Undrained shearing of soft natural clays

2004 ◽  
pp. 173-179 ◽  
Author(s):  
M Koskinen ◽  
M Karstunen
Keyword(s):  
Natural Clays

Cation Equilibria Studies on Fractionated Natural Clays

1968 ◽  
Vol 16 (4) ◽  
pp. 313-318
Author(s):  
Walter Fertl
Keyword(s):  
Natural Clays

scholarly journals Design of Concrete Made with Recycled Brick Waste and Its Environmental Performance

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 463
Author(s):  
Ivan Janotka ◽  
Pavel Martauz ◽  
Michal Bačuvčík
Keyword(s):  
Building Materials ◽  
Research Process ◽  
Added Value ◽  
Recycled Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Type Ii ◽  
Natural Clays ◽  
Natural Aggregates ◽  
Standardized Parameters

In addition to the known uses of natural clays, less publication attention has been paid to clays returned to the production process. Industrially recovered natural clays such as bricks, tiles, sanitary ceramics, ceramic roofing tiles, etc., are applicable in building materials based on concrete as an artificial recycled aggregate or as a pozzolanic type II addition. In this way, the building products with higher added value are obtained from the originally landfilled waste. This paper details the research process of introducing concrete with recycled brick waste (RBW) up to the application output. The emphasis is placed on using a RBW brash as a partial replacement for natural aggregates and evaluating an RBW powder as a type II addition for use in concrete. A set of the results for an RBW is reported by the following: (a) an artificial RBW fine aggregate meets the required standardized parameters for use in industrially made concrete, (b) a RBW powder is suitable for use in concrete as industrially made type II addition TERRAMENT showing the same pozzolanic reactivity as a well-known and broadly used pozzolan-fly ash, and (c) such an RBW as aggregate and as powder are, therefore, suitable for the production of industrially made TRITECH Eco-designed ready-mixed concrete.

Thermal stability and fire reaction of poly(butylene succinate) nanocomposites using natural clays and FR additives

2017 ◽  
Vol 29 (1) ◽  
pp. 69-83 ◽  
Author(s):  
Loic Dumazert ◽  
Damien Rasselet ◽  
Bo Pang ◽  
Benjamin Gallard ◽  
Salima Kennouche ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Butylene Succinate ◽  
Natural Clays

An elastoplastic description of frictional destructuration in natural clays and shales

2017 ◽  
Vol 13 (4) ◽  
pp. 911-924 ◽  
Author(s):  
Morteza Mohamadi ◽  
Richard Wan ◽  
Zhifu Shen
Keyword(s):  
Natural Clays

Compression and consolidation characteristics of structured natural clay

2004 ◽  
Vol 41 (6) ◽  
pp. 1250-1258 ◽  
Author(s):  
J -C Chai ◽  
N Miura ◽  
H -H Zhu ◽  
Yudhbir
Keyword(s):  
Numerical Analysis ◽  
Void Ratio ◽  
Natural Clay ◽  
Hardening Law ◽  
Modified Cam Clay ◽  
Calculated Load ◽  
Natural Clays ◽  
Consolidation Behavior ◽  
Better Than ◽  
Cam Clay

The compression and consolidation behavior of some structured natural clays are discussed. It is shown that for some structured natural clays, the relation between void ratio (e) and mean effective stress (p′) is more linear in a ln(e + ec) – ln(p′) plot (where ec is a soil parameter) than in an e – ln(p′) plot. It is proposed that for structured natural clay with a sensitivity value greater than 4, a linear ln(e + ec) – ln(p′) relation can be used in settlement and consolidation calculation. The effect of introducing a linear ln(e + ec) – ln(p′) relation on the calculated load–settlement curve and consolidation behavior of structured clays is discussed. The linear ln(e + ec) – ln(p′) relation was incorporated into the modified Cam–clay model by modifying the hardening law of the model. It is shown that using the linear ln(e + ec) – ln(p′) relation simulated the consolidation behavior of the structured natural clays better than using the linear e – ln(p′) relation.Key words: structured natural clay, compression, consolidation, constitutive model, numerical analysis.

scholarly journals Natural clays with an inherent uranium component that nevertheless sequester uranium from contaminated water

2018 ◽  
Vol 54 (2) ◽  
pp. 101-109 ◽  
Author(s):  
Antonio Lara ◽  
Emilio Rivera ◽  
Young Ho Park ◽  
Raul Rivera ◽  
Tiffany Fowler ◽  
...  
Keyword(s):  
Contaminated Water ◽  
Natural Clays

scholarly journals Mineralogical characterization of natural clays from Brazilian Southeast region for industrial applications

Cerâmica ◽  
2017 ◽  
Vol 63 (366) ◽  
pp. 253-262 ◽  
Author(s):  
N. I. Alvarez Acevedo ◽  
M. C. G. Rocha ◽  
L. C. Bertolino
Keyword(s):  
Specific Surface ◽  
Clay Fraction ◽  
Exchange Capacity ◽  
Size Analysis ◽  
Mineralogical Characterization ◽  
Southeast Region ◽  
Pore Size Analysis ◽  
Two Samples ◽  
Natural Clays ◽  
Cationic Exchange

Abstract Characterization studies of clays are often performed to identify possible markets for these materials. Bearing this in mind, two samples of natural clays from the Southeast region of Brazil were studied. Conventional techniques of characterization were used. Granulometric analysis and determination of cationic exchange capacity of these clays were also performed. Nitrogen adsorption-desorption measurements were used to determine the Brunauer-Emmett-Teller specific surface area, and Barrett-Joyner-Halenda and t-plot pore size analysis were carried out. The results obtained were similar for the two clays. Both present high clay fraction (above 80 wt%) composed of illite, kaolinite and quartz minerals. Stratified illite-smectite structures were also observed. Traces of calcite were detected in one of the clay samples, while traces of montmorillonite were observed in the other sample. These results were corroborated by the low cationic exchange capacity values obtained for both clays. These clays showed good adsorptive properties, evidenced by their specific surface areas, with predominantly mesoporous structures and slit-like pores. According to their features, these clays have potential use as adsorbents to replace more expensive materials due to their easy availability and low cost.

scholarly journals INCREASING THE STRENGTH AND FROST RESISTANCE OF CERAMIC PRODUCTS AT USING MELASSES BARDS AS PLASTICIZER

2020 ◽  
pp. 19-29
Author(s):  
S.V. Sverguzova ◽  
I. Shayhiev ◽  
Tom Otiti ◽  
Zh.A. Sapronova
Keyword(s):  
Amino Acids ◽  
Citric Acid ◽  
Frost Resistance ◽  
Ceramic Materials ◽  
Calcium Citrate ◽  
Organic Substances ◽  
Ceramic Samples ◽  
Natural Clays ◽  
Loss Of Mass ◽  
Clay Materials

ways of production of ceramic materials with use as the plasticizing additive of the sulphitic and alcohol bards (SAB), the calcium citrate filtrate (CCF) which is liquid withdrawal of production of citric acid in the microbiological way are known. However introduction to raw mix of CoB reduces forming humidity and fall of the formed products insufficiently, and an essential lack of FTsK is the low durability of products on compression with a big volume mass of samples. In work the possibility of use as the plasticizing additive to a clay lot of withdrawal of the spirit industry – melasses bards is investigated. As a part of molasses the remains of amino acids and other organic substances which have the plasticizing effect on clay materials contain. On the example of natural clays of three various fields the plasticizing action melasses bards is proved, and the number of plasticity of the studied clays increases in direct ratio to increase in additive melassny bards in clay raw mix. It is shown that introduction to raw mix melasses bards leads to improvement of appearance of pottery, decrease in jointing, increase in durability for Veselovsky clay for 7%, for the Oryol clay for 67%, for Bessonovskaya – for 23%. Research of the received ceramic samples on frost resistance according to requirements of GOST bards unlike the products which aren’t containing additive bards showed high frost resistance of products with additive melass. Also lowered decrease in durability and loss of mass of the samples containing additive melassny bards is noted

scholarly journals Investigation of activated Al-pillared clay efficiency in vegetable oil purification

2004 ◽  
pp. 31-36 ◽  
Author(s):  
Gizela Lomic ◽  
Erne Kis ◽  
Etelka Dimic ◽  
Ranko Romanic
Keyword(s):  
Surface Area ◽  
Vegetable Oil ◽  
Total Pore Volume ◽  
Textural Properties ◽  
Sample Surface ◽  
Pillared Clay ◽  
Acid Activation ◽  
Micropore Surface Area ◽  
Natural Clays ◽  
Oil Purification

This paper represents a contribution to the applicability of natural clays and their derivates as adsorbents in the process of purification of vegetable oil. Investigation of textural properties of raw and purified clay samples reveals that during acid activation and Al-pillaring, BET and micropore surface area increases significantly. However, bleaching capacity of clay and its derivates is not determined by using sample surface area, but rather sample total pore volume. Surface area, especially micropore surface area contributes to removal of smaller molecules. This was confirmed by successful elimination of moisture and volatile materials by samples with an appropriate micropore structure. Used samples of clay and its derivates do not significantly influence acid and peroxide values of raw sunflower oil during its treatment.

Sign in / Sign up

Export Citation Format

Share Document