scholarly journals Assessment of Groundwater Quality of Agra District for the Irrigation Purpose

2017 ◽  
Vol 12 (1) ◽  
pp. 61-67 ◽  
Author(s):  
Vinod Kumar ◽  
Surjeet Singh ◽  
Gopal Krishan
Keyword(s):  
Groundwater Quality ◽  
Uttar Pradesh ◽  
Quality Parameters ◽  
Sodium Absorption ◽  
Residual Sodium Carbonate ◽  
Policy Makers ◽  
Sodium Absorption Ratio ◽  
Irrigation Purpose ◽  
Total Dissolved Solid

Groundwater quality of Agra district has been assessed considering twelve water quality parameters viz. pH, electrical conductivity (EC), total dissolved solid (TDS), chloride (Clˉ), bicarbonate (HCO3ˉ), sulfate (SO4²ˉ), silicon (Si), iron (Fe), aluminium (Al), calcium (Ca⁺⁺), magnesium (Mg⁺⁺) and sodium (Na⁺). Data on groundwater quality of fifteen blocks of the Agra district were collected for nine years (2006-2014) from the Ground Water Department, Government of Uttar Pradesh. The data are investigated using Wilcox and Piper diagrams with the help of Aquachem 2011.1 software. The assessment on suitability of groundwater quality for the irrigation purpose is done using sodium percentage (Na%), Sodium Absorption Ratio (SAR) and Residual Sodium Carbonate (RSC) for all the blocks. The results show that groundwater of various blocks of Agra district is of Na⁺- Clˉ, Ca2⁺- Na⁺- HCO3ˉ, Ca²+ - Mg²+ - Clˉ, Ca²+ - HCO3ˉ, Ca²+ - Clˉ, Na⁺- CIˉ, Ca²+ - Mg²+ - Clˉ - SO4²ˉ and Ca²+ - Na+ - HCO3ˉ type. It is also found that the groundwater quality of the blocks Barauli Ahir, Fatehapur Sikari, Saiyan, Achhnera, Shamsabad, Khandouli, Pinahat, Jaitpur Kalan and Bah falls under very good to medium category and can be used for the irrigation purpose. However, the groundwater quality for the blocks Bichpuri, Akola, Fatehabad, Khairagarh, Etmadpur and Jagner falls under Medium to very bad category and hence cannot be used for the irrigation purpose. The outcome of the study would be helpful to the farmers, policy makers and water management authorities in planning and management of irrigation water.

scholarly journals Prospects of groundwater quality for irrigation in central tracts of Lalitpur region, Uttar Pradesh, India

2000 ◽  
Vol 21 ◽  
Author(s):  
A. L. Haldar ◽  
P. Dev
Keyword(s):  
Uttar Pradesh ◽  
Sodium Absorption ◽  
Permeability Index ◽  
High Permeability ◽  
Sodium Absorption Ratio ◽  
Major Cations ◽  
Groundwater Samples ◽  
Dug Well ◽  
Well Waters

The quality of selected bored well and dug well waters from the central tracts of the Lalitpur region in the state of Uttar Pradesh, India, was investigated for irrigation purposes.  The study area is situated within the latitudes 24° 35' N and 24° 43' N, and the longitudes 78° 20' 41" E and 78° 30' E in the basin of the Shahzad River, which is a tributary of the Betwa River. Granites and gneisses of Archaean age are exposed in various parts of the area. The selected groundwater samples were analysed for major cations, anions, trace elements, pH, electrical conductivity (EC), sodium absorption ratio (SAR), residual sodium carbonate (RSC), permeability index (Pl), and sodium per cent (SP). The analysed data were plotted on Wilcox and U.S. salinity diagrams to evaluate chemical quality of groundwater for irrigation. The SAR values (ranging from 0.47 to 79) are within the permissible limits. A majority of samples (i.e., 57.5%) belong to C3-S, class whereas remaining samples (42.5%) fall in C2-S1 class. Plots of SP against EC indicate that a large number of samples (67.5%) fall within Excellent to Good type of water whereas remaining samples lie within Good to Permissible type. Hence the water can be used for all types of crop on soils of medium to high permeability.

scholarly journals Assessment of Water Quality for Irrigation Purpose: A Case Study of Bassi and Chaksu Tehsils, Jaipur District, Rajasthan, India

2020 ◽  
Author(s):  
Arjun Lal Meena ◽  
Priyanka Bisht
Keyword(s):  
Electrical Conductivity ◽  
Sodium Absorption ◽  
United States Department ◽  
Sodium Absorption Ratio ◽  
Absorption Ratio ◽  
Quality Of Water ◽  
Irrigation Purpose ◽  
Sodium Percentage ◽  
Kelly’S Ratio

Quality of Groundwater has assessed for irrigation purpose to get the suitability of water. Water samples has analysed by employing different parameters: Electrical Conductivity, Sodium Absorption Ratio (SAR), Soluble Sodium Percentage (SSP), Residual Sodium Carbonate (RSC), Kelly’s Ratio, Potential Salinity and Corrosive Ratio. Suitability of Water for irrigation has presented by the diagram based on the combination of Electrical Conductivity and Sodium Absorption Ratio suggested by United States Department of Agriculture (USDA). Livelihood of the study area depends on the Agriculture and allied activities so it becomes more important to analyse the quality of water for irrigation.Keywords: Irrigation, Electrical Conductivity, Sodium Absorption Ratio, Kelly’s Ratio, Soluble Sodium Percentage.

scholarly journals Classification of groundwater suitability for irrigation purposes using a comprehensive approach based on the AHP and GIS techniques in North Kurdufan Province, Sudan

2021 ◽  
Vol 11 (7) ◽  
Author(s):  
Elsiddig Eldaw ◽  
Tao Huang ◽  
Adam Khalifa Mohamed ◽  
Yahaya Mahama
Keyword(s):  
Water Quality ◽  
Spatial Distribution ◽  
Groundwater Quality ◽  
Irrigation Water ◽  
Research Effort ◽  
Sodium Absorption ◽  
Irrigation Water Quality ◽  
Middle Income ◽  
Sodium Absorption Ratio ◽  
Deep Aquifers

AbstractDeterioration of groundwater quality due to drastic human interventions is rising at an alarming rate particularly in lower- and middle-income countries. Yet, limited research effort has been devoted to monitoring and ascertaining groundwater quality. The present study develops a comprehensive irrigation water quality index (IWQI) for rating water quality of shallow and deep aquifers in North Kurdufan province, Sudan. The new approach is developed to overcome the deficiencies of the existing irrigation indices and coming up with a unified decision for classifying water quality for irrigation purposes. Because of these indices like permeability index (PI), sodium absorption ratio (SAR), etc., depending on specific elements, entirely subjective, as well as the great variations in their results, particularly when classifying water quality. Thus, IWQI is created based on eight indices that are generally used to evaluate irrigation water quality, plus three physicochemical parameters have been proven an impact on water quality. The analytic hierarchy process (AHP) is applied to minimize the subjectivity at assign parameter weights under multiple criteria decision analysis tools (MCDA). The spatial distribution of IWQI agrees with the spatial distribution of the most parameters. The results of our approach reveal that the majority of samples are suitable for irrigation uses for both aquifers except few wells in the confined aquifer. Also, noted that there are very variations in the irrigation indices results for classifying water quality. The comparison result showed that the new index robust, fair calculations and has best classifying of water quality.

scholarly journals Hydrochemical assessment of water quality for irrigation: A case study of the wetland complex of Guerbes-Sanhadja, North-East of Algeria

2018 ◽  
Vol 38 (1) ◽  
pp. 43-52 ◽  
Author(s):  
Sihem Hedjal ◽  
Derradji Zouini ◽  
Abdelwaheb Benamara
Keyword(s):  
Water Quality ◽  
Quality Parameters ◽  
Irrigated Agriculture ◽  
Sodium Absorption ◽  
Sodium Absorption Ratio ◽  
North East ◽  
The Status ◽  
Wetland Complex ◽  
Eastern Algeria ◽  
Irrigation Quality

AbstractThe wetland complex of Guerbes-Sanhadja (north-eastern Algeria), has experienced in recent years a certain economic expansion, particularly agricultural, about 47% of the useful agricultural area marked by several varieties of crops ranging from market gardening to speculative crops, requiring large quantities of water for irrigation purposes, however the swampy areas are the main sources used for irrigation purposes in this practice. It is therefore necessary for this water to have physicochemical properties adapted to plants, in particular the absence of salinity. This study was done to evaluate the status of the swamps areas quality and its suitability for irrigated agriculture. To achieve this objective, water samples from ten swamps areas water were collected from Guerbes-Sanhadja in February and June of 2016. The water quality of these swamps was estimated from different water quality parameters such as pH and electrical conductivity (EC), the chemical parameters like Na+, K+, Ca2+, HCO3−, SO42−, Cl−, BOD5, NO3−, NO2−, NH4+ and PO43−. Based on the physico-chemical analyses, irrigation quality parameters like sodium absorption ratio (SAR), percent sodium (% Na), residual sodium carbonate (RSC), permeability index (PI), magnesium hazard (MH) were calculated. The results showed that the overall concentration of nitrate was very high. About 60 percent of the swampy areas had suitable water quality for chloride, and they had a concentration below the permissible limit for crop irrigation. From the Richards diagram, it is observed that most of the samples from the study area fall in the good to permissible classes for irrigation purpose.

scholarly journals An Integrated Use of GIS, Geostatistical and Map Overlay Techniques for Spatio-Temporal Variability Analysis of Groundwater Quality and Level in the Punjab Province of Pakistan, South Asia

Water ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3555
Author(s):  
Huzaifa Shahzad ◽  
Hafiz Umar Farid ◽  
Zahid Mahmood Khan ◽  
Muhammad Naveed Anjum ◽  
Ijaz Ahmad ◽  
...  
Keyword(s):  
Groundwater Quality ◽  
Groundwater Level ◽  
Management Practices ◽  
Quality Parameters ◽  
Sodium Absorption ◽  
Distribution Analysis ◽  
East Part ◽  
Post Monsoon ◽  
Spatio Temporal ◽  
Lower South

The rapidly changing climatic scenario is demanding periodic evaluation of groundwater quality at the temporal and spatial scale in any region for its effectual management. The statistical, geographic information system (GIS), geostatistical, and map overlay approaches were applied for investigating the spatio-temporal variation in groundwater quality and level data of 242 monitoring wells in Punjab, Pakistan during pre-monsoon and post-monsoon seasons of the years 2015 and 2016. The analysis indicated the higher variation in data for both the seasons (pre-monsoon and post-monsoon) as coefficient of variation (CV) values were found in the range of 84–175% for groundwater quality parameters. Based on the t-test values, the marginal improvement in groundwater electrical conductivity (EC), sodium absorption ratio (SAR) and residual sodium carbonate (RSC) and decrease in groundwater level (GWL) were observed in 2016 as compared to 2015 (p = 0.05). The spatial distribution analysis of groundwater EC, SAR and RSC indicated that the groundwater quality was unfit for irrigation in the lower south-east part of the study area. The groundwater level (GWL) was also higher in that part of the study area during the pre-monsoon and post-monsoon seasons in 2015 and 2016. The overlay analysis also indicated that the groundwater EC, RSC and GWL values were higher in south-east parts of the study area during pre-monsoon and post-monsoon seasons of 2015 and 2016. Hence, there is an instant need to apply groundwater management practices in the rest of the region (especially in the lower south-east part) to overcome the future degradation of groundwater quality.

scholarly journals Spatial Evaluation of Groundwater Quality Using GIS and WQI in Gadilam River Basin, Tamil Nadu, India

2021 ◽  
Vol 30 (3) ◽  
pp. 546-561
Author(s):  
K. Mohammed Rizwan ◽  
V. Thirukumaran ◽  
M. Suresh
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
River Basin ◽  
Quality Index ◽  
Tamil Nadu ◽  
Interpolation Method ◽  
Quality Parameters ◽  
Groundwater Samples ◽  
Spatial Interpolation Method

The aims of the current research are to assess the drinking water quality of the groundwater in the Gadilam River Basin, which is located in the northern part of Tamil Nadu, by identifying the groundwater quality index and examine its suitability for drinking. The current work determines the levels of groundwater quality parameters based on 120 groundwater samples; 50 samples from Archaean formation, 34 samples from Quaternary formation, 35 samples from Tertiary formation and the remaining sample from Cretaceous formation. Additionally, this research compares the determined levels with the various standards for drinking. Furthermore, the variability of parameters of the groundwater quality is explored in this paper by using the spatial interpolation method. The conclusion of this research reveals that the groundwater quality parameters such as Calcium (Ca2+), Magnesium (Mg2+), Nitrate (NO32-), Fluoride (F-), Sulphate (SO42-), Bi-carbonate (HCO3-) and Percentage of Hydrogen (pH) values are observed to be within the limiting value for WHO 2017 in all the formations during the seasons in which they were taken. The water quality index (WQI) values of the Archaean, Quaternary and Tertiary formations are found to be less than 100 meq/L in all stations in both seasons. In order of WQI, these stations come under the category of “Excellent” and “Good”. The Piper trilinear classification of groundwater samples fall in the field of mixed Ca-Mg-Cl, and No dominance, some of the samples represent Na-K, Cl types of water.

scholarly journals Groundwater Quality of Coastal Aquifer Evaluation Using Spatial Analysis Approach

2018 ◽  
Vol 34 (6) ◽  
pp. 2902-2912
Author(s):  
J. Saravanan ◽  
Kishan Singh Rawat ◽  
Sudhir Kumar Singh
Keyword(s):  
Groundwater Quality ◽  
Spatial Data ◽  
Tamil Nadu ◽  
Research Work ◽  
Quality Parameters ◽  
World Health ◽  
Entire Study ◽  
Groundwater Samples ◽  
Health Organization

Groundwater quality of Thiruvallur (district of Tamil Nadu) of coastal areas of the Bay of Bengal has been studied. Standard overlay analysis; techniques have been used for analyzing spatial data in Geographic Information System platform. For this research work, groundwater samples were collected from bore wells and open wells covering the whole study area. The collected samples were analyzed for physical, cations and anions. The thematic maps of groundwater quality parameters of the entire study area were prepared using Inverse Distance Weightage interpolation technique. Further, water quality index was computed for the region on a recommendation of standard permissible limitsrecommended by World Health Organization (WHO) 2006 for the suitability of groundwater for drinking purposes.

Sign in / Sign up

Export Citation Format

Share Document