scholarly journals Nano-imprinted subwavelength gratings as polarizing beamsplitters

2021 ◽  
Vol 17 (1) ◽  
Author(s):  
Julian Wüster ◽  
Yannick Bourgin ◽  
Patrick Feßer ◽  
Arne Behrens ◽  
Stefan Sinzinger
Keyword(s):  
Nanoimprint Lithography ◽  
Optical Measurement ◽  
Design Method ◽  
Optical Systems ◽  
Surface Metrology ◽  
Measurement Systems ◽  
Common Path ◽  
Dielectric Coatings ◽  
Subwavelength Gratings ◽  
Wide Range

AbstractPolarizing beamsplitters have numerous applications in optical systems, such as systems for freeform surface metrology. They are classically manufactured from birefringent materials or with stacks of dielectric coatings. We present a binary subwavelength-structured form-birefringent diffraction grating, which acts as a polarizing beamsplitter for a wide range of incidence angles −30∘…+30∘. We refine the general design method for such hybrid gratings. We furthermore demonstrate the manufacturing steps with Soft-UV-Nanoimprint-Lithography, as well as the experimental verification, that the structure reliably acts as a polarizing beamsplitter. The experimental results show a contrast in efficiency for TE- and TM-polarization of up to 1:18 in the first order, and 34:1 in the zeroth order. The grating potentially enables us to realize integrated compact optical measurement systems, such as common-path interferometers.

The Development of a Reference Material for Calibration of Full-Field Optical Measurement Systems for Dynamic Deformation Measurements

2011 ◽  
Vol 70 ◽  
pp. 33-38 ◽  
Author(s):  
Andrea Davighi ◽  
Richard L. Burguete ◽  
Mara Feligiotti ◽  
Erwin Hack ◽  
Simon James ◽  
...  
Keyword(s):  
Reference Material ◽  
Optical Measurement ◽  
Three Dimensional ◽  
Speckle Interferometry ◽  
Optical Systems ◽  
Measured Quantity ◽  
Full Field ◽  
Measurement Systems ◽  
Definition Of ◽  
Generic Design

A reference material is defined as material, sufficiently homogeneous and stable with respect to one or more specified properties, which has been established to be fit for its intended use in a measurement process. Reference materials provide a simple definition of the measured quantity that can be traced to an international standard and can be used to assess the uncertainty associated with a measurement system. Previous work established a reference material and procedure for calibrating full-field optical systems suitable for measuring static, in-plane strain distributions. Efforts are now underway to extend this work to the calibration of systems capable of measuring three-dimensional deformation fields induced by dynamic loading. The important attributes for a dynamic reference material have been identified in a systematic and rational fashion, which have been subsequently translated into a generic design specification. Initial prototypes of candidate designs have been produced and evaluated using experimental modal analysis and digital speckle interferometry, and the results have been compared with finite element analyses. Based on the outcome of this initial evaluation, further refinements in design and manufacturing are proposed.

Optical In-Situ Assessment of a Nonimaging Secondary Concentrator in a Solar Tower

2002 ◽  
Vol 124 (3) ◽  
pp. 223-229 ◽  
Author(s):  
Abraham Kribus ◽  
Andreas Timinger
Keyword(s):  
Ray Tracing ◽  
Tilt Angle ◽  
Linear Dimension ◽  
Optical Measurement ◽  
Measurement Procedure ◽  
Optical Systems ◽  
Wide Range ◽  
Ray Tracing Simulation ◽  
Actual Geometry

A method for remote optical measurement of the geometry of nonimaging concentrators is presented. A concentrator installed in a solar tower was measured by observation of transmission patterns from the heliostat field, and comparison of the measured patterns to a ray tracing simulation. The actual geometry of the concentrator was derived from optimization of the match between real and simulated patterns. The measurement was sensitive and accurate enough to detect small errors in the concentrator geometry, such as 1 millimeter in linear dimension and 0.1° in concentrator tilt angle. The measurement procedure is simple and can be easily adapted to a wide range of nonimaging optical systems.

scholarly journals UV Nanoimprint Lithography: Geometrical Impact on Filling Properties of Nanoscale Patterns

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 822
Author(s):  
Christine Thanner ◽  
Martin Eibelhuber
Keyword(s):  
Layer Thickness ◽  
Process Parameters ◽  
Nanoimprint Lithography ◽  
Failure Modes ◽  
Production Method ◽  
Efficient Production ◽  
Comprehensive Overview ◽  
Replication Method ◽  
Wide Range ◽  
Pattern Size

Ultraviolet (UV) Nanoimprint Lithography (NIL) is a replication method that is well known for its capability to address a wide range of pattern sizes and shapes. It has proven to be an efficient production method for patterning resist layers with features ranging from a few hundred micrometers and down to the nanometer range. Best results can be achieved if the fundamental behavior of the imprint resist and the pattern filling are considered by the equipment and process parameters. In particular, the material properties and pattern size and shape play a crucial role. For capillary force-driven filling behavior it is important to understand the influencing parameters and respective failure modes in order to optimize the processes for reliable full wafer manufacturing. In this work, the nanoimprint results obtained for different pattern geometries are compared with respect to pattern quality and residual layer thickness: The comprehensive overview of the relevant process parameters is helpful for setting up NIL processes for different nanostructures with minimum layer thickness.

scholarly journals Detection of foot contact in treadmill running with inertial and optical measurement systems

2021 ◽  
pp. 110419
Author(s):  
Jasper Reenalda ◽  
Marit A. Zandbergen ◽  
Jelle D. Harbers ◽  
Max R. Paquette ◽  
Clare E. Milner
Keyword(s):  
Optical Measurement ◽  
Treadmill Running ◽  
Measurement Systems

ECA Methodology for Fatigue Design of Risers and Flowlines

2007 ◽  
Author(s):  
C. H. Luk ◽  
T. J. Wang
Keyword(s):  
Fracture Mechanics ◽  
Design Method ◽  
Steel Catenary Riser ◽  
Fatigue Design ◽  
Wide Range ◽  
Fatigue And Fracture ◽  
Level 3 ◽  
Fatigue Loads ◽  
Vessel Motion ◽  
Level 2

Engineering Criticality Assessment (ECA) is a procedure based on fracture mechanics that may be used to supplement the traditional S-N approach and determine the flaw acceptance and inspection criteria in fatigue and fracture design of risers and flowlines. A number of design codes provide guidance for this procedure, e.g. BS-7910:2005 [1]. However, more investigations and example studies are still needed to address the design implications for riser and flowline applications. This paper provides a review of the existing ECA methodology, presents a fracture mechanics design method for a wide range of riser and flowline fatigue problems, and shows flaw size results from steel catenary riser (SCR) and flowline (FL) examples. The first example is a deepwater SCR subjected to fatigue loads due to vessel motion and riser VIV. The second example is a subsea flowline subjected to thermal fatigue loads. The effects of crack re-characterization and material plasticity on the Level-2 and Level-3 ECA results of the SCR and flowline examples are illustrated.

A Design Method for Thermosyphon Solar Domestic Hot Water Systems

1987 ◽  
Vol 109 (2) ◽  
pp. 150-155 ◽  
Author(s):  
M. P. Malkin ◽  
S. A. Klein ◽  
J. A. Duffie ◽  
A. B. Copsey
Keyword(s):  
Flow Rate ◽  
Design Method ◽  
Water Systems ◽  
Hot Water ◽  
Average Flow Rate ◽  
Domestic Hot Water ◽  
Average Flow ◽  
Solar Fraction ◽  
Wide Range ◽  
Flow Circuit

A modification to the f-Chart method has been developed to predict monthly and annual performance of thermosyphon solar domestic hot water systems. Stratification in the storage tank is accounted for through use of a modified collector loss coefficient. The varying flow rate throughout the day and year in a thermosyphon system is accounted for through use of a fixed monthly “equivalent average” flow rate. The “equivalent average” flow rate is that which balances the thermosyphon buoyancy driving force with the frictional losses in the flow circuit on a monthly average basis. Comparison between the annual solar fraction predited by the modified design method and TRNSYS simulations for a wide range of thermosyphon systems shows an RMS error of 2.6 percent.

Multivariate design and analysis of aircraft HEX under multiple working conditions within flight envelope

2021 ◽  
pp. 1-18
Author(s):  
Qihang Liu ◽  
G.Q. Xu ◽  
Jie Wen ◽  
Yanchen Fu ◽  
Laihe Zhuang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Working Conditions ◽  
Design Method ◽  
Structural Parameters ◽  
Optimal Structure ◽  
Clear Correlation ◽  
Pressure Drops ◽  
Design Variables ◽  
Wide Range ◽  
Common Weight

Abstract This paper presents a multi-condition design method for the aircraft heat exchanger (HEX), marking with light weight, compactness and wide range of working conditions. The quasi-traversal genetic algorithm (QT-GA) method is introduced to obtain the optimal values of five structural parameters including the height, the tube diameter, the tube pitch, and the tube rows. The QT-GA method solves the deficiency of the conventional GA in the convergence, and gives a clear correlation between design variables and outputs. Pressure drops, heat transfer and the weight of the HEX are combined in a single objective function of GA in the HEX design, thus the optimal structure of the HEX suitable for all the working conditions can be directly obtained. After optimization, the weight of the HEX is reduced to 2.250 kg, more than 20% lower than a common weight of around 3 kg. Based on the optimal structure, the off-design performance of the HEX is further analyzed. Results show that the extreme working conditions for the heat transfer and the pressure drops are not consistent. It proves the advance of the multi-condition design method over traditional single-condition design method. In general, the proposed QT-GA design method is an efficient way to solve the multi-condition problems related to the aircraft HEX or other energy systems.

Methods of temperature measurement in microwave heating technologies

2021 ◽  
pp. 20-28
Author(s):  
Boris A. Lapshinov
Keyword(s):  
Temperature Measurement ◽  
Microwave Heating ◽  
Microwave Radiation ◽  
Electromagnetic Fields ◽  
Optical Measurement ◽  
Measurement Methods ◽  
Heating Systems ◽  
Measurement Systems ◽  
Processed Material ◽  
Spectral Pyrometry

In industrial technological processes associated with the heating of the processed material by microwave radiation, it is necessary to measure the temperatures of objects. Methods for measuring temperatures in the fields of technology using microwave heating systems are considered. The main possibilities, disadvantages and limitations of the used contact and non-contact (optical) measurement methods are determined. The requirements for temperature measurement systems under conditions of exposure to strong electromagnetic fields are listed. The possibilities of the spectral pyrometry method are especially noted.

Application areas of the angle reflector

2021 ◽  
pp. 54-59
Author(s):  
L. R. Yurenkova ◽  
O. A. Yakovuk ◽  
I. V. Morozov
Keyword(s):  
Radio Wave ◽  
Outer Space ◽  
Road Transport ◽  
Optical Systems ◽  
Design Parameters ◽  
Design Activity ◽  
Primary Role ◽  
Beam Laser ◽  
Wide Range ◽  
Graphical Calculation

The article provides examples of how the device known as the «angle reflector» a few decades ago has been increasingly used in various fields of science and technology in recent years. Angle reflectors are designed to change (reflect) optical and radar rays in the direction, opposite to the original direction. At present, angle reflectors are widely used to ensure the safety of road transport on dangerous road sections. Radio wave reflectors have the same design as optical ones; therefore, in radio detection and location, angle reflectors are used to send warning signals to ship radars on bridge supports, beacons and buoys. Modern angle reflectors attached to meteorological probes allow determining the direction and speed of the wind at high altitude, which is especially important in the study of the outer space. In recent years, devices have been developed to improve the accuracy of radar stations calibration. The examples of graphical calculation of angle reflectors presented in the article clearly demonstrate the primary role of geometry in the design activity of an engineer. The graphical calculation is based on the theoretical positions of projective geometry. The design and calculation of optical systems is carried out by the graphoanalytic method, since only with a combination of graphical and analytical methods it is possible to accurately calculate the course of a light beam, laser, or radio wave and thereby determine the design parameters of the devices. The article focuses on a graphical method for calculating two types of angle reflectors using orthogonal projection, due to which modern engineers will be able to create more up-to-date designs of optical systems with a wide range of applications.

Sign in / Sign up

Export Citation Format

Share Document