321 Analysis of water contact angle on superhydrophobic surfaces

2008 ◽  
Vol 2008.8 (0) ◽  
pp. 41-42
Author(s):  
Ken YAMAMOTO ◽  
Satoshi OGATA
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Superhydrophobic Surfaces ◽  
Water Contact

Microsecond Laser Texturing of an Aerospace Grade Aluminum Alloy to Synthesize Superhydrophobic, Anti-Water Clogging Surfaces

2021 ◽  
Vol 875 ◽  
pp. 322-328
Author(s):  
Aneeqa Naeem ◽  
Esham Butt ◽  
Hamza Khawaja ◽  
Irfan Nadeem ◽  
Rehan Akhter ◽  
...  
Keyword(s):  
Contact Angle ◽  
Titanium Nitride ◽  
Water Contact Angle ◽  
Laser Pulses ◽  
Superhydrophobic Surfaces ◽  
Aluminum Surface ◽  
Laser Texturing ◽  
Water Contact ◽  
Line Separation ◽  
Aluminum Surfaces

Traditionally superhydrophobic surfaces are prepared by applying liquid repellant organic coatings or nano-based coatings. These superhydrophobic coatings are prone to wear and can be easily damaged by abrasion and cleaning. Recently researchers are switching interest to more efficient and promising technology of pulse laser texturing for engineering sub-micron topographies to have superhydrophobic surfaces. In this research, the micro-second Laser Pulses are used to feature sub-micron textures on titanium nitride coated aluminum and polished aluminum surfaces in order to achieve the water contact angle greater than 150°. Titanium nitride coated aluminum surface with scan line separation of 50 µm shows superior hydrophobicity having a water contact angle of 156º. These superhydrophobic aluminum surfaces have applications for anti-water clogging and anti-corrosion use.

Recent advances in corrosion resistant superhydrophobic coatings

2018 ◽  
Vol 36 (2) ◽  
pp. 127-153 ◽  
Author(s):  
Ahmed Bahgat Radwan ◽  
Aboubakr M. Abdullah ◽  
Nasser A. Alnuaimi
Keyword(s):  
Contact Angle ◽  
Surface Energy ◽  
Water Contact Angle ◽  
Metals And Alloys ◽  
Superhydrophobic Surfaces ◽  
Water Repellent ◽  
Water Contact ◽  
Corrosion Resistant ◽  
Superhydrophobic Coatings ◽  
Recent Advances

AbstractExtreme water-repellent (superhydrophobic) coatings with water contact angle higher than 150° have caught the attention of corrosion researchers in the last decade as they can be used to protect metals and alloys against corrosion. The latter is a serious problem, as it can threaten human lives in addition to its deleterious effects on the economy and environment. Superhydrophobic coatings (SHCs) can be achieved by lowering the surface energy of a certain coating through combining some of its surface features at the microscale and nanoscales. Although SHCs can be prepared using many different easy techniques, none, to the best of our knowledge, has been applied, so far, on an industrial scale for protection against corrosion of metals and alloys. The present work explains the different models of superhydrophobic surfaces (SHSs) and reviews their fabrication and processing methods with a focus on the recent advances in the corrosion protection of the SHC.

Long-Term Stable Metal Organic Framework (MOF) Based Mixed Matrix Membranes for Ultrafiltration

2020 ◽  
Author(s):  
Muayad Al-shaeli ◽  
Stefan J. D. Smith ◽  
Shanxue Jiang ◽  
Huanting Wang ◽  
Kaisong Zhang ◽  
...  
Keyword(s):  
Contact Angle ◽  
Water Contact Angle ◽  
Mixed Matrix Membranes ◽  
Recovery Ratio ◽  
Mixed Matrix ◽  
Water Contact ◽  
Membrane Performance ◽  
Metal Organic ◽  
Matrix Membranes

<p>In this study, novel <a>mixed matrix polyethersulfone (PES) membranes</a> were synthesized by using two different kinds of metal organic frameworks (MOFs), namely UiO-66 and UiO-66-NH<sub>2</sub>. The composite membranes were characterised by SEM, EDX, FTIR, PXRD, water contact angle, porosity, pore size, etc. Membrane performance was investigated by water permeation flux, flux recovery ratio, fouling resistance and anti-fouling performance. The stability test was also conducted for the prepared mixed matrix membranes. A higher reduction in the water contact angle was observed after adding both MOFs to the PES and sulfonated PES membranes compared to pristine PES membranes. An enhancement in membrane performance was observed by embedding the MOF into PES membrane matrix, which may be attributed to the super-hydrophilic porous structure of UiO-66-NH<sub>2</sub> nanoparticles and hydrophilic structure of UiO-66 nanoparticles that could accelerate the exchange rate between solvent and non-solvent during the phase inversion process. By adding the MOFs into PES matrix, the flux recovery ratio was increased greatly (more than 99% for most mixed matrix membranes). The mixed matrix membranes showed higher resistance to protein adsorption compared to pristine PES membranes. After immersing the membranes in water for 3 months, 6 months and 12 months, both MOFs were stable and retained their structure. This study indicates that UiO-66 and UiO-66-NH<sub>2</sub> are great candidates for designing long-term stable mixed matrix membranes with higher anti-fouling performance.</p>

scholarly journals Surface modification of PMMA polymer and its composites with PC61BM fullerene derivative using an atmospheric pressure microwave argon plasma sheet

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andrzej Sikora ◽  
Dariusz Czylkowski ◽  
Bartosz Hrycak ◽  
Magdalena Moczała-Dusanowska ◽  
Marcin Łapiński ◽  
...  
Keyword(s):  
Contact Angle ◽  
Surface Modification ◽  
Chemical Composition ◽  
Water Contact Angle ◽  
Plasma Sheet ◽  
Atmospheric Pressure ◽  
Argon Plasma ◽  
Fullerene Derivative ◽  
Water Contact ◽  
Pmma Polymer

AbstractThis paper presents the results of experimental investigations of the plasma surface modification of a poly(methyl methacrylate) (PMMA) polymer and PMMA composites with a [6,6]-phenyl-C61-butyric acid methyl ester fullerene derivative (PC61BM). An atmospheric pressure microwave (2.45 GHz) argon plasma sheet was used. The experimental parameters were: an argon (Ar) flow rate (up to 20 NL/min), microwave power (up to 530 W), number of plasma scans (up to 3) and, the kind of treated material. In order to assess the plasma effect, the possible changes in the wettability, roughness, chemical composition, and mechanical properties of the plasma-treated samples’ surfaces were evaluated by water contact angle goniometry (WCA), atomic force microscopy (AFM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The best result concerning the water contact angle reduction was from 83° to 29.7° for the PMMA material. The ageing studies of the PMMA plasma-modified surface showed long term (100 h) improved wettability. As a result of plasma treating, changes in the samples surface roughness parameters were observed, however their dependence on the number of plasma scans is irregular. The ATR-FTIR spectra of the PMMA plasma-treated surfaces showed only slight changes in comparison with the spectra of an untreated sample. The more significant differences were demonstrated by XPS measurements indicating the surface chemical composition changes after plasma treatment and revealing the oxygen to carbon ratio increase from 0.1 to 0.4.

scholarly journals Physicochemical Properties and Biocompatibility of Electrospun Polycaprolactone/Gelatin Nanofibers

2021 ◽  
Vol 18 (9) ◽  
pp. 4764
Author(s):  
Wei Lee Lim ◽  
Shiplu Roy Chowdhury ◽  
Min Hwei Ng ◽  
Jia Xian Law
Keyword(s):  
Contact Angle ◽  
Physicochemical Properties ◽  
Water Contact Angle ◽  
Ligament Injury ◽  
Great Promise ◽  
Composition Analysis ◽  
Water Contact ◽  
Tenogenic Differentiation ◽  
Good Biocompatibility ◽  
Tissue Grafts

Tissue-engineered substitutes have shown great promise as a potential replacement for current tissue grafts to treat tendon/ligament injury. Herein, we have fabricated aligned polycaprolactone (PCL) and gelatin (GT) nanofibers and further evaluated their physicochemical properties and biocompatibility. PCL and GT were mixed at a ratio of 100:0, 70:30, 50:50, 30:70, 0:100, and electrospun to generate aligned nanofibers. The PCL/GT nanofibers were assessed to determine the diameter, alignment, water contact angle, degradation, and surface chemical analysis. The effects on cells were evaluated through Wharton’s jelly-derived mesenchymal stem cell (WJ-MSC) viability, alignment and tenogenic differentiation. The PCL/GT nanofibers were aligned and had a mean fiber diameter within 200–800 nm. Increasing the GT concentration reduced the water contact angle of the nanofibers. GT nanofibers alone degraded fastest, observed only within 2 days. Chemical composition analysis confirmed the presence of PCL and GT in the nanofibers. The WJ-MSCs were aligned and remained viable after 7 days with the PCL/GT nanofibers. Additionally, the PCL/GT nanofibers supported tenogenic differentiation of WJ-MSCs. The fabricated PCL/GT nanofibers have a diameter that closely resembles the native tissue’s collagen fibrils and have good biocompatibility. Thus, our study demonstrated the suitability of PCL/GT nanofibers for tendon/ligament tissue engineering applications.

Sign in / Sign up

Export Citation Format

Share Document