scholarly journals Laboratory Study on the Fatigue Resistance of Asphaltic Concrete Containing Titanium Dioxide

2018 ◽  
Vol 34 ◽  
pp. 01021
Author(s):  
Rosnawati Buhari ◽  
Mohd Ezree Abdullah ◽  
Mohd Khairul Ahmad ◽  
Saiful Azhar Tajudin ◽  
Siti Khatijah Abu Bakar
Keyword(s):  
Titanium Dioxide ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Fatigue Performance ◽  
Fatigue Properties ◽  
Modified Asphalt ◽  
Tensile Fatigue ◽  
Asphalt Mix ◽  
Rotational Viscosity ◽  
Indirect Tensile

This study aims to evaluate the fatigue performance of modified asphalt mixture using Indirect Tensile Fatigue Test. Titanium Dioxide (TiO2) powder in a form of rutile was used for producing asphalt concrete with lower mixing and compaction temperature compared to conventional hot mix asphalt without reducing its physical and mechanical also resistance to fatigue. The characteristic of the asphalt and modified asphalt was evaluated using penetration test, softening test and rotational viscosity test. Titanium dioxide of 2%, 4%, 6%, 8% and 10% by weight of asphalt has been incorporated into unaged 80/100 asphalt mix in order to improvise its performance and to fulfill the objectives of this experimental study. As a result, TiO2 as an additive is potential to decrease the penetration and increasing the softening point of the asphalt. In terms of fatigue performance testing, addition TiO2 additive does help in improving the fatigue properties as it shows greater result than the control asphalt. In conclusion, TiO2 is great in improving fatigue properties.

THE PHYSICAL AND RHEOLOGICAL CHARACTERISTICS OF MODIFIED ASPHALT BINDER WITH TITANIUM DIOXIDE R15

2016 ◽  
Vol 78 (7-3) ◽  
Author(s):  
Rosnawati Buhari ◽  
Chong Ai Ling ◽  
Mohd Ezree Abdullah ◽  
Siti Khatijah Abu Bakar ◽  
Nurul Hidayah Mohd Kamarudin ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Complex Modulus ◽  
Asphalt Binder ◽  
Modified Asphalt ◽  
Performance Grade ◽  
Modified Asphalt Binder ◽  
Asphalt Mix ◽  
Rotational Viscosity ◽  
Nano Titanium Dioxide ◽  
And Control

The objectives of this study include determine the physical and rheological properties of the modified asphalt and also to examine the effectiveness of TiO2 in lowering the viscosity of the asphalt compared to control asphalt. Nano-titanium dioxide R15 of 2%, 4%, 6%, 8% and 10% by weight of asphalt has been incorporated into unaged 80/100 asphalt mix in order to improvise its performance. The asphalt modified and control were examine using penetration test, softening point test, storage stability test, dynamic shear rheometer test (DSR), rotational viscosity (RV) and rolling thin film oven test (RTFO). As a conclusion, the decrease in compaction and mixing temperature of modified asphalt compared to original asphalt shows an improvement in the viscosity of the asphalt. Through DSR, the nano-TiO2 modified asphalt does not degrade the performance grade when compared to control asphalt, where the values of complex modulus, G* does not differ much from each other for each of the concentration. This indicates that the modified asphalt is as competent as the original binder in resisting rutting at high temperature.

scholarly journals Rutting and Fatigue Performance Evaluation of Qingchuan Rock Modified Asphalt Mixture

2016 ◽  
Vol 10 (1) ◽  
pp. 511-523 ◽  
Author(s):  
Li Limin ◽  
He Zhaoyi ◽  
Liu Weidong ◽  
Hu Cheng ◽  
Liu Yang
Keyword(s):  
Fatigue Damage ◽  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Fatigue Performance ◽  
Raw Material ◽  
Loading Test ◽  
Modified Asphalt ◽  
Tensile Fatigue ◽  
Dynamic Creep

To solve the problem of rutting and fatigue damage to asphalt pavement, rutting and fatigue performances of Qingchuan rock asphalt modified asphalt were studied, based on the dynamic shear rheometer test, the dynamic creep test, the rutting test, the indirect tensile fatigue test, the small-sized acceleration loading test, the compressive resilient modulus test, the BISAR3.0 Program and the rutting calculation method based on dynamic finite element method. The results indicate that Qingchuan rock asphalt modifier can obviously improve the anti-fatigue performance and anti-rutting performance of asphalt pavement. Taking the anti-rutting performance and the raw-material price of asphalt into consideration, a rock asphalt optimum content ranging from 5% to 8% is suggested. Qingchuan rock asphalt is a good modifier to solve the rutting and the fatigue damage of asphalt pavement.

scholarly journals Evaluation of Fatigue Life of CRM-Reinforced SMA and Its Relationship to Dynamic Stiffness

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Nuha Salim Mashaan ◽  
Mohamed Rehan Karim ◽  
Mahrez Abdel Aziz ◽  
Mohd Rasdan Ibrahim ◽  
Herda Yati Katman ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Fatigue Test ◽  
Resilient Modulus ◽  
Dynamic Stiffness ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Crumb Rubber ◽  
Fatigue Properties ◽  
Tensile Fatigue ◽  
Indirect Tensile

Fatigue cracking is an essential problem of asphalt concrete that contributes to pavement damage. Although stone matrix asphalt (SMA) has significantly provided resistance to rutting failure, its resistance to fatigue failure is yet to be fully addressed. The aim of this study is to evaluate the effect of crumb rubber modifier (CRM) on stiffness and fatigue properties of SMA mixtures at optimum binder content, using four different modification levels, namely, 6%, 8%, 10%, and 12% CRM by weight of the bitumen. The testing undertaken on the asphalt mix comprises the dynamic stiffness (indirect tensile test), dynamic creep (repeated load creep), and fatigue test (indirect tensile fatigue test) at temperature of 25°C. The indirect tensile fatigue test was conducted at three different stress levels (200, 300, and 400 kPa). Experimental results indicate that CRM-reinforced SMA mixtures exhibit significantly higher fatigue life compared to the mixtures without CRM. Further, higher correlation coefficient was obtained between the fatigue life and resilient modulus as compared to permanent strain; thus resilient modulus might be a more reliable indicator in evaluating the fatigue life of asphalt mixture.

scholarly journals Laboratory and Field Investigation of the Feasibility of Crumb Rubber Waste Application to Improve the Flexibility of Anti-Rutting Performance of Asphalt Pavement

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1738 ◽  
Author(s):  
Hongyin Li ◽  
Hailong Jiang ◽  
Wenwu Zhang ◽  
Peng Liu ◽  
Shanshan Wang ◽  
...  
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Crumb Rubber ◽  
Field Investigation ◽  
Compression Tests ◽  
Modified Asphalt ◽  
Asphalt Mix ◽  
Low Temperature Cracking ◽  
Indirect Tensile

Resistance of asphalt mix to low-temperature cracking and rutting at high temperature is very important to ensure the service performance of asphalt pavement under seasonal changes in temperature and loading. However, it is challenging to balance the improvement of such resistance by using additives, e.g., anti-rutting agent (ARA). This study focuses on improving the flexibility of anti-rutting asphalt mix by incorporating crumb rubber (CR) and ARA. The properties of the prepared modified asphalt mix were evaluated in the laboratory by performing wheel tracking, three-point bending, indirect tensile, and uniaxial compression tests. The experimental results showed that the dynamic stability of modified asphalt mix was significantly increased due to the addition of ARA and further improved by incorporating CR. The maximum bending strain at −10 °C was increased due to the contribution of CR. The results of indirect tensile strength and resilient modulus further indicated that the CR-modified anti-rutting mixture was more flexible. Moreover, the field observation and evaluation indicated that the CR-modified anti-rutting asphalt pavement met the standard requirements, better than normal asphalt mixture in many parameters. A conclusion can be made that incorporating CR in asphalt mixture prepared with ARA can improve pavement performance at both high and low in-service temperatures.

scholarly journals Binder and Mixture Fatigue Performance of Plant-Produced Road Surface Course Asphalt Mixtures with High Contents of Reclaimed Asphalt

2019 ◽  
Vol 11 (13) ◽  
pp. 3752 ◽  
Author(s):  
Subhy ◽  
Pires ◽  
Carrión ◽  
Presti ◽  
Airey
Keyword(s):  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Road Surface ◽  
Fatigue Performance ◽  
Fatigue Properties ◽  
Dissipated Energy ◽  
Reclaimed Asphalt ◽  
Tensile Fatigue ◽  
Fatigue Characteristics

The aged properties of Reclaimed Asphalt (RA) binders are one of the main factors working against their utilisation in high-RA content (>30%) mixes for surface courses. Fatigue cracking is the main distress of surface courses that are manufactured with a high percentage of RA. This investigation presents results of the rheological and fatigue results of different asphalt mixtures and their recovered binders. The binders were recovered from asphalt mixtures that had been manufactured in asphalt plants using different amounts of RA with contents up to 60% with and without rejuvenators. Two different sources of RA were used, representing a moderately aged RA and an extremely aged RA. The Dynamic Shear Rheometer (DSR) was used to assess the fatigue-characteristics of the binders using time sweep tests while the fatigue characteristics of their mixtures were assessed using the Indirect Tensile Fatigue Test (ITFT). The fatigue data was analysed based on the cumulative dissipated energy approach in addition to traditional fatigue analysis. Results have shown that the ageing condition of RA significantly affects the fatigue properties of recovered binders. Binder and asphalt mixture fatigue results showed that RA contents up to 60% can produce comparable fatigue performance compared to lower percentages of RA in road surface course if the aged RA binder is sufficiently rejuvenated.

scholarly journals Investigating Effects of Nano/SBR Polymer on Rutting Performance of Binder and Asphalt Mixture

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Mahmoud Ameri ◽  
Mostafa Vamegh ◽  
Hamed Rooholamini ◽  
Farshad Haddadi
Keyword(s):  
Positive Impact ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Rutting Resistance ◽  
Modified Asphalt ◽  
Dynamic Creep ◽  
Modified Asphalt Binder ◽  
Asphalt Mix ◽  
Rotational Viscosity ◽  
Wheel Track

Rutting is one of the most common distresses in flexible pavements and can affect vehicle controlling features. Although asphalt binder constitutes a small percentage of the asphalt mixture, its properties play a crucial role in pavement performance and its rutting resistance. One way of improving binder properties and rutting resistance is to use additives. In this research, nanoclay and SBR polymer have been simultaneously used to modify 60–70 penetration binder to study rutting resistance of binder and asphalt mixture. To this end, the storage stability, rotational viscosity, DSR, and RCR tests on binder and marshal stability were performed, and dynamic creep and wheel track tests on asphalt mix were performed to assess rutting performance. The test and statistical analysis results indicated that nanoclay has considerably positive impact on rutting and elastic deformation of neat and SBR-modified asphalt binder and mixture.

Research on Fatigue Performance of Modified Asphalt Mixture in Intermediate Course of Pavement

2013 ◽  
Vol 423-426 ◽  
pp. 1063-1067 ◽  
Author(s):  
Zhao Hui Sun ◽  
Xiao Hong Wang ◽  
Guang Qiang Zhu ◽  
Pei Dong Ou ◽  
Jing Ma
Keyword(s):  
Design Method ◽  
Asphalt Mixture ◽  
Fatigue Performance ◽  
Mix Design ◽  
Control Mode ◽  
Bending Fatigue ◽  
Modified Asphalt ◽  
Bending Fatigue Test ◽  
Asphalt Mix ◽  
Beam Bending

Beam bending fatigue test was done by MTS810 using stress control mode, the double logarithm fatigue equations and Weibull fatigue equations of three types of modified asphalt mixtures for intermediate course under different design method are gained. Good performance of the modified asphalt mix design programs are choose to use in the Northeast region to explore the modified asphalt mix design method for the use of intermediate course through a comparative study of 3 types of modified asphalt mixture fatigue performance.

Evaluation of Asphalt Mixture Performance Using Cracking and Durability Tests at a Full-Scale Pavement Facility

2021 ◽  
pp. 036119812110218
Author(s):  
Amir Golalipour ◽  
Varun Veginati ◽  
David J. Mensching
Keyword(s):  
Performance Test ◽  
Asphalt Mixture ◽  
Performance Testing ◽  
Field Performance ◽  
Optimization Procedure ◽  
Cyclic Fatigue ◽  
Intermediate Temperature ◽  
Index Test ◽  
Reclaimed Asphalt ◽  
Indirect Tensile

In the asphalt materials community, the most critical research need is centered around a paradigm shift in mixture design from the volumetric process of the previous 20-plus years to an optimization procedure based on laboratory-measured mechanical properties that should lead to an increase in long-term pavement performance. This study is focused on advancing the state of understanding with respect to the value of intermediate temperature cracking tests, which may be included in a balanced mix design. The materials included are plant-mixed, laboratory-compacted specimens reheated from the 2013 Federal Highway Administration’s (FHWA’s) Accelerated Loading Facility (ALF) study on reclaimed asphalt pavement/reclaimed asphalt shingle (RAP/RAS) materials. Six commonly discussed intermediate temperature (cracking and durability) performance testing (i.e., Asphalt Mixture Performance Tester [AMPT] Cyclic Fatigue, Cantabro, Illinois Flexibility Index Test [I-FIT], Indirect Tensile Cracking [ITC, also known as IDEAL-CT], Indirect Tensile Nflex, and Texas Overlay Test) were selected for use in this study based on input from stakeholders. Test results were analyzed to compare differences between the cracking tests. In addition, statistical analyses were conducted to assess the separation among materials (lanes) for each performance test. Cyclic fatigue and IDEAL-CT tests showed the most promising results. The ranking from these two tests’ index parameters matched closely with ALF field performance. Furthermore, both showed reasonable variability of test data and they were successful in differentiating between different materials.

scholarly journals MECHANICAL PERFORMANCE OF ASPHALT MIXTURE CONTAINING CUP LUMP RUBBER

2019 ◽  
Vol 81 (6) ◽  
Author(s):  
Norfazira Mohd Azahar ◽  
Norhidayah Abdul Hassan ◽  
Ramadhansyah Putra Jaya ◽  
Hasanan Md. Nor ◽  
Mohd Khairul Idham Mohd Satar ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Resilient Modulus ◽  
Permanent Deformation ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Dynamic Creep ◽  
Aging Conditions ◽  
Public Work Department ◽  
Indirect Tensile

The use of cup lump rubber as an additive in asphalt binder has recently become the main interest of the paving industry. The innovation helps to increase the natural rubber consumption and stabilize the rubber price. This study evaluates the mechanical performance of cup lump rubber modified asphalt (CMA) mixture in terms of resilient modulus, dynamic creep and indirect tensile strength under aging conditions. The CMA mixture was prepared using dense-graded Marshall-designed mix and the observed behavior was compared with that of conventional mixture. From the results, both mixtures passed the volumetric properties as accordance to Malaysian Public Work Department (PWD) specification. The addition of cup lump rubber provides better resistance against permanent deformation through the enhanced properties of resilient modulus and dynamic creep. Furthermore, the resilient modulus of CMA mixture performed better under aging conditions.  

Sign in / Sign up

Export Citation Format

Share Document