2414 Effect of Tip Clearance Flow on a Modal-Type Stall Inception in a Variable-Pitch Axial-Flow Fan

2006 ◽  
Vol 2006.2 (0) ◽  
pp. 147-148
Author(s):  
Takahiro NISHIOKA ◽  
Toshio KANNO
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Axial Flow Fan ◽  
Variable Pitch ◽  
Stall Inception ◽  
Tip Clearance Flow ◽  
Clearance Flow ◽  
Modal Type

An Experimental and Computational Investigation of Tip Clearance Flow and Its Impact on Stall Inception

2010 ◽  
Author(s):  
Matthew A. Bennington ◽  
Mark H. Ross ◽  
Joshua D. Cameron ◽  
Scott C. Morris ◽  
Juan Du ◽  
...  
Keyword(s):  
Axial Compressor ◽  
Axial Flow ◽  
Leading Edge ◽  
Tip Clearance ◽  
Flow Coefficient ◽  
Momentum Balance ◽  
Tip Leakage Flow ◽  
Stall Inception ◽  
Tip Clearance Flow ◽  
Clearance Flow

A numerical and experimental study was conducted to investigate the tip clearance flow and its relationship to stall in a transonic axial compressor. The CFD results were used to identify the existence of an interface between incoming axial flow and the reverse tip clearance flow. A surface streaking method was used to experimentally identify this interface as a line of zero axial shear stress at the casing. The position of this line, denoted xzs, moved upstream with decreasing flow coefficient in both the experiments and computations. The line was found to be at the rotor leading edge plane when the compressor stalled. Further measurements using rotor offset and inlet distortion further corroborated these results, and demonstrated that the movement of the interface upstream of the leading edge leads to the generation of rotating (“spike”) disturbances. Stall was therefore interpreted to occur as a result of a critical momentum balance between the approach fluid and the tip-leakage flow.

Numerical Simulation of the Effect of the Tip Clearance Flow on Rotor-Stator Interaction Tone Noise in Axial-Flow Fan

2020 ◽  
Author(s):  
Wang Liangfeng ◽  
Xiang Kangshen ◽  
Mao Luqin ◽  
Tong Hang ◽  
Qiao Weiyang
Keyword(s):  
Numerical Simulation ◽  
Power Level ◽  
Axial Flow ◽  
Leading Edge ◽  
Tip Clearance ◽  
Axial Flow Fan ◽  
Sound Sources ◽  
Tip Clearance Flow ◽  
Clearance Flow ◽  
Rotor Stator Interaction

Abstract The present study is focused on the sound generation due to the rotor tip clearance flow interaction with stator in an axial flow fan. A hybrid URANS/Goldstein’s equations method is applied to calculate the unsteady flow and tone noise in a high loaded axial-flow fan with different rotor tip clearance. The numerical simulation results show that the main sound sources of fan tip clearance tone noise are concentrated in the leading edge of downstream stator blades. It is found that when the rotor tip clearance increases from zero to 2.5 mm (0.94% relative blade height), the mass flow of the fan decreases by about 2% and the efficiency of the fan decreases by about 1 percentage, and the sound power level at 1BPF forward tone increases by 1.47dB, and that of backward tone increases by 0.65dB. However, the influence of tip clearance on the tone noise intensity at 2BPF and 3BPF is more complex, and the variation range is less than 1dB. It is found that the wake width and wake strength at the rotor exit increase with the increase of tip clearance. The tip secondary flow caused by rotor clearance seriously affects the circumferential inhomogeneity of stator leading edge inflow conditions.

Tip Clearance Flow Induced Endwall Boundary Layer Separation in a Single–Stage Axial–Flow Low–Speed Compressor

2000 ◽  
Author(s):  
Horst Saathoff ◽  
Udo Stark
Keyword(s):  
Axial Flow ◽  
Boundary Layer Separation ◽  
Single Stage ◽  
Tip Clearance ◽  
Compressor Cascade ◽  
Tip Clearance Flow ◽  
Low Speed ◽  
Pressure Distributions ◽  
Oil Flow ◽  
Clearance Flow

The paper describes an investigation of the overtip end-wall flow in a single–stage axial–flow low–speed compressor utilizing an oil flow technique and a periodic multisampling pressure measurement technique. Representative oil flow pictures and ensemble averaged casingwall pressure distributions with standard deviations — supplemented by selected endwall oil flow pictures from a corresponding 2D compressor cascade — are shown and carefully analysed. The results enable the key features of the overtip endwall flow to be identified and changes with flow rate — or inlet angle — to be determined.

A Method for the Calculation of the Tip Clearance Flow Effects in Axial Flow Compressors: Part II — Calculation Procedure

1993 ◽  
Author(s):  
I. K. Nikolos ◽  
D. I. Douvikas ◽  
K. D. Papailiou
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Tip Clearance Flow ◽  
Vorticity Distribution ◽  
Clearance Flow ◽  
Calculation Results ◽  
Flow Effects ◽  
Set Up ◽  
Induced Velocity ◽  
Theoretical Procedure

An algorithm was set up for the implementation of the tip clearance models, described in Part I, in a secondary flow calculation method. A complete theoretical procedure was, thus, developed, which calculates the circumferentially averaged flow quantities and their radial variation due to the tip clearance effects. The calculation takes place in successive planes, where a Poisson equation is solved in order to provide the kinematic field. The self induced velocity is used for the positioning of the leakage vortex and a diffusion model is adopted for the vorticity distribution. The calculated pressure deficit due to the vortex presence is used, through an iterative procedure, in order to modify the pressure difference in the tip region. The method of implementation and the corresponding algorithm are described in this part of the paper and calculation results are compared to experimental ones for cascades and single rotors. The agreement between theory and experiment is good.

Numerical Investigations of the Coupled Flow Through a Subsonic Compressor Rotor and Axial Skewed Slot

2008 ◽  
Vol 131 (1) ◽  
Author(s):  
Xingen Lu ◽  
Wuli Chu ◽  
Junqiang Zhu ◽  
Yangfeng Zhang
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Stall Margin ◽  
Tip Clearance Flow ◽  
Casing Treatment ◽  
Axial Flow Compressor ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Flow Through ◽  
Flow Compressor

In order to advance the understanding of the fundamental mechanisms of axial skewed slot casing treatment and their effects on the subsonic axial-flow compressor flow field, the coupled unsteady flow through a subsonic compressor rotor and the axial skewed slot was simulated with a state-of-the-art multiblock flow solver. The computational results were first compared with available measured data, that showed the numerical procedure calculates the overall effect of the axial skewed slot correctly. Then, the numerically obtained flow fields were interrogated to identify the physical mechanism responsible for improvement in stall margin of a modern subsonic axial-flow compressor rotor due to the discrete skewed slots. It was found that the axial skewed slot casing treatment can increase the stall margin of subsonic compressor by repositioning of the tip clearance flow trajectory further toward the trailing of the blade passage and retarding the movement of the incoming∕tip clearance flow interface toward the rotor leading edge plane.

Methods of Predicting the Tip Clearance Effects in Axial Flow Turbomachinery

1970 ◽  
Vol 92 (3) ◽  
pp. 467-480 ◽  
Author(s):  
B. Lakshminarayana
Keyword(s):  
Axial Flow ◽  
Tip Clearance ◽  
Theoretical Treatment ◽  
Tip Clearance Flow ◽  
Pressure Losses ◽  
Clearance Flow ◽  
Alternate Model ◽  
Fundamental Physical ◽  
Stage Efficiency ◽  
Physical Principles

Using the author’s earlier flow model for the tip clearance flow, an expression is derived for the decrease in stage efficiency due to tip clearance. The analysis which includes all the dominant flow and blade parameters that affect the flow in the clearance region is compatible with fundamental physical principles, though not precise mathematically. The predictions agree closely with several compressor, fan, pump, and turbine data available. An alternate model which takes into account the presence of the vortex core is proposed. The theoretical treatment of the flow, more complete than hitherto available, predicts blade-to-blade variation in outlet angles accurately and stagnation pressure losses qualitatively. The predictions are compared with various experimental data available in the literature.

Physics of Tip Clearance Flow in Turbomachinery (Keynote Paper)

2002 ◽  
Author(s):  
Masahiro Inoue ◽  
Masato Furukawa
Keyword(s):  
Flow Field ◽  
Physical Interpretation ◽  
Vortex Core ◽  
Vortical Structure ◽  
Three Dimensional ◽  
Axial Flow ◽  
Tip Clearance ◽  
Tip Clearance Flow ◽  
Clearance Flow ◽  
Flow Phenomena

In a recent advanced aerodynamic design of turbomachinery, the physical interpretation of three-dimensional flow field obtained by a numerical simulation is important for iterative modifications of the blade or impeller geometry. This paper describes an approach to the physical interpretation of the tip clearance flow in turbomachinery. First, typical flow phenomena of the tip clearance flow are outlined for axial and radial compressors, pumps and turbines to help comprehensive understanding of the tip clearance flow. Then, a vortex-core identification method which enables to extract the vortical structure from the complicated flow field is introduced, since elucidation of the vortical structure is essential to the physical interpretation of the tip clearance flow. By use of the vortex-core identification, some interesting phenomena of the tip clearance flows are interpreted, especially focussing on axial flow compressors.

An Experimental and Numerical Investigation Into the Mechanisms of Rotating Instability

2001 ◽  
Author(s):  
Joachim März ◽  
Chunill Hah ◽  
Wolfgang Neise
Keyword(s):  
Experimental Study ◽  
Numerical Investigation ◽  
Axial Flow ◽  
Rotating Stall ◽  
Tip Clearance ◽  
Stable Mode ◽  
Tip Clearance Flow ◽  
Double Phase ◽  
Clearance Flow ◽  
Rotating Instability

This paper reports on an experimental and numerical investigation aimed at understanding the mechanisms of rotating instabilities in a low speed axial flow compressor. The phenomena of rotating instabilities in the current compressor were first identified with an experimental study. Then, an unsteady numerical method was applied to confirm the phenomena and to interrogate the physical mechanisms behind them. The experimental study was conducted with high-resolution pressure measurements at different clearances, employing a double phase-averaging technique. The numerical investigation was performed with an unsteady 3-D Navier-Stokes method that solves for the entire blade row. The current study reveals that a vortex structure forms near the leading edge plane. This vortex is the result of interactions among the classical tip-clearance flow, axially reversed endwall flow, and the incoming flow. The vortex travels from the suction side to the pressure side of the passage at roughly half of the rotor speed. The formation and movement of this vortex seem to be the main causes of unsteadiness when rotating instability develops. Due to the nature of this vortex, the classical tip-clearance flow does not spill over into the following blade passage. This behavior of the tip-clearance flow is why the compressor operates in a stable mode even with the rotating instability, unlike traditional rotating stall phenomena.

Sign in / Sign up

Export Citation Format

Share Document