rat calvarial defect model

2019 ◽  
Vol 7 (20) ◽  
pp. 3250-3259 ◽  
Author(s):  
Yali Miao ◽  
Yunhua Chen ◽  
Xiao Liu ◽  
Jingjing Diao ◽  
Naru Zhao ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Tricalcium Phosphate ◽  
Calvarial Defect ◽  
Defect Model ◽  
Beta Tricalcium Phosphate ◽  
3D Printed ◽  
Rat Calvarial Defect

3D-printed β-TCP scaffolds decorated with melatonin via dopamine mussel-inspired chemistry enhance the osteogenesis and in vivo bone regeneration.

scholarly journals In Vitro and In Vivo Evaluation of a Three-Dimensional Porous Multi-Walled Carbon Nanotube Scaffold for Bone Regeneration

Nanomaterials ◽  
2017 ◽  
Vol 7 (2) ◽  
pp. 46 ◽  
Author(s):  
Manabu Tanaka ◽  
Yoshinori Sato ◽  
Mei Zhang ◽  
Hisao Haniu ◽  
Masanori Okamoto ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Bone Regeneration ◽  
Three Dimensional ◽  
In Vivo Evaluation ◽  
Multi Walled Carbon Nanotube

scholarly journals The Effects of Atmospheric Pressure Argon Plasma Treated Bovine Bone Substitute on Bone Regeneration

Coatings ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 790
Author(s):  
Jong-Ju Ahn ◽  
Ji-Hyun Yoo ◽  
Eun-Bin Bae ◽  
Gyoo-Cheon Kim ◽  
Jae Joon Hwang ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Atmospheric Pressure ◽  
Bone Substitute ◽  
Argon Plasma ◽  
Atmospheric Pressure Plasma ◽  
Regeneration Ability ◽  
Bovine Bone ◽  
Significant Difference

This study was undertaken to compare new bone formation between non-expired and expired bovine-derived xenogeneic bone substitute (expired, out-of-use period) and to evaluate the efficacy of argon (Ar)-based atmospheric pressure plasma (APP) treatment on expired bone substitute in rat calvarial defect. The groups were divided into (1) Non/Expired group (Using regular xenografts), (2) Expired group (Using expired xenografts), and (3) Ar/Expired group (Using Ar-based APP treated expired xenografts). Surface observation and cell experiments were performed in vitro. Twelve rats were used for in vivo experiment and the bony defects were created on the middle of the cranium. The bone substitute of each group was implanted into the defective site. After 4 weeks, all the rats were sacrificed, and the volumetric, histologic, and histometric analyses were performed. In the results of osteogenic differentiation and mineralization, Non/Expired and Ar/Expired groups were significantly higher than Expired group (p < 0.05). However, there was no significant difference between groups in the animal study (p > 0.05). Within the limitations of this study, the surface treatment of Ar-based APP has a potential effect on the surface modification of bone grafts. However, there was no significant difference in bone regeneration ability between groups in vivo; thus, studies on APP to enhance bone regeneration should be carried out in the future.

scholarly journals Biomaterials with structural hierarchy and controlled 3D nanotopography guide endogenous bone regeneration

2021 ◽  
Vol 7 (31) ◽  
pp. eabg3089
Author(s):  
Shixuan Chen ◽  
Hongjun Wang ◽  
Valerio Luca Mainardi ◽  
Giuseppe Talò ◽  
Alec McCarthy ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Three Dimensional ◽  
Cranial Bone ◽  
Mineral Density ◽  
Structural Hierarchy ◽  
Packed Structure ◽  
Inorganic Mineral ◽  
Distribution Of Stress

Biomaterials without exogenous cells or therapeutic agents often fail to achieve rapid endogenous bone regeneration with high quality. Here, we reported a class of three-dimensional (3D) nanofiber scaffolds with hierarchical structure and controlled alignment for effective endogenous cranial bone regeneration. 3D scaffolds consisting of radially aligned nanofibers guided and promoted the migration of bone marrow stem cells from the surrounding region to the center in vitro. These scaffolds showed the highest new bone volume, surface coverage, and mineral density among the tested groups in vivo. The regenerated bone exhibited a radially aligned fashion, closely recapitulating the scaffold’s architecture. The organic phase in regenerated bone showed an aligned, layered, and densely packed structure, while the inorganic mineral phase showed a uniform distribution with smaller pore size and an even distribution of stress upon the simulated compression. We expect that this study will inspire the design of next-generation biomaterials for effective endogenous bone regeneration with desired quality.

scholarly journals Biodegradable Zn–Sr alloy for bone regeneration in rat femoral condyle defect model: In vitro and in vivo studies

2021 ◽  
Vol 6 (6) ◽  
pp. 1588-1604
Author(s):  
Bo Jia ◽  
Hongtao Yang ◽  
Zechuan Zhang ◽  
Xinhua Qu ◽  
Xiufeng Jia ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Femoral Condyle ◽  
In Vivo Studies ◽  
Defect Model

Three-Dimensional-Printed External Scaffolds Mitigate Loss of Volume and Topography in Engineered Elastic Cartilage Constructs

Cartilage ◽  
2021 ◽  
pp. 194760352110495
Author(s):  
Xue Dong ◽  
Ishani D. Premaratne ◽  
Jaime L. Bernstein ◽  
Arash Samadi ◽  
Alexandra J. Lin ◽  
...  
Keyword(s):  
Injection Molding ◽  
Type I Collagen ◽  
Three Dimensional ◽  
Type I ◽  
Base Area ◽  
Elastic Cartilage ◽  
3D Printed ◽  
Injection Molded

Objective: A major obstacle in the clinical translation of engineered auricular scaffolds is the significant contraction and loss of topography that occur during maturation of the soft collagen-chondrocyte matrix into elastic cartilage. We hypothesized that 3-dimensional-printed, biocompatible scaffolds would “protect” maturing hydrogel constructs from contraction and loss of topography. Design: External disc-shaped and “ridged” scaffolds were designed and 3D-printed using polylactic acid (PLA). Acellular type I collagen constructs were cultured in vitro for up to 3 months. Collagen constructs seeded with bovine auricular chondrocytes (BAuCs) were prepared in 3 groups and implanted subcutaneously in vivo for 3 months: preformed discs with (“Scaffolded/S”) or without (“Naked/N”) an external scaffold and discs that were formed within an external scaffold via injection molding (“Injection Molded/SInj”). Results: The presence of an external scaffold or use of injection molding methodology did not affect the acellular construct volume or base area loss. In vivo, the presence of an external scaffold significantly improved preservation of volume and base area at 3 months compared to the naked group ( P < 0.05). Construct contraction was mitigated even further in the injection molded group, and topography of the ridged constructs was maintained with greater fidelity ( P < 0.05). Histology verified the development of mature auricular cartilage in the constructs within external scaffolds after 3 months. Conclusion: Custom-designed, 3D-printed, biocompatible external scaffolds significantly mitigate BAuC-seeded construct contraction and maintain complex topography. Further refinement and scaling of this approach in conjunction with construct fabrication utilizing injection molding may aid in the development of full-scale auricular scaffolds.

scholarly journals In Vitro and In Vivo Evaluation of Commercially Available Fibrin Gel as a Carrier of Alendronate for Bone Tissue Engineering

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Beom Su Kim ◽  
Feride Shkembi ◽  
Jun Lee
Keyword(s):  
Bone Regeneration ◽  
Osteogenic Differentiation ◽  
Release Kinetics ◽  
Human Mesenchymal Stem Cells ◽  
Calvarial Defect ◽  
Defect Model ◽  
Fibrin Gel ◽  
In Vivo Evaluation

Alendronate (ALN) is a bisphosphonate drug that is widely used for the treatment of osteoporosis. Furthermore, local delivery of ALN has the potential to improve the bone regeneration. This study was designed to investigate an ALN-containing fibrin (fibrin/ALN) gel and evaluate the effect of this gel on both in vitro cellular behavior using human mesenchymal stem cells (hMSCs) and in vivo bone regenerative capacity. Fibrin hydrogels were fabricated using various ALN concentrations (10−7–10−4 M) with fibrin glue and the morphology, mechanical properties, and ALN release kinetics were characterized. Proliferation and osteogenic differentiation of and cytotoxicity in fibrin/ALN gel-embedded hMSCs were examined. In vivo bone formation was evaluated using a rabbit calvarial defect model. The fabricated fibrin/ALN gel was transparent with Young’s modulus of ~13 kPa, and these properties were not affected by ALN concentration. The in vitro studies showed sustained release of ALN from the fibrin gel and revealed that hMSCs cultured in fibrin/ALN gel showed significantly increased proliferation and osteogenic differentiation. In addition, microcomputed tomography and histological analysis revealed that the newly formed bone was significantly enhanced by implantation of fibrin/ALN gel in a calvarial defect model. These results suggest that fibrin/ALN has the potential to improve bone regeneration.

scholarly journals The Effect of Stromal-Derived Factor 1α on Osteoinduction Properties of Porous β-Tricalcium Phosphate Bioceramics

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Fangchun Jin ◽  
Qixun Cai ◽  
Wei Wang ◽  
Xiaohui Fan ◽  
Xiao Lu ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Tricalcium Phosphate ◽  
Tissue Repair ◽  
In Vivo Studies ◽  
New Bone Formation ◽  
Defect Model ◽  
Rabbit Bone ◽  
In Vitro Effects

β-Tricalcium phosphate (TCP) is a type of bioceramic material which is commonly used for hard tissue repair and famous of its remarkable biocompatibility and osteoconductivity with similar composition to natural bone. However, TCP lacks osteoindcutive properties. Stromal-derived factor 1α (SDF-1α) can promote bone regeneration with excellent osteoinduction effect. In this study, SDF-1α was loaded into TCP to investigate the in vitro effects of SDF-1α on the osteoinductive properties of TCP. In vitro studies showed that SDF-1α/TCP scaffold significantly stimulated the expression of osteopontin and osteocalcin. As to the in vivo studies, the rabbit bone defect model showed that SDF-1α stimulated more new bone formation. In conclusion, SDF-1α/TCP bioceramic scaffolds could further promote bone regeneration compared to pure TCP bioceramics.

Sign in / Sign up

Export Citation Format

Share Document