Study on Indirect Tensile Fatigue Performance of Hot in Place Asphalt Mixture

2021 ◽  
Vol 11 (08) ◽  
pp. 901-910
Author(s):  
雄 申
Keyword(s):  
Asphalt Mixture ◽  
Fatigue Performance ◽  
Tensile Fatigue ◽  
Indirect Tensile

scholarly journals Laboratory Study on the Fatigue Resistance of Asphaltic Concrete Containing Titanium Dioxide

2018 ◽  
Vol 34 ◽  
pp. 01021
Author(s):  
Rosnawati Buhari ◽  
Mohd Ezree Abdullah ◽  
Mohd Khairul Ahmad ◽  
Saiful Azhar Tajudin ◽  
Siti Khatijah Abu Bakar
Keyword(s):  
Titanium Dioxide ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Fatigue Performance ◽  
Fatigue Properties ◽  
Modified Asphalt ◽  
Tensile Fatigue ◽  
Asphalt Mix ◽  
Rotational Viscosity ◽  
Indirect Tensile

This study aims to evaluate the fatigue performance of modified asphalt mixture using Indirect Tensile Fatigue Test. Titanium Dioxide (TiO2) powder in a form of rutile was used for producing asphalt concrete with lower mixing and compaction temperature compared to conventional hot mix asphalt without reducing its physical and mechanical also resistance to fatigue. The characteristic of the asphalt and modified asphalt was evaluated using penetration test, softening test and rotational viscosity test. Titanium dioxide of 2%, 4%, 6%, 8% and 10% by weight of asphalt has been incorporated into unaged 80/100 asphalt mix in order to improvise its performance and to fulfill the objectives of this experimental study. As a result, TiO2 as an additive is potential to decrease the penetration and increasing the softening point of the asphalt. In terms of fatigue performance testing, addition TiO2 additive does help in improving the fatigue properties as it shows greater result than the control asphalt. In conclusion, TiO2 is great in improving fatigue properties.

scholarly journals Fatigue Resistance Characterization of Warm Asphalt Rubber by Multiple Approaches

2018 ◽  
Vol 8 (9) ◽  
pp. 1495 ◽  
Author(s):  
Jiangmiao Yu ◽  
Xianshu Yu ◽  
Zheming Gao ◽  
Feng Guo ◽  
Duanyi Wang ◽  
...  
Keyword(s):  
Fatigue Test ◽  
Fatigue Resistance ◽  
Crumb Rubber ◽  
Waste Recycling ◽  
Fatigue Performance ◽  
Four Point Bending ◽  
Asphalt Rubber ◽  
Shear Fatigue ◽  
Tensile Fatigue ◽  
Indirect Tensile

Warm asphalt rubber (WAR) mixture is a sustainable paving material with advantages including waste recycling and noise reducing. A comprehensive understanding of the fatigue performance of WAR specimens is helpful to its wide application. However, research on evaluating the fatigue performance of WAR binder and mixtures is very limited. This paper applies five fatigue analysis approaches to evaluate the fatigue life of WAR samples with three different warm mix asphalt (WMA) additives. The conventional G*sinδ, linear amplitude sweep (LAS), indirect tensile fatigue test (ITFT), and four-point bending beam (4PB) test were conducted based on available standards. In addition, a novel shear fatigue test was performed on WAR mortars. Test results indicated that the incorporation of crumb rubber has a significantly positive effect on fatigue resistance. WAR with chemical and foaming additives exhibited a poorer performance than asphalt rubber (AR), but their fatigue performance was still greatly superior to the non-rubberized samples. Finally, LAS as well as mortar shear fatigue and 4PB tests provided the same prediction of fatigue resistance, while the results of G*sinδ and the ITFT were inconsistent. It is recommended to use LAS, the mortar shear fatigue test, and the 4PB test for the fatigue resistance evaluation of rubberized specimens. The validation of the findings with more materials and field performances is recommended.

scholarly journals Rutting and Fatigue Performance Evaluation of Qingchuan Rock Modified Asphalt Mixture

2016 ◽  
Vol 10 (1) ◽  
pp. 511-523 ◽  
Author(s):  
Li Limin ◽  
He Zhaoyi ◽  
Liu Weidong ◽  
Hu Cheng ◽  
Liu Yang
Keyword(s):  
Fatigue Damage ◽  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Fatigue Performance ◽  
Raw Material ◽  
Loading Test ◽  
Modified Asphalt ◽  
Tensile Fatigue ◽  
Dynamic Creep

To solve the problem of rutting and fatigue damage to asphalt pavement, rutting and fatigue performances of Qingchuan rock asphalt modified asphalt were studied, based on the dynamic shear rheometer test, the dynamic creep test, the rutting test, the indirect tensile fatigue test, the small-sized acceleration loading test, the compressive resilient modulus test, the BISAR3.0 Program and the rutting calculation method based on dynamic finite element method. The results indicate that Qingchuan rock asphalt modifier can obviously improve the anti-fatigue performance and anti-rutting performance of asphalt pavement. Taking the anti-rutting performance and the raw-material price of asphalt into consideration, a rock asphalt optimum content ranging from 5% to 8% is suggested. Qingchuan rock asphalt is a good modifier to solve the rutting and the fatigue damage of asphalt pavement.

scholarly journals Evaluation of Fatigue Life of CRM-Reinforced SMA and Its Relationship to Dynamic Stiffness

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Nuha Salim Mashaan ◽  
Mohamed Rehan Karim ◽  
Mahrez Abdel Aziz ◽  
Mohd Rasdan Ibrahim ◽  
Herda Yati Katman ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Fatigue Test ◽  
Resilient Modulus ◽  
Dynamic Stiffness ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Crumb Rubber ◽  
Fatigue Properties ◽  
Tensile Fatigue ◽  
Indirect Tensile

Fatigue cracking is an essential problem of asphalt concrete that contributes to pavement damage. Although stone matrix asphalt (SMA) has significantly provided resistance to rutting failure, its resistance to fatigue failure is yet to be fully addressed. The aim of this study is to evaluate the effect of crumb rubber modifier (CRM) on stiffness and fatigue properties of SMA mixtures at optimum binder content, using four different modification levels, namely, 6%, 8%, 10%, and 12% CRM by weight of the bitumen. The testing undertaken on the asphalt mix comprises the dynamic stiffness (indirect tensile test), dynamic creep (repeated load creep), and fatigue test (indirect tensile fatigue test) at temperature of 25°C. The indirect tensile fatigue test was conducted at three different stress levels (200, 300, and 400 kPa). Experimental results indicate that CRM-reinforced SMA mixtures exhibit significantly higher fatigue life compared to the mixtures without CRM. Further, higher correlation coefficient was obtained between the fatigue life and resilient modulus as compared to permanent strain; thus resilient modulus might be a more reliable indicator in evaluating the fatigue life of asphalt mixture.

scholarly journals Discrete Element Analysis of Indirect Tensile Fatigue Test of Asphalt Mixture

2019 ◽  
Vol 9 (2) ◽  
pp. 327 ◽  
Author(s):  
Xuelian Li ◽  
Xinchao Lv ◽  
Xueying Liu ◽  
Junhong Ye
Keyword(s):  
Fatigue Test ◽  
Asphalt Mixture ◽  
Discrete Element ◽  
Particle Flow Code ◽  
Displacement Curve ◽  
Distribution Characteristics ◽  
Load Curve ◽  
Element Analysis ◽  
Tensile Fatigue ◽  
Indirect Tensile

In order to investigate the damage to microstructure and some other micromechanical responses during a fatigue test on asphalt mixture, Particle Flow Code (PFC) was used to reconstruct a two-dimensional discrete element model of asphalt mixture, based on computed tomography (CT) images and image-processing techniques. The indirect tensile fatigue test of asphalt mixture was simulated with this image-based microstructural model, and verified in the laboratory. It was found that there were four stages during the fatigue failure: no crack, crack initiation, crack developing, and interconnected crack. Cracks mainly developed between the aggregate and asphalt mortar, near the loading axis. The corresponding stages of failure, the developing trend and the distribution characteristics of the cracks matched well with those in the laboratory test. Furthermore, the trends of both the time-load curve and time-displacement curve from the simulation test were also consistent with those from the experimental test. In short, the distribution characteristics of cracks and internal forces of asphalt mixture show that it is feasible to simulate the fatigue performance of the asphalt mixture by a discrete element method (DEM).

scholarly journals Binder and Mixture Fatigue Performance of Plant-Produced Road Surface Course Asphalt Mixtures with High Contents of Reclaimed Asphalt

2019 ◽  
Vol 11 (13) ◽  
pp. 3752 ◽  
Author(s):  
Subhy ◽  
Pires ◽  
Carrión ◽  
Presti ◽  
Airey
Keyword(s):  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Road Surface ◽  
Fatigue Performance ◽  
Fatigue Properties ◽  
Dissipated Energy ◽  
Reclaimed Asphalt ◽  
Tensile Fatigue ◽  
Fatigue Characteristics

The aged properties of Reclaimed Asphalt (RA) binders are one of the main factors working against their utilisation in high-RA content (>30%) mixes for surface courses. Fatigue cracking is the main distress of surface courses that are manufactured with a high percentage of RA. This investigation presents results of the rheological and fatigue results of different asphalt mixtures and their recovered binders. The binders were recovered from asphalt mixtures that had been manufactured in asphalt plants using different amounts of RA with contents up to 60% with and without rejuvenators. Two different sources of RA were used, representing a moderately aged RA and an extremely aged RA. The Dynamic Shear Rheometer (DSR) was used to assess the fatigue-characteristics of the binders using time sweep tests while the fatigue characteristics of their mixtures were assessed using the Indirect Tensile Fatigue Test (ITFT). The fatigue data was analysed based on the cumulative dissipated energy approach in addition to traditional fatigue analysis. Results have shown that the ageing condition of RA significantly affects the fatigue properties of recovered binders. Binder and asphalt mixture fatigue results showed that RA contents up to 60% can produce comparable fatigue performance compared to lower percentages of RA in road surface course if the aged RA binder is sufficiently rejuvenated.

scholarly journals Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

2020 ◽  
Vol 15 (55) ◽  
pp. 187-197
Author(s):  
Sari Sharif Ali ◽  
Mahyar Arabani ◽  
Hassan Latifi
Keyword(s):  
Mechanical Performance ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Thermal Gravimetric ◽  
Tensile Fatigue ◽  
The Matrix ◽  
Successful Technique ◽  
Indirect Tensile ◽  
Encapsulation Method ◽  
Mixture Samples

In this study, in order to evaluate the effects of heavy vacuum slops (H.V.S) as rejuvenator and nano-Zycosil as an anti-stripping agent on used encapsulation method and mechanical performance of asphalt mixture samples, scanning electron microscopy (SEM), computerized tomography (CT) scan and thermal gravimetric (TG) analyses and also, indirect tensile strength (ITS) and indirect tensile fatigue (ITF) tests were performed. First, an encapsulation procedure to prepare different specimens including modified and unmodified samples with nano-Zycosil was done. In the following, morphology of the nano-Zycosil-modified capsules and aggregates were particularly evaluated. Considering the morphology evaluation and TG analysis diagrams, it was found that most of the capsules resisted the mixing procedure of the asphalt mixture. So, the encapsulation procedure used in this study was a successful technique. In addition, modification with nano-Zycosil as an anti-stripping agent significantly improved the adhesion strength in the matrix of capsules-aggregates-asphalt binder by converting the adhesion type from silanolian to siloxane. Overall, modification of capsules and main aggregates together with nano-Zycosil significantly improved moisture resistance and mechanical performance of asphalt mixture samples.

scholarly journals Investigation of Crack Propagation and Healing of Asphalt Concrete Using Digital Image Correlation

2019 ◽  
Vol 9 (12) ◽  
pp. 2459 ◽  
Author(s):  
Navid Hasheminejad ◽  
Cedric Vuye ◽  
Alexandros Margaritis ◽  
Bart Ribbens ◽  
Geert Jacobs ◽  
...  
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Image Correlation ◽  
Asphalt Pavements ◽  
Rest Periods ◽  
Tensile Fatigue ◽  
Indirect Tensile ◽  
Time Required

The fatigue performance and healing ability of asphalt pavements are important for mixture design, rehabilitation, and maintenance of the roads. By analyzing these parameters in an asphalt mixture, it is possible to predict the crack formation and propagation in asphalt pavements and healing of these cracks during the rest periods. The healing effect in asphalt mixtures has been observed and verified by many researchers and different methods exist to evaluate this phenomenon. However, current methods are still inadequate to fully observe and quantify the healing phenomenon in asphalt mixtures. In this study, a digital image correlation (DIC) method is used to calculate the strain map on the surface of cylindrical asphalt specimens during the indirect tensile fatigue test. This strain map is used to detect the location of crack initiations and development of the microcracks during the experiments. Next, the specimens are unloaded and the temperature of the climate chamber is increased to 60 °C for 18 h to investigate the healing phenomenon on the surface of the specimens. It is observed that the strain reduces near the microcrack areas especially at the tip of the microcracks. Furthermore, using DIC it is possible to observe the healing rate and the minimum time required to heal the microcracks on the surface of the specimens.

scholarly journals Rejuvenation Mechanism of Asphalt Mixtures Modified with Crumb Rubber

CivilEng ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 370-384
Author(s):  
Hossein Noorvand ◽  
Kamil Kaloush ◽  
Jose Medina ◽  
Shane Underwood
Keyword(s):  
Tensile Strength ◽  
Dynamic Loading ◽  
Creep Compliance ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Indirect Tensile Strength ◽  
Laboratory Evaluation ◽  
Strength Testing ◽  
Noise Mitigation ◽  
Indirect Tensile

Asphalt aging is one of the main factors causing asphalt pavements deterioration. Previous studies reported on some aging benefits of asphalt rubber mixtures through laboratory evaluation. A field observation of various pavement sections of crumb rubber modified asphalt friction courses (ARFC) in the Phoenix, Arizona area indicated an interesting pattern of transverse/reflective cracking. These ARFC courses were placed several years ago on existing jointed plain concrete pavements for highway noise mitigation. Over the years, the shoulders had very noticeable and extensive cracking over the joints; however, the driving lanes of the pavement showed less cracking formation in severity and extent. The issue with this phenomenon is that widely adopted theories that stem from continuum mechanics of materials and layered mechanics of pavement systems cannot directly explain this phenomenon. One hypothesis could be that traffic loads continually manipulate the pavement over time, which causes some maltenes (oils and resins) compounds absorbed in the crumb rubber particles to migrate out leading to rejuvenation of the mastic in the asphalt mixture. To investigate the validity of such a hypothesis, an experimental laboratory testing was undertaken to condition samples with and without dynamic loads at high temperatures. This was followed by creep compliance and indirect tensile strength testing. The results showed the higher creep for samples aged with dynamic loading compared to those aged without loading. Higher creep compliance was attributed to higher flexibility of samples due to the rejuvenation of the maltenes. This was also supported by the higher fracture energy results obtained for samples conditioned with dynamic loading from indirect tensile strength testing.

Sign in / Sign up

Export Citation Format

Share Document