Three-Dimensional-Printed External Scaffolds Mitigate Loss of Volume and Topography in Engineered Elastic Cartilage Constructs

Cartilage ◽  
2021 ◽  
pp. 194760352110495
Author(s):  
Xue Dong ◽  
Ishani D. Premaratne ◽  
Jaime L. Bernstein ◽  
Arash Samadi ◽  
Alexandra J. Lin ◽  
...  
Keyword(s):  
Injection Molding ◽  
Type I Collagen ◽  
Three Dimensional ◽  
Type I ◽  
Base Area ◽  
Elastic Cartilage ◽  
3D Printed ◽  
Injection Molded

Objective: A major obstacle in the clinical translation of engineered auricular scaffolds is the significant contraction and loss of topography that occur during maturation of the soft collagen-chondrocyte matrix into elastic cartilage. We hypothesized that 3-dimensional-printed, biocompatible scaffolds would “protect” maturing hydrogel constructs from contraction and loss of topography. Design: External disc-shaped and “ridged” scaffolds were designed and 3D-printed using polylactic acid (PLA). Acellular type I collagen constructs were cultured in vitro for up to 3 months. Collagen constructs seeded with bovine auricular chondrocytes (BAuCs) were prepared in 3 groups and implanted subcutaneously in vivo for 3 months: preformed discs with (“Scaffolded/S”) or without (“Naked/N”) an external scaffold and discs that were formed within an external scaffold via injection molding (“Injection Molded/SInj”). Results: The presence of an external scaffold or use of injection molding methodology did not affect the acellular construct volume or base area loss. In vivo, the presence of an external scaffold significantly improved preservation of volume and base area at 3 months compared to the naked group ( P < 0.05). Construct contraction was mitigated even further in the injection molded group, and topography of the ridged constructs was maintained with greater fidelity ( P < 0.05). Histology verified the development of mature auricular cartilage in the constructs within external scaffolds after 3 months. Conclusion: Custom-designed, 3D-printed, biocompatible external scaffolds significantly mitigate BAuC-seeded construct contraction and maintain complex topography. Further refinement and scaling of this approach in conjunction with construct fabrication utilizing injection molding may aid in the development of full-scale auricular scaffolds.

Morphological and Functional Characteristics of Three-Dimensional Engineered Bone-Ligament-Bone Constructs Following Implantation

2009 ◽  
Vol 131 (10) ◽  
Author(s):  
Jinjin Ma ◽  
Kristen Goble ◽  
Michael Smietana ◽  
Tatiana Kostrominova ◽  
Lisa Larkin ◽  
...  
Keyword(s):  
Bone Marrow ◽  
Type I Collagen ◽  
Three Dimensional ◽  
Functionally Graded ◽  
Neonatal Rat ◽  
Ligament Injury ◽  
Type I ◽  
Tangent Moduli

The incidence of ligament injury has recently been estimated at 400,000/year. The preferred treatment is reconstruction using an allograft, but outcomes are limited by donor availability, biomechanical incompatibility, and immune rejection. The creation of an engineered ligament in vitro solely from patient bone marrow stromal cells (has the potential to greatly enhance outcomes in knee reconstructions. Our laboratory has developed a scaffoldless method to engineer three-dimensional (3D) ligament and bone constructs from rat bone marrow stem cells in vitro. Coculture of these two engineered constructs results in a 3D bone-ligament-bone (BLB) construct with viable entheses, which was successfully used for medial collateral ligament (MCL) replacement in a rat model. 1 month and 2 month implantations were applied to the engineered BLBs. Implantation of 3D BLBs in a MCL replacement application demonstrated that our in vitro engineered tissues grew and remodeled quickly in vivo to an advanced phenotype and partially restored function of the knee. The explanted 3D BLB ligament region stained positively for type I collagen and elastin and was well vascularized after 1 and 2 months in vivo. Tangent moduli of the ligament portion of the 3D BLB 1 month explants increased by a factor of 2.4 over in vitro controls, to a value equivalent to those observed in 14-day-old neonatal rat MCLs. The 3D BLB 1 month explants also exhibited a functionally graded response that closely matched native MCL inhomogeneity, indicating the constructs functionally adapted in vivo.

scholarly journals Crosstalk between invadopodia and the extracellular matrix

2020 ◽  
Author(s):  
Shinji Iizuka ◽  
Ronald P. Leon ◽  
Kyle P. Gribbin ◽  
Ying Zhang ◽  
Jose Navarro ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Type I Collagen ◽  
Complex Structure ◽  
Three Dimensional ◽  
3D Culture ◽  
Model Systems ◽  
Type I ◽  
Extracellular Matrix Components

ABSTRACTThe scaffold protein Tks5α is required for invadopodia-mediated cancer invasion both in vitro and in vivo. We have previously also revealed a role for Tks5 in tumor cell growth using three-dimensional (3D) culture model systems and mouse transplantation experiments. Here we use both 3D and high-density fibrillar collagen (HDFC) culture to demonstrate that native type I collagen, but not a form lacking the telopeptides, stimulated Tks5-dependent growth, which was dependent on the DDR collagen receptors. We used microenvironmental microarray (MEMA) technology to determine that laminin, collagen I, fibronectin and tropoelastin also stimulated invadopodia formation. A Tks5α-specific monoclonal antibody revealed its expression both on microtubules and at invadopodia. High- and super-resolution microscopy of cells in and on collagen was then used to place Tks5α at the base of invadopodia, separated from much of the actin and cortactin, but coincident with both matrix metalloprotease and cathepsin proteolytic activity. Inhibition of the Src family kinases, cathepsins or metalloproteases all reduced invadopodia length but each had distinct effects on Tks5α localization. These studies highlight the crosstalk between invadopodia and extracellular matrix components, and reveal the invadopodium to be a spatially complex structure.

scholarly journals 3D Printed In Vitro Dentin Model to Investigate Occlusive Agents against Tooth Sensitivity

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7255
Author(s):  
Shiva Naseri ◽  
Megan E. Cooke ◽  
Derek H. Rosenzweig ◽  
Maryam Tabrizian
Keyword(s):  
3D Printing ◽  
Type I Collagen ◽  
Three Dimensional ◽  
Raw Material ◽  
Type I ◽  
Dentinal Tubule ◽  
Human Teeth ◽  
Tooth Sensitivity ◽  
3D Printed

Tooth sensitivity is a painful and very common problem. Often stimulated by consuming hot, cold, sweet, or acidic foods, it is associated with exposed dentin microtubules that are open to dental pulp. One common treatment for tooth hypersensitivity is the application of occlusive particles to block dentin microtubules. The primary methodology currently used to test the penetration and occlusion of particles into dentin pores relies upon dentin discs cut from extracted bovine/human teeth. However, this method is limited due to low accessibility to the raw material. Thus, there is a need for an in vitro dentin model to characterize the effectiveness of occlusive agents. Three-dimensional printing technologies have emerged that make the printing of dentin-like structures possible. This study sought to develop and print a biomaterial ink that mimicked the natural composition and structure of dentin tubules. A formulation of type I collagen (Col), nanocrystalline hydroxyapatite (HAp), and alginate (Alg) was found to be suitable for the 3D printing of scaffolds. The performance of the 3D printed dentin model was compared to the natural dentin disk by image analysis via scanning electron microscopy (SEM), both pre- and post-treatment with occlusive microparticles, to evaluate the degree of dentinal tubule occlusion. The cytocompatibility of printed scaffolds was also confirmed in vitro. This is a promising biomaterial system for the 3D printing of dentin mimics.

A Collagen/DBP Sponge System Designed for in Vitro Analysis of Chondroinduction

1991 ◽  
Vol 252 ◽  
Author(s):  
Shuichi Mizuno ◽  
Chris Lycette ◽  
Charlene Quinto ◽  
Julie Glowacki
Keyword(s):  
Type I Collagen ◽  
Three Dimensional ◽  
Dermal Fibroblasts ◽  
Type I ◽  
Cellular Mechanisms ◽  
Fresh Tissue ◽  
Freeze Dried ◽  
Bone Powder

ABSTRACTIn response to subcutaneous implants of demineralized bone powder (DBP), cells are attracted to the DBP, are converted to chondroblasts, and produce a cartilage matrix that is resorbed and replaced by bone. In order to define the cellular mechanisms of this induction, we developed a collagen sponge model for simulating the in vivo environment and for promoting the ingrowth and viability of cells cultured in them in vitro. Reconstituted pepsin–digested type I collagen from bovine hide was neutralized. Rat DBP (75–250 εm) was added into the collagen mixture (20 mg/ml). In order to simulate the connective tissue environment, modified chondroitin sulfate, heparan sulfate, or hyaluronic acid was added into the mixture. Aliquots (0.2 ml) were placed in 3/8 inch diameter molds and freeze-dried. Human dermal fibroblasts were cultured from minced fresh tissue and inoculated at 1.5 × 105 cells/sponge. Fifteen hours later, some sponges were transferred to medium which contained growth factors (PDGF or TGF-β). At intervals, samples were examined histologically. The inoculated cells attached to the collagen fibers and migrated into the sponge. Eventually the sponges contracted and acquired an oval shape. Cells on or near DBP were ovoid or stellate in shape. Cell morphology was modulated by glycosaminoglycan composition of the sponge. Increasing doses of PDGF or TGF-β promoted cellularity within the sponges. In conclusion, this system simulates the in vivo environment but allows accessibility for analysis. This three-dimensional matrix culture system will enable investigation of mechanisms of chondroinduction by morphogenic material.

scholarly journals Fibrin and Collagen Differentially but Synergistically Regulate Sprout Angiogenesis of Human Dermal Microvascular Endothelial Cells in 3-Dimensional Matrix

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Xiaodong Feng ◽  
Marcia G. Tonnesen ◽  
Shaker A. Mousa ◽  
Richard A. F. Clark
Keyword(s):  
Extracellular Matrix ◽  
Endothelial Cells ◽  
Type I Collagen ◽  
Three Dimensional ◽  
Tumor Stroma ◽  
Microvascular Endothelial Cells ◽  
Type I ◽  
Microvascular Endothelial

Angiogenesis is a highly regulated event involving complex, dynamic interactions between microvascular endothelial cells and extracellular matrix (ECM) proteins. Alteration of ECM composition and architecture is a hallmark feature of wound clot and tumor stroma. We previously reported that during angiogenesis, endothelial cell responses to growth factors are modulated by the compositional and mechanical properties of a surrounding three-dimensional (3D) extracellular matrix (ECM) that is dominated by either cross-linked fibrin or type I collagen. However, the role of 3D ECM in the regulation of angiogenesis associated with wound healing and tumor growth is not well defined. This study investigates the correlation of sprout angiogenesis and ECM microenvironment using in vivo and in vitro 3D angiogenesis models. It demonstrates that fibrin and type I collagen 3D matrices differentially but synergistically regulate sprout angiogenesis. Thus blocking both integrin alpha v beta 3 and integrin alpha 2 beta 1 might be a novel strategy to synergistically block sprout angiogenesis in solid tumors.

scholarly journals Functional regeneration of tendons using scaffolds with physical anisotropy engineered via microarchitectural manipulation

2018 ◽  
Vol 4 (10) ◽  
pp. eaat4537 ◽  
Author(s):  
Z. Wang ◽  
W. J. Lee ◽  
B. T. H. Koh ◽  
M. Hong ◽  
W. Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Type I Collagen ◽  
Three Dimensional ◽  
Type I ◽  
High Porosity ◽  
Cytoskeletal Network ◽  
Function Relationship ◽  
Living Tissues

Structural and hierarchical anisotropy underlies the structure-function relationship of most living tissues. Attempts to exploit the interplay between cells and their immediate environment have rarely featured macroscale, three-dimensional constructs required for clinical applications. Furthermore, compromises to biomechanical robustness during fabrication often limit the scaffold’s relevance in translational medicine. We report a polymeric three-dimensional scaffold with tendon-like mechanical properties and controlled anisotropic microstructures. The scaffold was composed of two distinct portions, which enabled high porosity while retaining tendon-like mechanical properties. When tenocytes were cultured in vitro on the scaffold, phenotypic markers of tenogenesis such as type-I collagen, decorin, and tenascin were significantly expressed over nonanisotropic controls. Moreover, highly aligned intracellular cytoskeletal network and high nuclear alignment efficiencies were observed, suggesting that microstructural anisotropy might play the epigenetic role of mechanotransduction. When implanted in an in vivo micropig model, a neotissue that formed over the scaffold resembled native tendon tissue in composition and structure.

scholarly journals Effects of chitosan-collagen dressing on wound healing in vitro and in vivo assays

2021 ◽  
Vol 19 ◽  
pp. 228080002198969
Author(s):  
Min-Xia Zhang ◽  
Wan-Yi Zhao ◽  
Qing-Qing Fang ◽  
Xiao-Feng Wang ◽  
Chun-Ye Chen ◽  
...  
Keyword(s):  
Wound Healing ◽  
Wound Dressing ◽  
Type I Collagen ◽  
Inhibition Zone ◽  
Negative Control ◽  
Type I ◽  
Nih3t3 Cells ◽  
Post Operation

The present study was designed to fabricate a new chitosan-collagen sponge (CCS) for potential wound dressing applications. CCS was fabricated by a 3.0% chitosan mixture with a 1.0% type I collagen (7:3(w/w)) through freeze-drying. Then the dressing was prepared to evaluate its properties through a series of tests. The new-made dressing demonstrated its safety toward NIH3T3 cells. Furthermore, the CCS showed the significant surround inhibition zone than empty controls inoculated by E. coli and S. aureus. Moreover, the moisture rates of CCS were increased more rapidly than the collagen and blank sponge groups. The results revealed that the CCS had the characteristics of nontoxicity, biocompatibility, good antibacterial activity, and water retention. We used a full-thickness excisional wound healing model to evaluate the in vivo efficacy of the new dressing. The results showed remarkable healing at 14th day post-operation compared with injuries treated with collagen only as a negative control in addition to chitosan only. Our results suggest that the chitosan-collagen wound dressing were identified as a new promising candidate for further wound application.

Vitamin K promotes mineralization, osteoblast-to-osteocyte transition, and an anticatabolic phenotype by γ-carboxylation-dependent and -independent mechanisms

2009 ◽  
Vol 297 (6) ◽  
pp. C1358-C1367 ◽  
Author(s):  
Gerald J. Atkins ◽  
Katie J. Welldon ◽  
Asiri R. Wijenayaka ◽  
Lynda F. Bonewald ◽  
David M. Findlay
Keyword(s):  
Bone Formation ◽  
Vitamin K ◽  
Type I Collagen ◽  
Vitamin K2 ◽  
Type I ◽  
Vitamin K1 ◽  
Vitamin K3 ◽  
Positive Effect

The vitamin K family members phylloquinone (vitamin K1) and the menaquinones (vitamin K2) are under study for their roles in bone metabolism and as potential therapeutic agents for skeletal diseases. We have investigated the effects of two naturally occurring homologs, phytonadione (vitamin K1) and menatetrenone (vitamin K2), and those of the synthetic vitamin K, menadione (vitamin K3), on human primary osteoblasts. All homologs promoted in vitro mineralization by these cells. Vitamin K1-induced mineralization was highly sensitive to warfarin, whereas that induced by vitamins K2 and K3 was less sensitive, implying that γ-carboxylation and other mechanisms, possibly genomic actions through activation of the steroid xenobiotic receptor, are involved in the effect. The positive effect on mineralization was associated with decreased matrix synthesis, evidenced by a decrease from control in expression of type I collagen mRNA, implying a maturational effect. Incubation in the presence of vitamin K2 or K3 in a three-dimensional type I collagen gel culture system resulted in increased numbers of cells with elongated cytoplasmic processes resembling osteocytes. This effect was not warfarin sensitive. Addition of calcein to vitamin K-treated cells revealed vitamin K-dependent deposition of mineral associated with cell processes. These effects are consistent with vitamin K promoting the osteoblast-to-osteocyte transition in humans. To test whether vitamin K may also act on mature osteocytes, we tested the effects of vitamin K on MLO-Y4 cells. Vitamin K reduced receptor activator of NF-κB ligand expression relative to osteoprotegerin by MLO-Y4 cells, an effect also seen in human cultures. Together, our findings suggest that vitamin K promotes the osteoblast-to-osteocyte transition, at the same time decreasing the osteoclastogenic potential of these cells. These may be mechanisms by which vitamin K optimizes bone formation and integrity in vivo and may help explain the net positive effect of vitamin K on bone formation.

Cells in regenerating deer antler cartilage provide a microenvironment that supports osteoclast differentiation

2001 ◽  
Vol 204 (3) ◽  
pp. 443-455
Author(s):  
C. Faucheux ◽  
S. Nesbitt ◽  
M. Horton ◽  
J. Price
Keyword(s):  
Type I Collagen ◽  
Mononuclear Cells ◽  
Osteoclast Differentiation ◽  
Cathepsin K ◽  
Collagen Matrix ◽  
Tartrate Resistant Acid Phosphatase ◽  
Type I ◽  
Deer Antler

Deer antlers are a rare example of mammalian epimorphic regeneration. Each year, the antlers re-grow by a modified endochondral ossification process that involves extensive remodelling of cartilage by osteoclasts. This study identified regenerating antler cartilage as a site of osteoclastogenesis in vivo. An in vitro model was then developed to study antler osteoclast differentiation. Cultured as a high-density micromass, cells from non-mineralised cartilage supported the differentiation of large numbers of osteoclast-like multinucleated cells (MNCs) in the absence of factors normally required for osteoclastogenesis. After 48 h of culture, tartrate-resistant acid phosphatase (TRAP)-positive mononuclear cells (osteoclast precursors) were visible, and by day 14 a large number of TRAP-positive MNCs had formed (783+/−200 per well, mean +/− s.e.m., N=4). Reverse transcriptase/polymerase chain reaction (RT-PCR) showed that receptor activator of NF κ B ligand (RANKL) and macrophage colony stimulating factor (M-CSF) mRNAs were expressed in micromass cultures. Antler MNCs have the phenotype of osteoclasts from mammalian bone; they expressed TRAP, vitronectin and calcitonin receptors and, when cultured on dentine, formed F-actin rings and large resorption pits. When cultured on glass, antler MNCs appeared to digest the matrix of the micromass and endocytose type I collagen. Matrix metalloproteinase-9 (MMP-9) may play a role in the resorption of this non-mineralised matrix since it is highly expressed in 100 % of MNCs. In contrast, cathepsin K, another enzyme expressed in osteoclasts from bone, is only highly expressed in resorbing MNCs cultured on dentine. This study identifies the deer antler as a valuable model that can be used to study the differentiation and function of osteoclasts in adult regenerating mineralised tissues.

Tissue specificity of type I collagen gene expression is determined at both transcriptional and post-transcriptional levels

1984 ◽  
Vol 4 (9) ◽  
pp. 1843-1852
Author(s):  
R J Focht ◽  
S L Adams
Keyword(s):  
Gene Expression ◽  
Rna Structure ◽  
Type I Collagen ◽  
Translational Efficiency ◽  
Type I ◽  
Collagen Gene ◽  
Differentiated Cells ◽  
Collagen Gene Expression

We analyzed the control of type I collagen synthesis in four kinds of differentiated cells from chicken embryos which synthesize very different amounts of the protein. Tendon, skin, and smooth muscle cells were found to have identical amounts of type I collagen RNAs; however, the RNAs had inherently different translatabilities, which were observed both in vivo and in vitro. Chondrocytes also had substantial amounts of type I collagen RNAs, even though they directed no detectable synthesis of the protein either in vivo or in vitro. Type I collagen RNAs in chondrocytes display altered electrophoretic mobilities, suggesting that in these cells the reduction in translational efficiency may be mediated in part by changes in the RNA structure. These data indicate that control of type I collagen gene expression is a complex process which is exerted at both transcriptional and post-transcriptional levels.

Sign in / Sign up

Export Citation Format

Share Document