The Research of Corrected First Order Kinetics on Hydrolysis and Biogas Generation in Batch Anaerobic Digestion

In this work, for modelling the anaerobic digestion of microcrystalline cellulose, two surface-related models based on cylindrical and spherical particles were developed and compared with the first-order kinetics model. A unique dataset consisting of particles with different sizes, the same crystallinity and polymerisation degree was used to validate the models. Both newly developed models outperformed the first-order kinetics model. Analysis of the kinetic constant data revealed that particle size is a key factor determining the anaerobic digestion kinetics of crystalline cellulose. Hence, crystalline cellulose particle size should be considered in the development and optimization of lignocellulose pre-treatment methods. Further research is necessary for the assessment of impact of the crystalline cellulose particle size and surface properties on the microbial cellulose hydrolysis rate.

Download Full-text

Photo-catalytic degradation of gaseous pollutants in paper mills of southern China

TAPPI Journal ◽

10.32964/tj17.03.167 ◽

2018 ◽

Vol 17 (03) ◽

pp. 167-178 ◽

Cited By ~ 2

Author(s):

Xin Tong ◽

Jiao Li ◽

Jun Ma ◽

Xiaoquan Chen ◽

Wenhao Shen

Keyword(s):

Degradation Rate ◽

Southern China ◽

Catalytic Degradation ◽

Pulp And Paper ◽

Gaseous Pollutants ◽

Pulp And Paper Mills ◽

Paper Mills ◽

Initial Concentration ◽

First Order ◽

First Order Kinetics

Studies were undertaken to evaluate gaseous pollutants in workplace air within pulp and paper mills and to consider the effectiveness of photo-catalytic treatment of this air. Ambient air at 30 sampling sites in five pulp and paper mills of southern China were sampled and analyzed. The results revealed that formaldehyde and various benzene-based molecules were the main gaseous pollutants at these five mills. A photo-catalytic reactor system with titanium dioxide (TiO2) was developed and evaluated for degradation of formaldehyde, benzene and their mixtures. The experimental results demonstrated that both formaldehyde and benzene in their pure forms could be completely photo-catalytic degraded, though the degradation of benzene was much more difficult than that for formaldehyde. Study of the photo-catalytic degradation kinetics revealed that the degradation rate of formaldehyde increased with initial concentration fitting a first-order kinetics reaction. In contrast, the degradation rate of benzene had no relationship with initial concentration and degradation did not conform to first-order kinetics. The photo-catalytic degradation of formaldehyde-benzene mixtures indicated that formaldehyde behaved differently than when treated in its pure form. The degradation time was two times longer and the kinetics did not reflect a first-order reaction. The degradation of benzene was similar in both pure form and when mixed with formaldehyde.

Download Full-text

Kinetic of oxidation of methyl orange by vanadium(V) under conditions VO2+ and decavanadates coexist: Catalysis by Triton X-100 micellar medium

10.31221/osf.io/m9g7p ◽

2019 ◽

Author(s):

Chem Int

Keyword(s):

Methyl Orange ◽

Solution Ph ◽

Vanadium Concentration ◽

Limiting Behavior ◽

First Order ◽

First Order Kinetics ◽

Ph Range ◽

Kinetic Pattern ◽

Triton X ◽

Kinetics Of

The kinetics of oxidation of methyl orange by vanadium(V) {V(V)} has been investigated in the pH range 2.3-3.79. In this pH range V(V) exists both in the form of decavanadates and VO2+. The kinetic results are distinctly different from the results obtained for the same reaction in highly acidic solution (pH < 1) where V(V) exists only in the form of VO2+. The reaction obeys first order kinetics with respect to methyl orange but the rate has very little dependence on total vanadium concentration. The reaction is accelerated by H+ ion but the dependence of rate on [H+] is less than that corresponding to first order dependence. The equilibrium between decavanadates and VO2+ explains the different kinetic pattern observed in this pH range. The reaction is markedly accelerated by Triton X-100 micelles. The rate-[surfactant] profile shows a limiting behavior indicative of a unimolecular pathway in the micellar pseudophase.

Download Full-text

Biodegradation rates of aromatic contaminants in biofilm reactors

Water Science & Technology ◽

10.2166/wst.1995.0027 ◽

1995 ◽

Vol 31 (1) ◽

pp. 117-128 ◽

Cited By ~ 8

Author(s):

Jean-Pierre Arcangeli ◽

Erik Arvin

Keyword(s):

Aromatic Hydrocarbons ◽

Competitive Inhibition ◽

Removal Rate ◽

First Order ◽

Biofilm Reactors ◽

First Order Kinetics ◽

Reducing Conditions ◽

Low Concentrations ◽

Degradation Rates ◽

Order Surface

This study has shown that microorganisms can adapt to degrade mixtures of aromatic pollutants at relatively high rates in the μg/l concentration range. The biodegradation rates of the following compounds were investigated in biofilm systems: aromatic hydrocarbons, phenol, methylphenols, chlorophenols, nitrophenol, chlorobenzenes and aromatic nitrogen-, sulphur- or oxygen-containing heterocyclic compounds (NSO-compounds). Furthermore, a comparison with degradation rates observed for easily degradable organics is also presented. At concentrations below 20-100 μg/l the degradation of the aromatic compounds was typically controlled by first order kinetics. The first-order surface removal rate constants were surprisingly similar, ranging from 2 to 4 m/d. It appears that NSO-compounds inhibit the degradation of aromatic hydrocarbons, even at very low concentrations of NSO-compounds. Under nitrate-reducing conditions, toluene was easily biodegraded. The xylenes and ethylbenzene were degraded cometabolically if toluene was used as a primary carbon source; their removal was influenced by competitive inhibition with toluene. These interaction phenomena are discussed in this paper and a kinetic model taking into account cometabolism and competitive inhibition is proposed.

Download Full-text

In-vitro Kinetic Hydrolysis Study of Metronidazole Derivatives with Carvacrol and Eugenol Using Validated RP-HPLC Method

Current Pharmaceutical Analysis ◽

10.2174/1573412916999200529123151 ◽

2020 ◽

Vol 16 ◽

Author(s):

M. Alarjah

Keyword(s):

Half Life ◽

Hplc Method ◽

Hydrolysis Rate ◽

First Order ◽

First Order Kinetics ◽

Rp Hplc ◽

Pharmacokinetic Properties ◽

Pseudo First Order ◽

Kinetic Hydrolysis

Background: Prodrugs principle is widely used to improve the pharmacological and pharmacokinetic properties of some active drugs. Much effort was made to develop metronidazole prodrugs to enhance antibacterial activity and or to improve pharmacokinetic properties of the molecule or to lower the adverse effects of metronidazole. Objective: In this work, the pharmacokinetic properties of some of monoterpenes and eugenol pro metronidazole molecules that were developed earlier were evaluated in-vitro. The kinetic hydrolysis rate constants and half-life time estimation of the new metronidazole derivatives were calculated using the validated RP-HPLC method. Method: Chromatographic analysis was done using Zorbbax Eclipse eXtra Dense Bonding (XDB)-C18 column of dimensions (250 mm, 4.6 mm, 5 μm), at ambient column temperature. The mobile phase was a mixture of sodium dihydrogen phosphate buffer of pH 4.5 and methanol in gradient elution, at 1ml/min flow rate. The method was fully validated according to the International Council for Harmonization (ICH) guidelines. The hydrolysis process carried out in an acidic buffer pH 1.2 and in an alkaline buffer pH 7.4 in a thermostatic bath at 37ºC. Results: The results followed pseudo-first-order kinetics. All metronidazole prodrugs were stable in the acidic pH, while they were hydrolysed in the alkaline buffer within a few hours (6-8 hr). The rate constant and half-life values were calculated, and their values were found to be 0.082- 0.117 hr-1 and 5.9- 8.5 hr., respectively. Conclusion: The developed method was accurate, sensitive, and selective for the prodrugs. For most of the prodrugs, the hydrolysis followed pseudo-first-order kinetics; the method might be utilised to conduct an in-vivo study for the metronidazole derivatives with monoterpenes and eugenol.

Download Full-text

Enhancing methane production from the invasive macroalga Rugulopteryx okamurae through anaerobic co-digestion with olive mill solid waste: process performance and kinetic analysis

Journal of Applied Phycology ◽

10.1007/s10811-021-02548-3 ◽

2021 ◽

Author(s):

D. de la Lama-Calvente ◽

M. J. Fernández-Rodríguez ◽

J. Llanos ◽

J. M. Mancilla-Leytón ◽

R. Borja

Keyword(s):

Anaerobic Digestion ◽

Solid Waste ◽

Methane Production ◽

Methane Yield ◽

Specific Rate ◽

Order Kinetic ◽

Two Phase ◽

First Order ◽

Olive Mill Solid Waste ◽

Olive Mill

AbstractThe biomass valorisation of the invasive brown alga Rugulopteryx okamurae (Dictyotales, Phaeophyceae) is key to curbing the expansion of this invasive macroalga which is generating tonnes of biomass on southern Spain beaches. As a feasible alternative for the biomass management, anaerobic co-digestion is proposed in this study. Although the anaerobic digestion of macroalgae barely produced 177 mL of CH4 g−1 VS, the co-digestion with a C-rich substrate, such as the olive mill solid waste (OMSW, the main waste derived from the two-phase olive oil manufacturing process), improved the anaerobic digestion process. The mixture improved not only the methane yield, but also its biodegradability. The highest biodegradability was found in the mixture 1 R. okamurae—1 OMSW, which improved the biodegradability of the macroalgae by 12.9% and 38.1% for the OMSW. The highest methane yield was observed for the mixture 1 R. okamurae—3 OMSW, improving the methane production of macroalgae alone by 157% and the OMSW methane production by 8.6%. Two mathematical models were used to fit the experimental data of methane production time with the aim of assessing the processes and obtaining the kinetic constants of the anaerobic co-digestion of different combination of R. okamurae and OMSW and both substrates independently. First-order kinetic and the transference function models allowed for appropriately fitting the experimental results of methane production with digestion time. The specific rate constant, k (first-order model) for the mixture 1 R. okamurae- 1.5 OMSW, was 5.1 and 1.3 times higher than that obtained for the mono-digestion of single OMSW and the macroalga, respectively. In the same way, the transference function model revealed that the maximum methane production rate (Rmax) was also found for the mixture 1 R. okamurae—1.5 OMSW (30.4 mL CH4 g−1 VS day−1), which was 1.6 and 2.2 times higher than the corresponding to the mono-digestions of the single OMSW and sole R. okamurae (18.9 and 13.6 mL CH4 g−1 VS day−1), respectively.

Download Full-text

Decomposition of 4,4'-(Diazoamino)-bis(5-methoxy-2-methylbenezenesulfonic Acid) in Solutions ofFD&C Red No. 40

Journal of AOAC INTERNATIONAL ◽

10.1093/jaoac/67.4.844 ◽

1984 ◽

Vol 67 (4) ◽

pp. 844-845

Author(s):

Naomi Richfield-Fratz

Keyword(s):

Liquid Chromatography ◽

Aqueous Solutions ◽

Borate Buffer ◽

Sodium Borate ◽

First Order ◽

First Order Kinetics ◽

Color Additive ◽

Sodium Borate Buffer

Abstract 4,4'-(Diazoamino)-bis(5-methoxy-2-methylbenzenesuIfonic acid), when present as a reaction by-product in FD&C Red No. 40, is shown to decompose rapidly in aqueous solutions of the color additive. The decomposition is halted by the addition of sodium borate buffer. Quantitationly liquid chromatography shows that decomposition is nonlinear with time and follows approximate first order kinetics.

Download Full-text

Comparative Study of Chemical Stability of Two H1Antihistaminic Drugs, Terfenadine and ItsIn VivoMetabolite Fexofenadine, Using LC-UV Methods

Journal of Analytical Methods in Chemistry ◽

10.1155/2019/5790404 ◽

2019 ◽

Vol 2019 ◽

pp. 1-10

Author(s):

Anna Gumieniczek ◽

Anna Berecka-Rycerz ◽

Rafał Pietraś ◽

Izabela Kozak ◽

Karolina Lejwoda ◽

...

Keyword(s):

Comparative Study ◽

Chemical Stability ◽

First Order ◽

First Order Kinetics ◽

Kinetics Of Degradation ◽

Effects Of Temperature ◽

High Doses ◽

Antihistaminic Drugs ◽

Kinetics Of

A comparative study of chemical stability of terfenadine (TER) and itsin vivometabolite fexofenadine (FEX) was performed. Both TER and FEX were subjected to high temperature at different pH and UV/VIS light at different pH and then quantitatively analyzed using new validated LC-UV methods. These methods were used to monitor the degradation processes and to determine the kinetics of degradation for both the compounds. As far as the effects of temperature and pH were concerned, FEX occurred more sensitive to degradation than TER. As far as the effects of UV/VIS light and pH were concerned, the both drugs were similarly sensitive to high doses of light. Using all stress conditions, the processes of degradation of TER and FEX followed the first-order kinetics. The results obtained for these two antihistaminic drugs could be helpful in developing their new derivatives with higher activity and stability at the same time.

Download Full-text