A comparison of phase inversion and traveltime tomography for processing near-surface refraction traveltimes

Geophysics ◽  
2009 ◽  
Vol 74 (6) ◽  
pp. WCB11-WCB24 ◽  
Author(s):  
Karl J. Ellefsen

With phase inversion, one can estimate subsurface velocities using the phases of first-arriving waves, which are the frequency-domain equivalents of the traveltimes. Phase inversion is modified to make it suitable for processing traveltimes from near-surface refraction surveys. The modifications include parameterizing the model, correcting the observed phases, and selecting the complex frequency. This modified phase inversion is compared to traveltime tomography. For two comparisons using computer-simulated traveltimes, the difference between the estimated and correct models, the residual mean, and the residual standard deviation are smaller for the phase inversion than they are for the traveltime tomography. For a comparison using field data from an S-wave refraction survey, both methods estimate models that are consistent with the known geology. Nonetheless, the phase-inversion model includes small-scale features in the bedrock that are geologically plausible; the residual mean and the residual standard deviation are smaller for the phase inversion than they are for the traveltime tomography.

2020 ◽  
Author(s):  
Brady A. Flinchum ◽  
Eddie Banks ◽  
Michael Hatch ◽  
Okke Batelaan ◽  
Luk Peeters ◽  
...  

Abstract. Identifying and quantifying recharge processes linked to ephemeral surface water features is challenging due to their episodic nature. We use a unique combination of well-established near-surface geophysical methods to provide evidence of a surface and groundwater connection under a small ephemeral recharge feature in a flat, semi-arid region near Adelaide, Australia. We use a seismic survey to obtain P-wave velocity through travel-time tomography and S-wave velocity through the multichannel analysis of surface waves. The ratios between P-wave and S-wave velocities allow us to infer the position of the water table. A separate survey was used to obtain electrical conductivity measurements from time-domain electromagnetics and water contents were acquired by downhole nuclear magnetic resonance. The combined geophysical observations provide evidence to support a groundwater mound underneath a subtle ephemeral feature. Our results suggest that recharge is localized and that small-scale ephemeral features play an important role in groundwater recharge. Furthermore, we show that a combined geophysical approach can provide a unique perspective that helps shape the hydrogeological conceptualization of a semi-arid region.


Geophysics ◽  
2007 ◽  
Vol 72 (3) ◽  
pp. J1-J6 ◽  
Author(s):  
Sherif M. Hanafy ◽  
Gerard T. Schuster

An interferometric form of Fermat’s principle and traveltime tomography is used to invert ground-penetrating radar (GPR) data for the subsurface velocity distribution. The input data consist of GPR traveltimes of reflections from two buried interfaces, [Formula: see text] (reference) and [Formula: see text] (target), where the data are excited and recorded by GPR antennas at the surface. Fermat’s interferometric principle is then used to redatum the surface transmitters and receivers to interface [Formula: see text] so the associated reflection traveltimes correspond to localized transit times between interfaces [Formula: see text] and [Formula: see text]. The overburden velocity model above interface [Formula: see text] is not required. The result after tomographic inversion is a high-resolution estimate of the velocity between interfaces [Formula: see text] and [Formula: see text] that does not depend on the velocity model above interface [Formula: see text]. A motivation for introducing interferometric traveltime tomography is that typical layer-stripping approaches will see the slowness error increase with depth as the layers are inverted. This suggests that near-surface statics errors are propagated and amplified with depth. In contrast, the interferometric traveltime tomography method largely eliminates statics errors by taking the difference between reflection events that emanate from neighboring layer interfaces. Slowness errors are not amplified with depth. However, the method is sensitive to the estimation accuracy for the geometry of the reference interface. Both synthetic and real field data are used successfully to validate the effectiveness of this interferometric technique.


2021 ◽  
Vol 9 (6) ◽  
pp. 585
Author(s):  
Minghao Wu ◽  
Leen De Vos ◽  
Carlos Emilio Arboleda Chavez ◽  
Vasiliki Stratigaki ◽  
Maximilian Streicher ◽  
...  

The present work introduces an analysis of the measurement and model effects that exist in monopile scour protection experiments with repeated small scale tests. The damage erosion is calculated using the three dimensional global damage number S3D and subarea damage number S3D,i. Results show that the standard deviation of the global damage number σ(S3D)=0.257 and is approximately 20% of the mean S3D, and the standard deviation of the subarea damage number σ(S3D,i)=0.42 which can be up to 33% of the mean S3D. The irreproducible maximum wave height, chaotic flow field and non-repeatable armour layer construction are regarded as the main reasons for the occurrence of strong model effects. The measurement effects are limited to σ(S3D)=0.039 and σ(S3D,i)=0.083, which are minor compared to the model effects.


Symmetry ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 502 ◽  
Author(s):  
Jong-Hyun Kim ◽  
Wook Kim ◽  
Young Kim ◽  
Jung Lee

When we perform particle-based water simulation, water particles are often increased dramatically because of particle splitting around breaking holes to maintain the thin fluid sheets. Because most of the existing approaches do not consider the volume of the water particles, the water particles must have a very low mass to satisfy the law of the conservation of mass. This phenomenon smears the motion of the water, which would otherwise result in splashing, thereby resulting in artifacts such as numerical dissipation. Thus, we propose a new fluid-implicit, particle-based framework for maintaining and representing the thin sheets and turbulent flows of water. After splitting the water particles, the proposed method uses the ghost density and ghost mass to redistribute the difference in mass based on the volume of the water particles. Next, small-scale turbulent flows are formed in local regions and transferred in a smooth manner to the global flow field. Our results show us the turbulence details as well as the thin sheets of water, thereby obtaining an aesthetically pleasing improvement compared with existing methods.


2015 ◽  
Vol 8 (2) ◽  
pp. 941-963 ◽  
Author(s):  
T. Vlemmix ◽  
F. Hendrick ◽  
G. Pinardi ◽  
I. De Smedt ◽  
C. Fayt ◽  
...  

Abstract. A 4-year data set of MAX-DOAS observations in the Beijing area (2008–2012) is analysed with a focus on NO2, HCHO and aerosols. Two very different retrieval methods are applied. Method A describes the tropospheric profile with 13 layers and makes use of the optimal estimation method. Method B uses 2–4 parameters to describe the tropospheric profile and an inversion based on a least-squares fit. For each constituent (NO2, HCHO and aerosols) the retrieval outcomes are compared in terms of tropospheric column densities, surface concentrations and "characteristic profile heights" (i.e. the height below which 75% of the vertically integrated tropospheric column density resides). We find best agreement between the two methods for tropospheric NO2 column densities, with a standard deviation of relative differences below 10%, a correlation of 0.99 and a linear regression with a slope of 1.03. For tropospheric HCHO column densities we find a similar slope, but also a systematic bias of almost 10% which is likely related to differences in profile height. Aerosol optical depths (AODs) retrieved with method B are 20% high compared to method A. They are more in agreement with AERONET measurements, which are on average only 5% lower, however with considerable relative differences (standard deviation ~ 25%). With respect to near-surface volume mixing ratios and aerosol extinction we find considerably larger relative differences: 10 ± 30, −23 ± 28 and −8 ± 33% for aerosols, HCHO and NO2 respectively. The frequency distributions of these near-surface concentrations show however a quite good agreement, and this indicates that near-surface concentrations derived from MAX-DOAS are certainly useful in a climatological sense. A major difference between the two methods is the dynamic range of retrieved characteristic profile heights which is larger for method B than for method A. This effect is most pronounced for HCHO, where retrieved profile shapes with method A are very close to the a priori, and moderate for NO2 and aerosol extinction which on average show quite good agreement for characteristic profile heights below 1.5 km. One of the main advantages of method A is the stability, even under suboptimal conditions (e.g. in the presence of clouds). Method B is generally more unstable and this explains probably a substantial part of the quite large relative differences between the two methods. However, despite a relatively low precision for individual profile retrievals it appears as if seasonally averaged profile heights retrieved with method B are less biased towards a priori assumptions than those retrieved with method A. This gives confidence in the result obtained with method B, namely that aerosol extinction profiles tend on average to be higher than NO2 profiles in spring and summer, whereas they seem on average to be of the same height in winter, a result which is especially relevant in relation to the validation of satellite retrievals.


1981 ◽  
Vol 33 (3) ◽  
pp. 319-324 ◽  
Author(s):  
A. J. Kempster ◽  
J. P. Chadwick ◽  
D. W. Jones ◽  
A. Cuthbertson

ABSTRACTThe Hennessy and Chong Fat Depth Indicator and the Ulster Probe automatic recording instruments developed for measuring fat thickness were tested against the optical probe for use in pig carcass classification and grading.Fat thickness measurements were taken using each probe 60 mm from the dorsal mid-line over the m. longissimus at the positions of the 3rd/4th lumbar vertebrae, 3rd/4th last ribs and last rib on a total of 110 hot carcasses covering the range of market weights in Great Britain. The standard deviation of carcass lean proportion at equal carcass weight was 35·4 g/kg.The instruments differed little in the precision of carcass lean proportion prediction: residual standard deviation (g/kg) for the multiple regression with carcass weight and the best individual fat measurement for each probe were: last rib optical probe, 22·1; last rib Ulster Probe, 22·7; and 3rd/4th last rib Fat Depth Indicator, 21/6. Residual standard deviation (g/kg) for carcass lean proportion prediction from carcass weight and all three fat measurements in multiple regression were 21·3 optical probe, 21·3 Ulster Probe and 201 Fat Depth Indicator.Similar mean fat measurements were obtained from the optical probe and Fat Depth Indicator, and for these instruments, but to a lesser extent for the Ulster Probe, the regression relationships with each other and with fat thickness measurements taken on the cut surface of the cold carcass were also similar.The differences recorded in precision are unlikely to be sufficiently important to influence the choice of one probe rather than another.


2013 ◽  
Vol 664 ◽  
pp. 94-98
Author(s):  
Guang De Zhang

Following deepened exploration and development in Shengli exploration area, seismic data requirements are also getting higher and higher. However, in recent years the difference of Xiaoqing river on both sides have made us know that the importance of this problem. In view of the above, this task is aimed at quaternary shallow of old river course within Xiaoqing River. Our analysis of lithology and sedimentary characteristics are using static cone penetration test and rock core exploration method, and we want to reappear near surface deposition of old river course within Xiaoqing River. The research is close combined with the exploration demand and theoretical study, so it has important theoretical and practical significance.


Sign in / Sign up

Export Citation Format

Share Document