scholarly journals A Review on Significance of Identifying an Appropriate Solid Form Duringdrug Discovery and Product Development

2021 ◽  
Vol 18 (2) ◽  
pp. 154-170
Author(s):  
Nishadh A. Patel

In recent years, solid form screening has become an integral and mandatory part of drug development. Solid form screening typically involves producing and characterizingmaximum possible solid forms of a potential drug candidate. Different types of solid forms for future drug product development includes salt screening, co-crystal screening, crystallization process development, polymorph screening as well as amorphous solid dispersion screening.Screening studies of a solid form is a set of carefully designed experiments that requires use of advanced analytical techniques to collect analytical data followed by a thoughtful data analysis.This solid form screening studies guide an important decision-making of lead solid form whichis likely to play a vital role during the pharmaceutical product development lifecycle. The selection criteria include pharmaceutically relevant properties, such as therapeutic efficacy and processing characteristics as well as role of physicochemical properties (i.e. solubility, dissolution rate, hygroscopicity, physical stability and chemical purity) in drug product development. A selected solid form, if thermodynamically unstable, it may undergo solid form changes upon exposure to environmental conditions such as temperature and relative humidity as well as manufacturing stress during the pharmaceutical unit operations. In thepresent work, fundamentals of solid form screening are discussed, including the experimental screening methodologies as well as characterization and analysis of solid forms. The importance of drug product risk assessment pertaining to the desired solid form are also discussed here.

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 889
Author(s):  
Kaijie Qian ◽  
Lorenzo Stella ◽  
David S. Jones ◽  
Gavin P. Andrews ◽  
Huachuan Du ◽  
...  

Among many methods to mitigate the solubility limitations of drug compounds, amorphous solid dispersion (ASD) is considered to be one of the most promising strategies to enhance the dissolution and bioavailability of poorly water-soluble drugs. The enhancement of ASD in the oral absorption of drugs has been mainly attributed to the high apparent drug solubility during the dissolution. In the last decade, with the implementations of new knowledge and advanced analytical techniques, a drug-rich transient metastable phase was frequently highlighted within the supersaturation stage of the ASD dissolution. The extended drug absorption and bioavailability enhancement may be attributed to the metastability of such drug-rich phases. In this paper, we have reviewed (i) the possible theory behind the formation and stabilization of such metastable drug-rich phases, with a focus on non-classical nucleation; (ii) the additional benefits of the ASD-induced drug-rich phases for bioavailability enhancements. It is envisaged that a greater understanding of the non-classical nucleation theory and its application on the ASD design might accelerate the drug product development process in the future.


Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4492
Author(s):  
Eric Ofosu Kissi ◽  
Robin Nilsson ◽  
Liebert Parreiras Nogueira ◽  
Anette Larsson ◽  
Ingunn Tho

Fused deposition modelling-based 3D printing of pharmaceutical products is facing challenges like brittleness and printability of the drug-loaded hot-melt extruded filament feedstock and stabilization of the solid-state form of the drug in the final product. The aim of this study was to investigate the influence of the drug load on printability and physical stability. The poor glass former naproxen (NAP) was hot-melt extruded with Kollidon® VA 64 at 10–30% w/w drug load. The extrudates (filaments) were characterised using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). It was confirmed that an amorphous solid dispersion was formed. A temperature profile was developed based on the results from TGA, DSC, and DMA and temperatures used for 3D printing were selected from the profile. The 3D-printed tablets were characterised using DSC, X-ray computer microtomography (XµCT), and X-ray powder diffraction (XRPD). From the DSC and XRPD analysis, it was found that the drug in the 3D-printed tablets (20 and 30% NAP) was amorphous and remained amorphous after 23 weeks of storage (room temperature (RT), 37% relative humidity (RH)). This shows that adjusting the drug ratio can modulate the brittleness and improve printability without compromising the physical stability of the amorphous solid dispersion.


Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1434
Author(s):  
Partha Pratim Das ◽  
Giulio Guzzinati ◽  
Catalina Coll ◽  
Alejandro Gomez Perez ◽  
Stavros Nicolopoulos ◽  
...  

Organic and biological compounds (especially those related to the pharmaceutical industry) have always been of great interest for researchers due to their importance for the development of new drugs to diagnose, cure, treat or prevent disease. As many new API (active pharmaceutical ingredients) and their polymorphs are in nanocrystalline or in amorphous form blended with amorphous polymeric matrix (known as amorphous solid dispersion—ASD), their structural identification and characterization at nm scale with conventional X-Ray/Raman/IR techniques becomes difficult. During any API synthesis/production or in the formulated drug product, impurities must be identified and characterized. Electron energy loss spectroscopy (EELS) at high energy resolution by transmission electron microscope (TEM) is expected to be a promising technique to screen and identify the different (organic) compounds used in a typical pharmaceutical or biological system and to detect any impurities present, if any, during the synthesis or formulation process. In this work, we propose the use of monochromated TEM-EELS, to analyze selected peptides and organic compounds and their polymorphs. In order to validate EELS for fingerprinting (in low loss/optical region) and by further correlation with advanced DFT, simulations were utilized.


2017 ◽  
Vol 142 ◽  
pp. 307-314 ◽  
Author(s):  
Brian W. Pack ◽  
Yelizaveta Babayan ◽  
Mark A. Schrad ◽  
Paul A. Stroud ◽  
David C. Sperry ◽  
...  

Pharmaceutics ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1682
Author(s):  
Raman Iyer ◽  
Vesna Petrovska Petrovska Jovanovska ◽  
Katja Berginc ◽  
Miha Jaklič ◽  
Flavio Fabiani ◽  
...  

Poorly water-soluble drugs pose a significant challenge to developability due to poor oral absorption leading to poor bioavailability. Several approaches exist that improve the oral absorption of such compounds by enhancing the aqueous solubility and/or dissolution rate of the drug. These include chemical modifications such as salts, co-crystals or prodrugs and physical modifications such as complexation, nanocrystals or conversion to amorphous form. Among these formulation strategies, the conversion to amorphous form has been successfully deployed across the pharmaceutical industry, accounting for approximately 30% of the marketed products that require solubility enhancement and making it the most frequently used technology from 2000 to 2020. This article discusses the underlying scientific theory and influence of the active compound, the material properties and manufacturing processes on the selection and design of amorphous solid dispersion (ASD) products as marketed products. Recent advances in the analytical tools to characterize ASDs stability and ability to be processed into suitable, patient-centric dosage forms are also described. The unmet need and regulatory path for the development of novel ASD polymers is finally discussed, including a description of the experimental data that can be used to establish if a new polymer offers sufficient differentiation from the established polymers to warrant advancement.


Pharmaceutics ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 159 ◽  
Author(s):  
Ryoma Tanaka ◽  
Yusuke Hattori ◽  
Yukun Horie ◽  
Hitoshi Kamada ◽  
Takuya Nagato ◽  
...  

A continuous-spray granulator (CTS-SGR) is a one-step granulation technology capable of using solutions or suspensions. The present research objectives were, (1) to reduce the manufacturing operations for solid dosage formulations, (2) to make amorphous solid dispersion (ASD) granules without pre-preparation of amorphous solids of active pharmaceutical ingredients (API), and (3) to characterize the obtained SGR granules by comprehensive pharmaceutical analysis. Rebamipide (RBM), a biopharmaceutical classification system class IV drug, that has low solubility or permeability in the stomach, was selected as a model compound. Five kind of granules with different concentrations of polyvinylpyrrolidone/vinyl acetate copolymer (PVP-VA) were prepared using a one-step SGR process. All of the SGR granules could be produced in amorphous or ASD form and their thermodynamic stability was very high because of high glass transition temperatures (>178 °C). They were unstable in 20 °C/75%RH; however, their stability was improved according to the proportion of polymer. The carboxy group of RBM was ionized in the granules and interactions appeared between RBM and PVP-VA, with the formation of an ASD confirmed and the solubility was enhanced compared with bulk RBM crystals. The SGR methodology has the possibility of contributing to process development in the pharmaceutical industry.


Sign in / Sign up

Export Citation Format

Share Document