Wavelet-crosscorrelation-based interferometric redatuming in 4D seismic

Geophysics ◽  
2018 ◽  
Vol 83 (4) ◽  
pp. Q37-Q47 ◽  
Author(s):  
Yang Zhao ◽  
Weichang Li
Keyword(s):  
Time Lapse ◽  
Surface Source ◽  
Near Surface ◽  
Ground Roll ◽  
Time Offset ◽  
4D Seismic ◽  
Shallow Structure ◽  
Phase Spectra ◽  
Scattering Noise

Interferometric virtual source (VS) redatuming crosscorrelates downgoing waves with the corresponding upgoing waves to convert records from surface-source gathers to virtual gathers at the buried receiver locations. The assumption is that the VS records show the reduced effects of overburden complexity and therefore provide improved seismic repeatability and image quality. In practice, however, the repeatability and quality of the redatumed data can be degraded by one-sided illumination and inadequate preprocessing. In the presence of complex near-surface structure for land redatuming, the intricate shallow structure and highly variable weathering layers introduce surface multiples, ground-roll/scattering noise, and interference among different wave modes that additionally contaminates the down- and upgoing wavefields. To address these issues, we have developed a new interferometric redatuming method based on crosscorrelation in the wavelet domain. Specifically, by transforming time-offset data into the local time-scale (TS) and local TS-wavenumber domains, we have designed and applied filters on the amplitude of the cross spectra in each domain to suppress the aforementioned artifacts and noise, while maintaining accurate kinematic information by retaining the original phase spectra. The new procedure involves forward wavelet transform of the source records, crosscorrelating the wavelet coefficients, filtering in the corresponding domains, and then inverse wavelet transformation to produce the VS records. Components associated with scattering noise and ground roll can be effectively suppressed because our designed filters tackle their features accurately in the local TS and local TS-wavenumber domains, respectively. We tested the method on data from 13 time-lapse surveys that included a significant repeatability problem across a 17-month survey gap, and we compared the results with results from the conventional VS methods. Our VS method produced the best improvement in imaging and repeatability, a positive step forward for land seismic monitoring.

scholarly journals Time-lapse difference static correction using prestack crosscorrelations: 4D seismic image enhancement case from Ketzin

Geophysics ◽  
2014 ◽  
Vol 79 (6) ◽  
pp. B243-B252 ◽  
Author(s):  
Peter Bergmann ◽  
Artem Kashubin ◽  
Monika Ivandic ◽  
Stefan Lüth ◽  
Christopher Juhlin
Keyword(s):  
Seismic Data ◽  
Time Lapse ◽  
Data Sets ◽  
Storage Site ◽  
Data Set ◽  
Near Surface ◽  
Static Correction ◽  
Seismic Image ◽  
Static Corrections ◽  
4D Seismic

A method for static correction of time-lapse differences in reflection arrival times of time-lapse prestack seismic data is presented. These arrival-time differences are typically caused by changes in the near-surface velocities between the acquisitions and had a detrimental impact on time-lapse seismic imaging. Trace-to-trace time shifts of the data sets from different vintages are determined by crosscorrelations. The time shifts are decomposed in a surface-consistent manner, which yields static corrections that tie the repeat data to the baseline data. Hence, this approach implies that new refraction static corrections for the repeat data sets are unnecessary. The approach is demonstrated on a 4D seismic data set from the Ketzin [Formula: see text] pilot storage site, Germany, and is compared with the result of an initial processing that was based on separate refraction static corrections. It is shown that the time-lapse difference static correction approach reduces 4D noise more effectively than separate refraction static corrections and is significantly less labor intensive.

Multiwell 3D distributed acoustic sensing vertical seismic profile imaging with engineered fibers: CO2CRC Otway Project case study

Geophysics ◽  
2021 ◽  
Vol 86 (6) ◽  
pp. D241-D248 ◽  
Author(s):  
Alexey Yurikov ◽  
Konstantin Tertyshnikov ◽  
Roman Isaenkov ◽  
Evgenii Sidenko ◽  
Sinem Yavuz ◽  
...  
Keyword(s):  
Low Cost ◽  
Optimal Solution ◽  
Time Lapse ◽  
Local Area ◽  
Seismic Profile ◽  
Enhanced Backscattering ◽  
Seismic Acquisition ◽  
Vsp Data ◽  
4D Seismic

The 4D surface seismic monitoring is a standard method for reservoir surveillance during the production of hydrocarbons or CO2 injection. However, land 4D seismic acquisition campaigns are often associated with high cost and disruptions to industrial operation or agricultural activities in the area of acquisition. An alternative technique for time-lapse monitoring of the subsurface is the 3D vertical seismic profiling (VSP), which becomes particularly attractive when used with distributed acoustic fiber-optic sensors (DAS) installed in wells. The advantages of 3D DAS VSP include its relatively low cost, minimal footprint on the local area during acquisition, and superior spatial resolution compared to the resolution of geophones. The potential of this technique is explored by processing and analyzing multiwell 3D DAS VSP data acquired at the CO2CRC Otway Project site in Victoria, Australia. The DAS data were recorded using an engineered fiber with enhanced backscattering cemented behind the casing of five wells. The data from each well are processed individually using the same processing flow and then migrated using a 3D migration code tailored to DAS data. Having DAS along the full extent of multiple wells ensures adequate seismic coverage of the area of CO2 injection. The migrated images provide detailed information about the subsurface up to 700 m away from a well and up to 2 km depth. The images are consistent with previously acquired geophone VSP and surface seismic data. The quality of the 3D DAS VSP imaging is comparable or superior to the quality of conventional imaging using geophone data. Therefore, 3D DAS VSP is a demonstrably optimal solution for reservoir monitoring.

Experience of using time-lapse microscopy in IVF and ICSI programs

2020 ◽  
pp. 47-50
Author(s):  
N. V. Saraeva ◽  
N. V. Spiridonova ◽  
M. T. Tugushev ◽  
O. V. Shurygina ◽  
A. I. Sinitsyna
Keyword(s):  
Pregnancy Rate ◽  
Embryo Transfer ◽  
Selection Procedure ◽  
Time Lapse ◽  
Single Embryo Transfer ◽  
Main Group ◽  
Clinical Pregnancy ◽  
Control Group ◽  
Time Lapse Microscopy

In order to increase the pregnancy rate in the assisted reproductive technology, the selection of one embryo with the highest implantation potential it is very important. Time-lapse microscopy (TLM) is a tool for selecting quality embryos for transfer. This study aimed to assess the benefits of single-embryo transfer of autologous oocytes performed on day 5 of embryo incubation in a TLM-equipped system in IVF and ICSI programs. Single-embryo transfer following incubation in a TLM-equipped incubator was performed in 282 patients, who formed the main group; the control group consisted of 461 patients undergoing single-embryo transfer following a traditional culture and embryo selection procedure. We assessed the quality of transferred embryos, the rates of clinical pregnancy and delivery. The groups did not differ in the ratio of IVF and ICSI cycles, average age, and infertility factor. The proportion of excellent quality embryos for transfer was 77.0% in the main group and 65.1% in the control group (p = 0.001). In the subgroup with receiving eight and less oocytes we noted the tendency of receiving more quality embryos in the main group (р = 0.052). In the subgroup of nine and more oocytes the quality of the transferred embryos did not differ between two groups. The clinical pregnancy rate was 60.2% in the main group and 52.9% in the control group (p = 0.057). The delivery rate was 45.0% in the main group and 39.9% in the control group (p > 0.050).

scholarly journals Near-surface real-time seismic imaging using parsimonious interferometry

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sherif M. Hanafy ◽  
Hussein Hoteit ◽  
Jing Li ◽  
Gerard T. Schuster
Keyword(s):  
Fluid Flow ◽  
Real Time ◽  
Temporal Resolution ◽  
Seismic Imaging ◽  
Time Lapse ◽  
Rock Properties ◽  
Recording Time ◽  
Near Surface ◽  
Arrival Times ◽  
Order Of Magnitude

AbstractResults are presented for real-time seismic imaging of subsurface fluid flow by parsimonious refraction and surface-wave interferometry. Each subsurface velocity image inverted from time-lapse seismic data only requires several minutes of recording time, which is less than the time-scale of the fluid-induced changes in the rock properties. In this sense this is real-time imaging. The images are P-velocity tomograms inverted from the first-arrival times and the S-velocity tomograms inverted from dispersion curves. Compared to conventional seismic imaging, parsimonious interferometry reduces the recording time and increases the temporal resolution of time-lapse seismic images by more than an order-of-magnitude. In our seismic experiment, we recorded 90 sparse data sets over 4.5 h while injecting 12-tons of water into a sand dune. Results show that the percolation of water is mostly along layered boundaries down to a depth of a few meters, which is consistent with our 3D computational fluid flow simulations and laboratory experiments. The significance of parsimonious interferometry is that it provides more than an order-of-magnitude increase of temporal resolution in time-lapse seismic imaging. We believe that real-time seismic imaging will have important applications for non-destructive characterization in environmental, biomedical, and subsurface imaging.

scholarly journals Evaluation of HRCLDAS and ERA5 Datasets for Near-Surface Wind over Hainan Island and South China Sea

Atmosphere ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 766
Author(s):  
Yi Jiang ◽  
Shuai Han ◽  
Chunxiang Shi ◽  
Tao Gao ◽  
Honghui Zhen ◽  
...  
Keyword(s):  
South China Sea ◽  
South China ◽  
Surface Wind ◽  
Hainan Island ◽  
The South China Sea ◽  
Wind Data ◽  
The South ◽  
Near Surface ◽  
China Sea

Near-surface wind data are particularly important for Hainan Island and the South China Sea, and there is a wide range of wind data sources. A detailed understanding of the reliability of these datasets can help us to carry out related research. In this study, the hourly near-surface wind data from the High-Resolution China Meteorological Administration (CMA) Land Data Assimilation System (HRCLDAS) and the fifth-generation ECMWF atmospheric reanalysis data (ERA5) were evaluated by comparison with the ground automatic meteorological observation data for Hainan Island and the South China Sea. The results are as follows: (1) the HRCLDAS and ERA5 near-surface wind data trend was basically the same as the observation data trend, but there was a smaller bias, smaller root-mean-square errors, and higher correlation coefficients between the near-surface wind data from HRCLDAS and the observations; (2) the quality of HRCLDAS and ERA5 near-surface wind data was better over the islands of the South China Sea than over Hainan Island land. However, over the coastal areas of Hainan Island and island stations near Sansha, the quality of the HRCLDAS near-surface wind data was better than that of ERA5; (3) the quality of HRCLDAS near-surface wind data was better than that of ERA5 over different types of landforms. The deviation of ERA5 and HRCLDAS wind speed was the largest along the coast, and the quality of the ERA5 wind direction data was poorest over the mountains, whereas that of HRCLDAS was poorest over hilly areas; (4) the accuracy of HRCLDAS at all wind levels was higher than that of ERA5. ERA5 significantly overestimated low-grade winds and underestimated high-grade winds. The accuracy of HRCLDAS wind ratings over the islands of the South China Sea was significantly higher than that over Hainan Island land, especially for the higher wind ratings; and (5) in the typhoon process, the simulation of wind by HRCLDAS was closer to the observations, and its simulation of higher wind speeds was more accurate than the ERA5 simulations.

scholarly journals Time-lapse imaging of CO2 migration within near-surface sediments during a controlled sub-seabed release experiment

2021 ◽  
Vol 109 ◽  
pp. 103363
Author(s):  
Ben Roche ◽  
Jonathan M. Bull ◽  
Hector Marin-Moreno ◽  
Timothy G. Leighton ◽  
Ismael H. Falcon-Suarez ◽  
...  
Keyword(s):  
Surface Sediments ◽  
Time Lapse ◽  
Near Surface ◽  
Release Experiment ◽  
Time Lapse Imaging

DISPERSION IN SEISMIC SURFACE WAVES

Geophysics ◽  
1951 ◽  
Vol 16 (1) ◽  
pp. 63-80 ◽  
Author(s):  
Milton B. Dobrin
Keyword(s):  
Surface Waves ◽  
Water Waves ◽  
Seismic Refraction ◽  
Wave Theory ◽  
Wave Dispersion ◽  
Surface Zone ◽  
Surface Wave Dispersion ◽  
Near Surface ◽  
Arrival Times ◽  
Ground Roll

A non‐mathematical summary is presented of the published theories and observations on dispersion, i.e., variation of velocity with frequency, in surface waves from earthquakes and in waterborne waves from shallow‐water explosions. Two further instances are cited in which dispersion theory has been used in analyzing seismic data. In the seismic refraction survey of Bikini Atoll, information on the first 400 feet of sediments below the lagoon bottom could not be obtained from ground wave first arrival times because shot‐detector distances were too great. Dispersion in the water waves, however, gave data on speed variations in the bottom sediments which made possible inferences on the recent geological history of the atoll. Recent systematic observations on ground roll from explosions in shot holes have shown dispersion in the surface waves which is similar in many ways to that observed in Rayleigh waves from distant earthquakes. Classical wave theory attributes Rayleigh wave dispersion to the modification of the waves by a surface layer. In the case of earthquakes, this layer is the earth’s crust. In the case of waves from shot‐holes, it is the low‐speed weathered zone. A comparison of observed ground roll dispersion with theory shows qualitative agreement, but it brings out discrepancies attributable to the fact that neither the theory for liquids nor for conventional solids applies exactly to unconsolidated near‐surface rocks. Additional experimental and theoretical study of this type of surface wave dispersion may provide useful information on the properties of the surface zone and add to our knowledge of the mechanism by which ground roll is generated in seismic shooting.

4D-Quantification of alpine permafrost degradation in a bedrock ridge using multiple inversion schemes and deformation measurements

2021 ◽  
Author(s):  
Maike Offer ◽  
Riccardo Scandroglio ◽  
Daniel Draebing ◽  
Michael Krautblatter
Keyword(s):  
Climate Change ◽  
Mechanical Stability ◽  
Regularization Parameter ◽  
Time Lapse ◽  
Permafrost Degradation ◽  
Thermal Dynamics ◽  
Near Surface ◽  
Data Error ◽  
Near Surface Geophysics ◽  
Thawing Rate

<p>Warming of permafrost in steep rock walls decreases their mechanical stability and could triggers rockfalls and rockslides. However, the direct link between climate change and permafrost degradation is seldom quantified with precise monitoring techniques and long-term time series. Where boreholes are not possible, laboratory-calibrated Electrical Resistivity Tomography (ERT) is presumably the most accurate quantitative permafrost monitoring technique providing a sensitive record for frozen vs. unfrozen bedrock. Recently, 4D inversions allow also quantification of frozen bedrock extension and of its changes with time (Scandroglio et al., in review).</p><p>In this study we (i) evaluate the influence of the inversion parameters on the volumes and (ii) connect the volumetric changes with measured mechanical consequences.</p><p>The ERT time-serie was recorded between 2006 and 2019 in steep bedrock at the permafrost affected Steintälli Ridge (3100 m asl). Accurately positioned 205 drilled-in steel electrodes in 5 parallel lines across the rock ridge have been repeatedly measured with similar hardware and are compared to laboratory temperature-resistivity (T–ρ) calibration of water-saturated samples from the field. Inversions were conducted using the open-source software BERT for the first time with the aim of estimating permafrost volumetric changes over a decade.</p><p>(i) Here we present a sensitivity analysis of the outcomes by testing various plausible inversion set-ups. Results are computed with different input data filters, data error model, regularization parameter (λ), model roughness reweighting and time-lapse constraints. The model with the largest permafrost degradation was obtained without any time-lapse constraints, whereas constraining each model with the prior measurement results in the smallest degradation. Important changes are also connected to the data error estimation, while other setting seems to have less influence on the frozen volume. All inversions confirmed a drastic permafrost degradation in the last 13 years with an average reduction of 3.900±600 m<sup>3</sup> (60±10% of the starting volume), well in agreement with the measured air temperatures increase.</p><p>(ii) Average bedrock thawing rate of ~300 m<sup>3</sup>/a is expected to significantly influence the stability of the ridge. Resistivity changes are especially evident on the south-west exposed side and in the core of the ridge and are here connected to deformations measured with tape extensometer, in order to precisely estimate the mechanical consequences of bedrock warming.</p><p>In summary, the strong degradation of permafrost in the last decade it’s here confirmed since inversion settings only have minor influence on volume quantification. Internal thermal dynamics need correlation with measured external deformation for a correct interpretation of stability consequences. These results are a fundamental benchmark for evaluating mountain permafrost degradation in relation to climate change and demonstrate the key role of temperature-calibrated 4D ERT.</p><p> </p><p>Reference:</p><p>Scandroglio, R. et al. (in review) ‘4D-Quantification of alpine permafrost degradation in steep rock walls using a laboratory-calibrated ERT approach’, <em>Near Surface Geophysics</em>.</p>

Estimating picking errors in near‐surface seismic data to enable their time‐lapse interpretation of hydrosystems

2018 ◽  
Vol 16 (6) ◽  
pp. 613-625 ◽  
Author(s):  
M. Dangeard ◽  
L. Bodet ◽  
S. Pasquet ◽  
J. Thiesson ◽  
R. Guérin ◽  
...  
Keyword(s):  
Seismic Data ◽  
Time Lapse ◽  
Near Surface
Sign in / Sign up

Export Citation Format

Share Document