scholarly journals Electrical energy generation in a double-compartment microbial fuel cell using Shewanella spp. strains isolated from Odontesthes regia

2020 ◽  
Vol 30 (1) ◽  
Author(s):  
Sandy L. Calderon ◽  
Pilar García Avelino ◽  
Angélica María Baena-Moncada ◽  
Ana Lucía Paredes-Doig ◽  
Adolfo La Rosa-Toro
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Coulombic Efficiency ◽  
Average Power ◽  
Electrical Energy ◽  
Energy Generation ◽  
Anaerobic Conditions ◽  
Biofilm Growth ◽  
Electrical Energy Generation ◽  
Double Compartment

AbstractThis study is focused on electrical energy generation in a double-compartment microbial fuel cell. Carbon felt impregnated with multi-walled carbon nanotubes was used as an anode, which contained gold nanoparticles and Shewanella spp. grown under aerobic conditions was used as a biocatalyst. The electrodes, used before and after biofilm growth, were characterized by scanning electron microscopy and cyclic voltammetry. The results revealed the formation of Shewanella spp. colonies on the electrode surface and electrochemical activity under aerobic and anaerobic conditions. During biofilm growth in Luria Bertani medium, a stabilized average power density of 281 mW m− 2 was recorded. Subsequently, the cell reached a maximum current density of 0.11 mA cm− 2 after 72 h of operation and a coulombic efficiency of 65% under anaerobic conditions.

scholarly journals Electrical energy production from plant biomass: an analysis model development for Pandanus Amaryllifolius plant microbial fuel cell

2020 ◽  
Vol 18 (3) ◽  
pp. 1163
Author(s):  
Teng Howe Cheng ◽  
Kok Boon Ching ◽  
Chessda Uttraphan ◽  
Yee Mei Heong
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Plant Biomass ◽  
Coulombic Efficiency ◽  
Functional Model ◽  
Electrical Energy ◽  
Microbial Culture ◽  
Analysis Model ◽  
Plant Microbial Fuel Cell ◽  
Pandanus Amaryllifolius

Plant microbial fuel cell (P-MFC) is an electrochemical reactor that converts organic compounds to electrical energy through the catalytic reaction from electrochemically active bacteria (EAB). However, there is no sign of an attempt in developing the functional model in predicting the energy conversion and utilization of P-MFC. In this study, an analytic model is proposed to show the whole production process of the organic compound to electrical energy generation. <em>Pandanus Amaryllifolius</em> plant was used as sources of photosynthate, where biomass product from rhizodeposition, acetate was produced, and soil bacteria as the microbial culture, and air as the input to the cathode chamber. The proposed analytical model is able to predict the output of the P-MFC using the parameters from the experiment. The generated data from the model was then compared with the monitored data from the <em>Pandanus Amaryllifolius </em>P-MFC. The results show the electrical power output has a high similarity pattern with the bacterial growth curve model and able to achieve the coulombic efficiency of 95.32%.

Application of ion exchange membranes in enhancing algal production alongside desalination of saline water in microbial fuel cell

MRS Advances ◽  
2019 ◽  
Vol 4 (19) ◽  
pp. 1077-1085 ◽  
Author(s):  
B. Neethu ◽  
H. Pradhan ◽  
Pankaj Sarkar ◽  
M. M. Ghangrekar
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Saline Water ◽  
Coulombic Efficiency ◽  
Algal Growth ◽  
Oxygen Demand ◽  
Electrical Energy ◽  
Clean Energy ◽  
Algal Production ◽  
Desalination Chamber

AbstractIn the present world scenario the demand for fresh water and clean energy is driving the need to convert a microbial fuel cell (MFC) into an algal-based microbial desalination cell (MDC) that can support algal growth along with desalination of saline water. In this study, the performance of a five-chambered MDC fed with saline water having two different salt concentrations, namely 2.5 g/L and 5.0 g/L in desalination chamber, as well as MDC operated without algae in catholyte was investigated. The algal-based MDC operated with 5 g/L of total dissolved solid (TDS) in desalination chamber exhibited the best performance results among all other combinations giving a maximum power density of 45.52 mW/m2 and a desalination efficiency of 71 ± 2 %. Also, a chemical oxygen demand (COD) removal efficiency of 78 % and coulombic efficiency of 12.24 % was achieved with 5 g/L NaCl concentration in desalination chamber. Based on this experimental performance evaluation, it can be inferred that algal-based MDC can provide a promising and sustainable approach for wastewater treatment with the capability of simultaneous desalination, algal production and electrical energy recovery.

scholarly journals New fragmented electro-active biofilm (FAB) reactor to increase anode surface area and performance of microbial fuel cell

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Tesfalem Atnafu ◽  
Seyoum Leta
Keyword(s):  
Fuel Cell ◽  
Surface Area ◽  
Microbial Fuel Cell ◽  
Coulombic Efficiency ◽  
Synergetic Effect ◽  
Cod Removal ◽  
Anode Surface ◽  
Biofilm Growth ◽  
Bench Scale ◽  
Lower Voltage

Abstract Background Microbial fuel cell (MFC) technology is a promising sustainable future energy source with a renewable and abundant substrate. MFC critical drawbacks are anode surface area limitations and electrochemical loss. Recent studies recommend thick anode biofilm growth due to the synergetic effect between microbial communities. Engineering the anode surface area is the prospect of MFC. In this study, a microbial electrode jacket dish (MEJ-dish) was invented, first time to the authors’ knowledge, to support MFC anode biofilm growth. The MFC reactor with MEJ-dish was hypothesized to develop a variable biofilm thickens. This reactor is called a fragmented electro-active biofilm-microbial fuel cell (FAB-MFC). It was optimized for pH and MEJ-dish types and tested at a bench-scale. Results Fragmented (thick and thin) anode biofilms were observed in FAB-MFC but not in MFC. During the first five days and pH 7.5, maximum voltage (0.87 V) was recorded in MFC than FAB-MFC; however, when the age of the reactor increases, all the FAB-MFC gains momentum. It depends on the MEJ-dish type that determines the junction nature between the anode and MEJ-dish. At alkaline pH 8.5, the FAB-MFC generates a lower voltage relative to MFC. On the contrary, the COD removal was improved regardless of pH variation (6.5–8.5) and MEJ-dish type. The bench-scale studies support the optimization findings. Overall, the FAB improves the Coulombic efficiency by 7.4–9.6 % relative to MFC. It might be recommendable to use both FAB and non-FAB in a single MFC reactor to address the contradictory effect of increasing COD removal associated with the lower voltage at higher pH. Conclusions This study showed the overall voltage generated was significantly higher in FAB-MFC than MFC within limited pH (6.5–7.5); relatively, COD removal was enhanced within a broader pH range (6.5–8.5). It supports the conclusion that FAB anode biofilms were vital for COD removal, and there might be a mutualism even though not participated in voltage generation. FAB could provide a new flexible technique to manage the anode surface area and biofilm thickness by adjusting the MEJ-dish size. Future studies may need to consider the number, size, and conductor MEJ-dish per electrode.

Electrical Energy Generation via Reversible Chemical Doping on Carbon Nanotube Fibers

2016 ◽  
Vol 28 (44) ◽  
pp. 9752-9757 ◽  
Author(s):  
Albert Tianxiang Liu ◽  
Yuichiro Kunai ◽  
Pingwei Liu ◽  
Amir Kaplan ◽  
Anton L. Cottrill ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Electrical Energy ◽  
Energy Generation ◽  
Chemical Doping ◽  
Carbon Nanotube Fibers ◽  
Electrical Energy Generation

Effect of Different Mediators on Bio-Energy Generation and Palm Oil Mill Effluent Treatment in an Air-Cathode Microbial Fuel Cell-Adsorption System

2021 ◽  
Vol 411 ◽  
pp. 67-78
Author(s):  
Ivy Ai Wei Tan ◽  
J.R. Selvanathan ◽  
M.O. Abdullah ◽  
N. Abdul Wahab ◽  
D. Kanakaraju
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Palm Oil ◽  
Oxygen Demand ◽  
Energy Generation ◽  
Effluent Treatment ◽  
Palm Oil Mill Effluent ◽  
Adsorption System ◽  
Air Cathode ◽  
Palm Oil Mill

Palm oil mill effluent (POME) discharged without treatment into watercourses can pollute the water source. Microbial fuel cell (MFC) has gained high attention as a green technology of converting organic wastewater into bio-energy. As an approach to overcome the limitations of the existing POME treatment methods, air-cathode MFC-Adsorption system is introduced as an innovative technology to treat POME and generate bio-electricity simultaneously. However, the use of conventional MFC with proton exchange membrane in large scale applications is restricted by the high cost and low power generation. Addition of mediator in MFC is essential in order to increase the electron transfer efficiency, hence enhancing the system performance. This study therefore aims to investigate the effect of different type of mediators i.e. congo red (CR), crystal violet (CV) and methylene blue (MB) on the performance of an affordable air-cathode MFC-Adsorption system made from earthen pot with POME as the substrate. The addition of different mediators altered the pH of the MFC-Adsorption system, in which more alkaline system showed better performance. The voltage generated in the system with CR, CV and MB mediator was 120.58 mV, 168.63 mV and 189.25 mV whereas the current generated was 2.41 mA, 3.37 mA and 3.79 mA, respectively. The power density of 290.79 mW/m3, 568.72 mW/m3 and 716.31 mW/m3 was produced in the MFC-Adsorption system with CR, CV and MB mediator, respectively. The highest POME treatment efficiency was achieved in MFC-Adsorption system with MB mediator, which resulted in biochemical oxygen demand, chemical oxygen demand, total suspended solids, turbidity and ammoniacal nitrogen removal of 75.3%, 84.8%, 91.5%, 86.1% and 23.31%, respectively. Overall, the air-cathode MFC-Adsorption system with addition of MB mediator was feasible for POME treatment and simultaneous bio-energy generation.

scholarly journals Practical Maximum-Power Extraction in Single Microbial Fuel Cell by Effective Delivery through Power Management System

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2312
Author(s):  
Jeongjin Yeo ◽  
Taeyoung Kim ◽  
Jae Jang ◽  
Yoonseok Yang
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Management ◽  
Operation Time ◽  
Electrical Energy ◽  
Maximum Power ◽  
Extraction Technology ◽  
Power Extraction ◽  
Point Tracking ◽  
Power Point

Power management systems (PMSs) are essential for the practical use of microbial fuel cell (MFC) technology, as they replace the unstable stacking of MFCs with step-up voltage conversion. Maximum-power extraction technology could improve the power output of MFCs; however, owing to the power consumption of the PMS operation, the maximum-power extraction point cannot deliver maximum power to the application load. This study proposes a practical power extraction for single MFCs, which reserves more electrical energy for an application load than conventional maximum power-point tracking (MPPT). When experimentally validated on a real MFC, the proposed method delivered higher output power during a longer PMS operation time than MPPT. The maximum power delivery enables more effective power conditioning of various micro-energy harvesting systems.

EXPERIMENTAL STUDY OF BIOELECTRICITY-MICROBIAL FUEL CELL FOR ELECTRICITY GENERATION: PERFORMANCE CHARACTERIZATION AND CAPACITY IMPROVEMENT

2017 ◽  
Vol 79 (5-2) ◽  
Author(s):  
Zul Hasrizal Bohari ◽  
Nur Asyhikin Azhari ◽  
Nuraina Nasuha Ab Rahman ◽  
Mohamad Faizal Baharom ◽  
Mohd Hafiz Jali ◽  
...  
Keyword(s):  
Organic Matter ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Electrical Power ◽  
Electrical Energy ◽  
Sewage Water ◽  
Electricity Production ◽  
Sample Type ◽  
Series Of Experiments ◽  
The Right

Energy trending lately shown the need of new possible renewable energy. This paper studies about the capability and capacity generating of electricity by using Bio-electricity-Microbial Fuel Cell (Bio-MFC). Bio-MFC is the device that converts chemical energy to electrical energy by using microbes that exist in the sewage water. The energy contained in organic matter can be converted into useful electrical power. MFC can be operated by microbes that transfer electrons from anode to cathode for generating electricity. There are two major goals in this study. The first goal is to determine the performance characteristics of MFCs in this application. Specifically we investigate the relationship between the percentages of organic matter in a sample results in higher electricity production of MFCs power by that sample. As a result, the sewage (wastewater) chosen in the second series experiment because the sewage (wastewater) also produced the highest percentage of organic matter which is around 10%. Due to these, the higher percentage of organic matter corresponds to higher electricity production. The second goal is to determine the condition under which MFC work most efficiently to generating electricity. After get the best result of the combination for the electrode, which is combination of zinc and copper (900mV),the third series of experiments was coducted, that show the independent variable was in the ambient temperature. The reasons of these observations will be explained throughout the paper. The study proved that the electricity production of MFC can be increased by selecting the right condition of sample type, temperature and type of electrode. 

Sign in / Sign up

Export Citation Format

Share Document