Influence of Soil Genesis Factors on Gurghiu Mountain Forest Soils’ Physical and Chemical Properties

This research aimed to determine the values of chemical properties and the relationships between the main pedoecological factors that characterize the soils in the Gurghiu Mountains. The mapping surveys were carried out on an area of 4,647.36 ha located in the mixed mountain forest sites (FM2) (1,000–1,400 m altitude). The area was stratified into homogeneous site units in terms of climate, hydricity, and trophicity. At the level of the elementary site units, 35 main soil profiles and 46 control profiles were placed. The number of profiles was determined statistically to ensure an error of no more than 10%. Soil samples collected from the main profiles were analyzed in the laboratory. Soil’s properties values decreased on the soil’s profile (humus content from 15 to 2%, nitrogen from 1.1 to 0.5%, sum of exchangeable hydrogen from 20 to 9 me/100 g soil, and total cationic exchange capacity from 38 to 20 me/100 g soil), except the pH and the base saturation degree (the pH increased on profile from 4.5 to 6, and the base saturation degree from 40 to 70%). The soil properties, except for moisture, were significantly affected by altitude, and decreased when the altitude increased. Soil trophicity can be characterized by a soil index, the values of which were between 17 and 42 for the analyzed soils. These values indicated soil-specific trophicity levels from oligotrophic to eutrophic.

Effect of Oxycations in Clay Mineral on Adsorption—Vanadyl Exchange Bentonites and Their Ability for Amiloride Removal

The presence of drugs in aquatic bodies is a prevailing issue, and their removal by adsorption is an effective treatment. Among the adsorbents, those based clay minerals have been proposed. Bentonite is a clay mineral that is widely studied as an adsorbent due to its unique physicochemical properties, such as cation exchange capacity (CEC), intercalation, and adsorption. The properties of bentonites can be improved through chemical modifications, such as the incorporation of organic and/or inorganic compounds. These modifications allow for the efficient removal of different contaminants, including pharmaceutical compounds. In this work, raw sodium bentonite (Na+-Bent) and vanadyl bentonites were prepared using 100 (BentV1), 300 (BentV3), and 500% (BentV5) of the cationic exchange capacity of the Na+-Bent and further used for amiloride removal from aqueous solution. Analysis of X-ray fluorescence and Na+ in solution after interaction indicated that the principal mechanism of interaction between bentonite and ions was the ion exchange between sodium of the matrix and vanadyl in solution. Infrared spectroscopy suggested the contribution of coordination of the interlayer water with the vanadyl ions and hydrogen bonding between vanadyl and structural OH. X-ray diffraction analysis indicated that vanadyl ions were incorporated onto Na+-Bent. Amiloride adsorption was better at pH 5.8, using a solid dosage of 75 mg of Na+-Bent, 25 mg of BentV1 and BentV5, and 50 mg of BentV3. The adsorption occurred briefly until 20 min, and maximum removal values were 457.08, 374.64, 102.56, and 25.63 mg·g−1 for Na+-Bent, BentV1, BentV3, and BentV5, respectively. At lower drug concentrations (48.78 and 91.24 mg·g−1 for Na+-Bent and BentV3), the best performance was obtained for the BentV3 sample.

Assessing the Performance of Environmentally Friendly-Produced Zerovalent Iron Nanoparticles to Remove Pharmaceuticals from Water

Nano zerovalent iron (nZVI), produced from green tea extracts, was incorporated in a cation exchange resin (R-nFe) to investigate its performance regarding the removal of four non-steroidal anti-inflammatory drugs (NSAIDs): ibuprofen (IBU), naproxen (NPX), ketoprofen (KTP) and diclofenac (DCF). The effect of contact time, NaCl pretreatment, pH, R-nFe dose, the role of the supporting material, the initial concentration of pollutants, and the combined effect of nZVI with oxidative reagents was assessed through a series of batch experiments. According to the results, the best removal efficiencies obtained for DCF and KTP were 86% and 73%, respectively, at 48 h of contact time with NaCl pretreated R-nFe at a dose of 15 g L−1 and a pH of 4. The maximum removal efficiency for NPX was 90% for a contact time of 60 min with PS 1 mM and a pH of 3, which was quite similar to the experiment with a greater contact time of 48 h without PS addition. The maximum IBU removal was 70%; this was reached at pH 3, with a contact time of 30 min and R-nFe 15 g L−1. To the authors’ best knowledge, this is the first study investigating the utilization of nZVI, produced from leaf extracts and incorporated into a cationic exchange resin, to remove NSAIDs from water.

Adsorption Behavior of Cationic Dye on Bentonite Functionalized With 3-aminopropyltriethoxysilane

The current study focused on the modification of Algerian bentonite clay (Bent) with the product of hydrolysis of 3-aminopropyltriethoxysilane (APTES) using the intercalation process. The modified clay (Bent-APTES) was investigated as an adsorbent solid for methylene blue dye (MB) removal from wastewater.The Bent-APTES was characterized by X-ray diffraction (XRD), chemical analyses, Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The cationic exchange capacity was also determined. Several adsorption parameters were evaluated on the adsorption performance. The results showed that the equilibrium adsorption data was found to fit better to the Langmuir adsorption model, and the adsorption capacity for the removal of MB on Bent-APTES was 217.39 mg g-1. The kinetic process of adsorption could be described by the pseudo-second order model. Consequently, the modified clay could be served as an efficient adsorbent for cationic dyes in wastewater treatment.

Evolutionary Implications of a Peroxidase with High Affinity for Cinnamyl Alcohols from Physcomitrium patens, a Non-Vascular Plant

Physcomitrium (Physcomitrella) patens is a bryophyte highly tolerant to different stresses, allowing survival when water supply is a limiting factor. This moss lacks a true vascular system, but it has evolved a primitive water-conducting system that contains lignin-like polyphenols. By means of a three-step protocol, including ammonium sulfate precipitation, adsorption chromatography on phenyl Sepharose and cationic exchange chromatography on SP Sepharose, we were able to purify and further characterize a novel class III peroxidase, PpaPrx19, upregulated upon salt and H2O2 treatments. This peroxidase, of a strongly basic nature, shows surprising homology to angiosperm peroxidases related to lignification, despite the lack of true lignins in P. patens cell walls. Moreover, PpaPrx19 shows catalytic and kinetic properties typical of angiosperm peroxidases involved in oxidation of monolignols, being able to efficiently use hydroxycinnamyl alcohols as substrates. Our results pinpoint the presence in P. patens of peroxidases that fulfill the requirements to be involved in the last step of lignin biosynthesis, predating the appearance of true lignin.

Habitat complexity and mite population on Caryocar brasiliense trees

. The objective was to study the habitat complexity of mite populations on Caryocar brasiliense trees under natural and cultivated field conditions. The study was performed in the municipality of Montes Claros, in the state of Minas Gerais, Brazil, over 3 years. Three types of areas were studied: 1) Cerrado, 2) pasture, and 3) a university Campus. Several chlorotic spots were detected on leaves with larger populations of Tetranychus sp. and Eutetranychus sp. (Tetranychidae). The greatest numbers of Agistemus sp. (Stigmaeidae) on leaves and Histiostoma sp. (Histiostomidae) and Proctolaelaps sp. (Ascidae) on fruits were observed in the pasture, and that of Histiostoma sp. on leaves in the pasture and on the university Campus. In general, the herbivorous mites (e.g., Tetranychus sp.) found on C. brasiliense plants were correlated with more clayey soils with a higher cationic exchange capacity; larger populations of mites (e.g., Agistemus sp. and Histiostoma sp.) were found on the C. brasiliense trees with the largest crown sizes; and associations between predator mites (e.g., Agistemus sp.) and phytophagous mites (e.g., Tetranychus sp.1) were observed. Greater habitat diversity and more complex plant architectures favored the mite populations. The positive effect of loamier soil on herbivorous mites indicates that these species are adapted to Cerrado conditions. Some recorded species of herbivorous mites can be pests in commercial plantations of C. brasiliense.

Use of Porous no Metallic Minerals to Remove Heavy Metals, Precious Metals and Rare Earths, by Cationic Exchange

This chapter is related with the preliminary study of some non-metallic minerals to evaluate their cationic exchange capacity, to remove heavy and precious metals, as well as rare earths elements. The minerals and materials used to execute the ion metals removal were bentonite, phosphorite, and diatomite. The chapter shows the physicochemical behavior of all these minerals, which were used to remove the mentioned elements from solutions coming from ore leaching. It was found that in all cases, the removal of heavy and precious metals, as well as rare earths elements reached over 90%. Although, there were minimal differences in efficiency for all minerals used (bentonite, phosphorite, and diatomite), it could be pointed that the phosphorite has the best results going from 99.43% of removal of Gd, to 99.95–100% for the case of Ce, Nd, La, Yb, Eu, Er, Sm, Tb, Ge, Pd, Pt, and Au.