Nonlinear response of r.c. framed buildings retrofitted by different base-isolation systems under horizontal and vertical components of near-fault earthquakes

2017 ◽  
Vol 12 (1) ◽  
pp. 135-144 ◽  
Author(s):  
Fabio Mazza ◽  
Mirko Mazza ◽  
Alfonso Vulcano
Keyword(s):  
Nonlinear Response ◽  
Base Isolation ◽  
Near Fault ◽  
Isolation Systems ◽  
Near Fault Earthquakes

Base Isolation Systems Employing Variable Friction Dampers Based on a STFT Controller

2011 ◽  
Vol 90-93 ◽  
pp. 1566-1575
Author(s):  
Zi Shu Dai
Keyword(s):  
Base Isolation ◽  
Isolation System ◽  
Friction Dampers ◽  
Near Fault ◽  
Active Isolation ◽  
Variable Friction ◽  
Isolation Systems ◽  
Near Fault Earthquakes ◽  
Rubber Bearings ◽  
Short Time

Conventional isolation systems may induce an excessive response in near-fault earthquakes. A new short time Fourier transformation (STFT) control algorithm for variable friction dampers (VFD) is developed to improve the performance of base isolation buildings in near-fault earthquakes. The STFT controller varies the clamping force in the VFD damper to achieve the response reduction. In addition, the STFT algorithm is implemented analytically on a multi degree of freedom system (MDOF) with laminated rubber bearings and variable friction dampers in Simulink environment. Three types of earthquakes representing a wide variety of ground motions are considered as the ground excitations in the simulation. The numerical show that, compared with conventional isolation systems, the semi-active isolation system controlled by the STFT algorithm can reduce the excessive response in near-fault earthquakes effectively.

scholarly journals Influence of Elastomeric Bearings in Tension on the Seismic Performance of Base-Isolated r.c. Buildings

2020 ◽  
Vol 11 (1) ◽  
pp. 82
Author(s):  
Fabio Mazza ◽  
Mirko Mazza
Keyword(s):  
Base Isolation ◽  
Nonlinear Models ◽  
Vertical Component ◽  
Computer Code ◽  
Nonlinear Phenomena ◽  
Isolation System ◽  
Elastomeric Bearings ◽  
Near Fault ◽  
Base Isolation System ◽  
Near Fault Earthquakes

Elastomeric bearings are commonly used in base-isolation systems to protect the structures from earthquake damages. Their design is usually developed by using nonlinear models where only the effects of shear and compressive loads are considered, but uncertainties still remain about consequences of the tensile loads produced by severe earthquakes like the near-fault ones. The present work aims to highlight the relapses of tension on the response of bearings and superstructure. To this end, three-, seven- and ten-storey r.c. framed buildings are designed in line with the current Italian seismic code, with a base-isolation system constituted of High-Damping-Rubber Bearings (HDRBs) designed for three values of the ratio between the vertical and horizontal stiffnesses. Experimental and analytical results available in literature are used to propose a unified nonlinear model of the HDRBs, including cavitation and post-cavitation of the elastomer. Nonlinear incremental dynamic analyses of the test structures are carried out using a homemade computer code, where other models of HDRBs considering only some nonlinear phenomena are implemented. Near-fault earthquakes with comparable horizontal and vertical components, prevailing horizontal component and prevailing vertical component are considered as seismic input. Numerical results highlight that a precautionary estimation of response parameters of the HDRBs is attained referring to the proposed model, while its effects on the nonlinear response of the superstructure are less conservative.

Failure Mechanism of Reinforced Concrete Rib Arch Bridge under Near-Fault Earthquakes

2011 ◽  
Vol 90-93 ◽  
pp. 940-945
Author(s):  
Wen Jun Gao ◽  
Guang Wu Tang ◽  
Yi Da Kong
Keyword(s):  
Reinforced Concrete ◽  
Nonlinear Response ◽  
Plastic Hinge ◽  
Seismic Damage ◽  
Arch Bridge ◽  
2008 Wenchuan Earthquake ◽  
Near Fault ◽  
Pulse Type ◽  
Near Fault Earthquakes ◽  
Far Fault

A typical reinforced concrete rib arch bridge was chosen to investigate its nonlinear response to near-fault ground motions recorded in 2008 Wenchuan earthquake. Results showed that significant seismic damage may occur, maximum demands were higher for near-fault records having forward directive than far-fault motions, and the rotational capacity of rib plastic hinge is not enough for the large compression force of arch rib. While backward-directivity motions, typically do not exhibit pulse-type motions, only have medium seismic damage to the arch bridge.

Performance of bi-directional elliptical rolling rods for base isolation of buildings under near-fault earthquakes

2017 ◽  
Vol 21 (5) ◽  
pp. 675-693 ◽  
Author(s):  
Aruna Rawat ◽  
Naseef Ummer ◽  
Vasant Matsagar
Keyword(s):  
Base Isolation ◽  
Ground Motions ◽  
Frictional Resistance ◽  
Curved Surface ◽  
Isolation System ◽  
Near Fault ◽  
Earthquake Ground Motions ◽  
Base Isolation System ◽  
Near Fault Earthquakes ◽  
Storey Building

Rolling base isolation system provides effective isolation to the structures from seismic base excitations by virtue of its low frictional resistance. Herein, dynamic analysis of flexible-shear type multi-storey building mounted on orthogonally placed elliptical rolling rod base isolation systems subjected to bi-directional components of near-fault earthquake ground motions is presented. The orthogonally placed rods would make it possible to resist the earthquake forces induced in the structure in both the horizontal directions. The curved surface of these elliptical rods has a self-restoring capability due to which the magnitude of peak isolator displacement and residual displacement is reduced. The roughness of the tempered curved surface of the rollers dissipates energy in motion due to frictional damping. The seismic performance of the multi-storey building mounted on the elliptical rolling rod base isolation system is compared with that mounted on the sliding pure-friction and cylindrical rolling rod systems. Parametric studies are conducted to examine the behavior of the building for different superstructure flexibilities, eccentricities of the elliptical rod, and coefficients of friction. It is concluded that the elliptical rolling rod base isolation system is effective in mitigation of damaging effects of the near-fault earthquake ground motions in the multi-storey buildings. Even under the near-fault earthquake ground motions, the base-isolated building mounted on the elliptical rolling rods shows considerable reduction in seismic response. The isolator displacement with the elliptical rolling rod base isolation system is less in comparison to the pure-friction and cylindrical rolling rod systems.

SEISMIC CAPACITY OF MEDIUM SIZE CONTINUOUS BRIDGES WITH LEAD-RUBBER BEARINGS

2019 ◽  
Vol 3 (Special Issue on First SACEE'19) ◽  
pp. 199-206
Author(s):  
Bertha Olmos ◽  
José Jara ◽  
José Luis Fabián
Keyword(s):  
Seismic Performance ◽  
Seismic Vulnerability ◽  
Base Isolation ◽  
Elastic Behaviour ◽  
Medium Size ◽  
Nonlinear Behaviour ◽  
Seismic Capacity ◽  
Damage Scenarios ◽  
Isolation Systems ◽  
Rubber Bearings

This paper investigates the effects of the nonlinear behaviour of isolation pads on the seismic capacity of bridges to identify the parameters of base isolation systems that can be used to improve seismic performance of bridges. A parametric study was conducted by designing a set of bridges for three different soil types and varying the number of spans, span lengths, and pier heights. The seismic responses (acceleration, displacement and pier seismic forces) were evaluated for two structural models. The first model corresponded to the bridges supported on elastomeric bearings with linear elastic behaviour and the second model simulated a base isolated bridge that accounts for the nonlinear behaviour of the system. The seismic demand was represented with a group of twelve real accelerograms recorded on the subduction zone on the Pacific Coast of Mexico. The nonlinear responses under different damage scenarios for the bridges included in the presented study were estimated. These results allow determining the seismic capacity of the bridges with and without base isolation. Results show clearly the importance of considering the nonlinear behaviour on the seismic performance of bridges and the influence of base isolation on the seismic vulnerability of medium size bridges.

Sign in / Sign up

Export Citation Format

Share Document