Crustal structure of the offshore Labrador margin into deep water from combined seismic reflection interpretation and gravity modeling

2020 ◽  
Vol 8 (2) ◽  
pp. SH1-SH17 ◽  
Author(s):  
J. Kim Welford ◽  
Deric Cameron ◽  
Erin Gillis ◽  
Victoria Mitchell ◽  
Richard Wright
Keyword(s):  
Late Cretaceous ◽  
Seismic Reflection ◽  
Gravity Data ◽  
Gravity Models ◽  
Gravity Modeling ◽  
Data Set ◽  
Shelf Slope ◽  
Gravity Forward Modeling ◽  
Thickness Variations ◽  
Similar Density

A regional long-offset 2D seismic reflection program undertaken along the Labrador margin of the Labrador Sea, Canada, and complemented by the acquisition of coincident gravity data, has provided an extensive data set with which to image and model the sparsely investigated outer shelf, slope, and deepwater regions. Previous interpretation of the seismic data revealed the extent of Mesozoic and Cenozoic basins and resulted in the remapping of the basin configuration for the entire margin. To map the synrift package and improve understanding of the geometry and extent of these basins, we have undertaken joint seismic interpretation and gravity forward modeling to reduce uncertainty in the identification of the prerift basement, which varies between Paleozoic shelfal deposits and Precambrian crystalline rocks, with similar density characteristics. With this iterative approach, we have obtained new depth to basement constraints and have deduced further constraints on crustal thickness variations along the Labrador margin. At the crustal scale, extreme localized crustal thinning has been revealed along the southern and central portions of the Labrador margin, whereas a broad, margin-parallel zone of thicker crust has been detected outboard of the continental shelf along the northern Labrador margin. Our final gravity models suggest that Late Cretaceous rift packages from further south extend along the entire Labrador margin and open the possibility of a Late Cretaceous source rock fairway extending into the Labrador basins.

Low‐cost geophysical investigations of a paleochannel aquifer in the Eastern Goldfields, Western Australia

Geophysics ◽  
2002 ◽  
Vol 67 (3) ◽  
pp. 690-700 ◽  
Author(s):  
Josef Holzschuh
Keyword(s):  
Water Table ◽  
Western Australia ◽  
Seismic Reflection ◽  
Wave Reflection ◽  
Gravity Data ◽  
P Wave ◽  
Gravity Modeling ◽  
S Wave ◽  
Sand And Gravel ◽  
Gravel Aquifer

Compressional (P) wave and shear (S) wave seismic reflection techniques were used to delineate the sand and gravel aquifer within a highly saline clay‐filled paleochannel in the Eastern Goldfields of Western Australia. The seismic refraction and gravity methods were also used to investigate the paleochannel. The unsaturated loose fine‐grained sand up to 10 m in depth at the surface is a major factor in degrading subsurface imaging. The seismic processing needed to be precise, with accurate static corrections and normal moveout corrections. Deconvolution enhanced the aquifer and other paleochannel reflectors. P‐wave reflection and refraction layer depths had good correlation and showed a total of six boundaries: (1) water table, (2) change in velocity (compaction) in the paleochannel sediments, (3) sand and gravel aquifer, (4) red‐brown saprolite and green saprolite boundary, (5) weathered bedrock, and (6) unweathered bedrock. P‐wave explosive and hammer sources were found to have similar signal characteristics, and the aquifer and bedrock were both imaged using the hammer source. The deep shots below the water table have the most broadband frequency response for reflections, but stacking clear reflections was difficult. The S‐wave reflection results showed high lateral and vertical resolution of the basal saprolite clay, the sand and gravel aquifer, and very shallow clays above the aquifer. The S‐wave reflection stacking velocities were 10–20% of the P‐waves, increasing the resolution of the S‐wave section. The gravity data were modelled to fit the known drilling and P‐wave seismic reflection depths. The refraction results did not identify the top of bedrock, so refraction depths were not used for the gravity modeling in this highly weathered environment. The final gravity model mapped the bedrock topography beyond the lateral extent of the seismic and drilling data.

Joint optimization of vertical component gravity and P-wave first arrivals by simulated annealing

Geophysics ◽  
2016 ◽  
Vol 81 (4) ◽  
pp. ID59-ID71 ◽  
Author(s):  
Kyle Basler-Reeder ◽  
John Louie ◽  
Satish Pullammanappallil ◽  
Graham Kent
Keyword(s):  
Simulated Annealing ◽  
Gravity Data ◽  
Vertical Component ◽  
Geothermal Field ◽  
P Wave ◽  
Joint Optimization ◽  
Gravity Modeling ◽  
Deep Basin ◽  
Data Set ◽  
Convolution Model

Joint seismic and gravity analyses of the San Emidio geothermal field in the northwest Basin and Range province of Nevada demonstrate that joint optimization changes interpretation outcomes. The prior 0.3–0.5 km deep basin interpretation gives way to a deeper than 1.3 km basin model. Kirchoff prestack depth migrations reveal that joint optimization ameliorates shallow velocity artifacts, flattening antiformal reflectors that could have been interpreted as folds. Furthermore, joint optimization provides a clearer picture of the rangefront fault by increasing the depth of constrained velocities, which improves reflector coherency at depth. This technique provides new insight when applied to existing data sets and could replace the existing strategy of forward modeling to match gravity data. We have achieved stable joint optimization through simulated annealing, a global optimization algorithm that does not require an accurate initial model. Balancing the combined seismic-gravity objective function is accomplished by a new approach based on analysis of Pareto charts. Gravity modeling uses an efficient convolution model, and the basis of seismic modeling is the highly efficient Vidale eikonal equation traveltime generation technique. Synthetic tests found that joint optimization improves velocity model accuracy and provides velocity control below the deepest headwave raypath. Restricted offset-range migration analysis provides insights into precritical and gradient reflections in the data set.

Deep seismic reflection data across the conjugate margins of the Labrador Sea

1994 ◽  
Vol 31 (1) ◽  
pp. 192-205 ◽  
Author(s):  
C. E. Keen ◽  
P. Potter ◽  
S. P. Srivastava
Keyword(s):  
Seismic Reflection ◽  
Gravity Models ◽  
Labrador Sea ◽  
Data Set ◽  
Crustal Layer ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Lithospheric Extension ◽  
Thin Crust ◽  
Conjugate Margins

A deep seismic reflection transect of the conjugate margins of the Labrador Sea is described, which represents one of the few data sets of this kind. A characteristic reflectivity is ascribed to a 120 km wide ribbon of very thin crust that may be either thinned continental crust, which has perhaps been intruded, or oceanic crust, perhaps modified by the proximity of the continent. Most of the major changes in crustal thickness and in the subsidence and sedimentation patterns on the margins occur landward of these transitional zones, which are found on both margins. An interpretation of these regions as continental in origin is compatible with other seismic observations on the west Greenland margin, but does not match the magnetic anomaly interpretation, which requires the transitional crust to be oceanic in origin. Models that satisfy the gravity anomalies and the subsidence history have been used to assist in interpreting the seismic data. The subsidence models include the effects of decompression melting during lithospheric extension and rifting, and we predict the thickness of igneous crust produced. However, the gravity models suggest that a lower crustal layer may extend farther inland below the Labrador shelf than is predicted by magmatic underplating. The present seismic results, combined with the other geophysical data, are consistent with a pure shear model of lithospheric stretching, with faulting confined to the upper crust. Many of the problems raised by this data set are similar to those identified in comparing the nonvolcanic margin of Iberia with the conjugate Grand Banks margin in the North Atlantic. If the transition zone results from stretching the continental lithosphere, then a large component of the very thin crust there must consist of igneous material formed by melting. Under these conditions a sharp, vertical ocean–continent boundary would be unlikely.

scholarly journals Joint Gravity and Seismic Reflection Methods to Characterize the Deep Aquifers in Arid Ain El Beidha Plain (Central Tunisia, North Africa)

Water ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1310
Author(s):  
Hajer Azaiez ◽  
Hakim Gabtni ◽  
Mourad Bédir
Keyword(s):  
Seismic Reflection ◽  
Large Scale ◽  
Seismic Analysis ◽  
Gravity Data ◽  
Geophysical Methods ◽  
Gravity Anomalies ◽  
Integrated Approach ◽  
Central Tunisia ◽  
Deep Aquifers ◽  
Advanced Analysis

Electric resistivity sounding and tomography, as well as electromagnetic sounding, are the classical methods frequently used for hydrogeological studies. In this work, we propose the development and implementation of an original integrated approach using the unconventional hydro–geophysical methods of gravity and seismic reflection for the fast, large–scale characterization of hydrogeological potential using the Ain El Beidha plain (central Tunisia) as an analogue. Extending the values of vintage petroleum seismic reflection profiles and gravity data, in conjunction with available geological and hydrogeological information, we performed an advanced analysis to characterize the geometry of deep tertiary (Oligocene and Eocene) aquifers in this arid area. Residual and tilt angle gravity maps revealed that most gravity anomalies have a short wavelength. The study area was mainly composed of three major areas: the Oued Ben Zitoun and Ain El Beidha basins, which are both related to negative gravity trends corresponding to low–density subsiding depocenters. These basins are separated by an important NE–SW trend called “El Gonna–J. El Mguataa–Kroumet Zemla” gravity high. Evaluation of the superposition of detected lineaments and Euler deconvolution solutions’ maps showed several NE–SW and N–S relay system faults. The 3D density inversion model using a lateral and vertical cutting plane suggested the presence of two different tectonic styles (thin VS thick). Results from the gravity analysis were in concordance with the seismic analysis. The deep Oligocene and Eocene seismic horizons were calibrated to the hydraulic wells and surrounding outcrops. Oligocene and Eocene geological reservoirs appear very fractured and compartmented. The faulting network also plays an important role in enhancing groundwater recharge process of the Oligocene and Eocene aquifers. Finally, generated isochron maps provided an excellent opportunity to develop future comprehensive exploration surveys over smaller and more favorable areas’ sub–basins.

scholarly journals Comparing global tomography-derived and gravity-based upper mantle density models

2020 ◽  
Vol 221 (3) ◽  
pp. 1542-1554 ◽  
Author(s):  
B C Root
Keyword(s):  
Seismic Tomography ◽  
Upper Mantle ◽  
Seismic Data ◽  
Gravity Data ◽  
Heterogeneous Data ◽  
Clear Correlation ◽  
Data Sets ◽  
Satellite Gravity ◽  
Similar Density ◽  
Similar Peak

SUMMARY Current seismic tomography models show a complex environment underneath the crust, corroborated by high-precision satellite gravity observations. Both data sets are used to independently explore the density structure of the upper mantle. However, combining these two data sets proves to be challenging. The gravity-data has an inherent insensitivity in the radial direction and seismic tomography has a heterogeneous data acquisition, resulting in smoothed tomography models with de-correlation between different models for the mid-to-small wavelength features. Therefore, this study aims to assess and quantify the effect of regularization on a seismic tomography model by exploiting the high lateral sensitivity of gravity data. Seismic tomography models, SL2013sv, SAVANI, SMEAN2 and S40RTS are compared to a gravity-based density model of the upper mantle. In order to obtain similar density solutions compared to the seismic-derived models, the gravity-based model needs to be smoothed with a Gaussian filter. Different smoothening characteristics are observed for the variety of seismic tomography models, relating to the regularization approach in the inversions. Various S40RTS models with similar seismic data but different regularization settings show that the smoothening effect is stronger with increasing regularization. The type of regularization has a dominant effect on the final tomography solution. To reduce the effect of regularization on the tomography models, an enhancement procedure is proposed. This enhancement should be performed within the spectral domain of the actual resolution of the seismic tomography model. The enhanced seismic tomography models show improved spatial correlation with each other and with the gravity-based model. The variation of the density anomalies have similar peak-to-peak magnitudes and clear correlation to geological structures. The resolvement of the spectral misalignment between tomographic models and gravity-based solutions is the first step in the improvement of multidata inversion studies of the upper mantle and benefit from the advantages in both data sets.

scholarly journals Geological evolution of the Chalk Group in the northern Dutch North Sea: inversion, sedimentation and redeposition

2018 ◽  
Vol 156 (07) ◽  
pp. 1265-1284
Author(s):  
EVA VAN DER VOET ◽  
LEONORA HEIJNEN ◽  
JOHN J. G. REIJMER
Keyword(s):  
North Sea ◽  
Late Cretaceous ◽  
Seismic Survey ◽  
Structural Elements ◽  
The North ◽  
Show Evidence ◽  
New Finding ◽  
The North Sea ◽  
Thickness Variations ◽  
Well Data

AbstractIn contrast to the Norwegian and Danish sectors, where significant hydrocarbon reserves were found in chalk reservoirs, limited studies exist analysing the chalk evolution in the Dutch part of the North Sea. To provide a better understanding of this evolution, a tectono-sedimentary study of the Late Cretaceous to Early Palaeogene Chalk Group in the northern Dutch North Sea was performed, facilitated by a relatively new 3D seismic survey. Integrating seismic and biostratigraphic well data, seven chronostratigraphic units were mapped, allowing a reconstruction of intra-chalk geological events.The southwestward thickening of the Turonian sequence is interpreted to result from tilting, and the absence of Coniacian and Santonian sediments in the western part of the study area is probably the result of non-deposition. Seismic truncations show evidence of a widespread inversion phase, the timing of which differs between the structural elements. It started at the end of the Campanian followed by a second pulse during the Maastrichtian, a new finding not reported before. After subsidence during the Maastrichtian and Danian, renewed inversion and erosion occurred at the end of the Danian. Halokinesis processes resulted in thickness variations of chalk units of different ages.In summary, variations in sedimentation patterns in the northern Dutch North Sea relate to the Sub-Hercynian inversion phase during the Campanian and Maastrichtian, the Laramide inversion phase at the end of the Danian, and halokinesis processes. Additionally, the Late Cretaceous sea floor was characterized by erosion through contour bottom currents at different scales and resedimentation by slope failures.

Sign in / Sign up

Export Citation Format

Share Document