Fracture Networks in Rotliegend Gas Reservoirs of the Dutch Offshore and their Impact on Field Development Planning and Infill Drilling: ABSTRACT

AAPG Bulletin ◽  
1995 ◽  
Vol 79 ◽  
Author(s):  
B. D. M. Gauthier, R. C. M. W. Fran
Author(s):  
Atheer Dheyauldeen ◽  
Omar Al-Fatlawi ◽  
Md Mofazzal Hossain

AbstractThe main role of infill drilling is either adding incremental reserves to the already existing one by intersecting newly undrained (virgin) regions or accelerating the production from currently depleted areas. Accelerating reserves from increasing drainage in tight formations can be beneficial considering the time value of money and the cost of additional wells. However, the maximum benefit can be realized when infill wells produce mostly incremental recoveries (recoveries from virgin formations). Therefore, the prediction of incremental and accelerated recovery is crucial in field development planning as it helps in the optimization of infill wells with the assurance of long-term economic sustainability of the project. Several approaches are presented in literatures to determine incremental and acceleration recovery and areas for infill drilling. However, the majority of these methods require huge and expensive data; and very time-consuming simulation studies. In this study, two qualitative techniques are proposed for the estimation of incremental and accelerated recovery based upon readily available production data. In the first technique, acceleration and incremental recovery, and thus infill drilling, are predicted from the trend of the cumulative production (Gp) versus square root time function. This approach is more applicable for tight formations considering the long period of transient linear flow. The second technique is based on multi-well Blasingame type curves analysis. This technique appears to best be applied when the production of parent wells reaches the boundary dominated flow (BDF) region before the production start of the successive infill wells. These techniques are important in field development planning as the flow regimes in tight formations change gradually from transient flow (early times) to BDF (late times) as the production continues. Despite different approaches/methods, the field case studies demonstrate that the accurate framework for strategic well planning including prediction of optimum well location is very critical, especially for the realization of the commercial benefit (i.e., increasing and accelerating of reserve or assets) from infilled drilling campaign. Also, the proposed framework and findings of this study provide new insight into infilled drilling campaigns including the importance of better evaluation of infill drilling performance in tight formations, which eventually assist on informed decisions process regarding future development plans.


2000 ◽  
Vol 79 (1) ◽  
pp. 45-57 ◽  
Author(s):  
B.D.M. Gauthier ◽  
R.C.W.M. Franssen ◽  
S. Drei

AbstractFracture systems of Rotliegend gas fields in and at the margins of the northern Broad Fourteens Basin in the Dutch offshore are described in terms of orientation, frequency, origin and type, and in relation to larger-scale structures. First, fracture data collected from core and image logs have been corrected to account for the bias related to the 1-D sampling. Second, these results were integrated with data on fracture cements and diagenesis in order to assess the timing of the fracture network development.On the basis of their regional extent three phases of fracturing and four orientation trends can be distinguished in the basin: (1)at Triassic times and related to early diagenesis and burial, NW-SE to NNW-SSE and NE-SW to ESE-WNW particulate-shear fractures developed;(2)during the Mid-Kimmerian and related to the main burial stage, shear-related and dilational-shear-fault-related fracturing occurred parallel with larger-scale faults;(3)during the Cretaceous and related to uplift, NW-SE and NE-SW joints propagated; a regional joint system developed outside the Jurassic rift basin, preferentially oriented E-W to ESE-WNW; these joints have not been dated accurately.The fault-related shear fractures tend to compartmentalise the reservoirs, whereas the regional joints tend to enhance reservoir flow properties. These fracture systems are thought to play a negative or positive role, respectively, but only in fields with poor reservoir quality. Consequently, in such cases small-scale fractures should be taken into account in field development planning.


2015 ◽  
Author(s):  
A. V. Alferov ◽  
A. G. Lutfurakhmanov ◽  
K. V. Litvinenko ◽  
S. E. Zdolnik

2016 ◽  
Vol 56 (1) ◽  
pp. 29 ◽  
Author(s):  
Neil Tupper ◽  
Eric Matthews ◽  
Gareth Cooper ◽  
Andy Furniss ◽  
Tim Hicks ◽  
...  

The Waitsia Field represents a new commercial play for the onshore north Perth Basin with potential to deliver substantial reserves and production to the domestic gas market. The discovery was made in 2014 by deepening of the Senecio–3 appraisal well to evaluate secondary reservoir targets. The well successfully delineated the extent of the primary target in the Upper Permian Dongara and Wagina sandstones of the Senecio gas field but also encountered a combination of good-quality and tight gas pay in the underlying Lower Permian Kingia and High Cliff sandstones. The drilling of the Waitsia–1 and Waitsia–2 wells in 2015, and testing of Senecio-3 and Waitsia-1, confirmed the discovery of a large gas field with excellent flow characteristics. Wireline log and pressure data define a gross gas column in excess of 350 m trapped within a low-side fault closure that extends across 50 km2. The occurrence of good-quality reservoir in the depth interval 3,000–3,800 m is diagenetically controlled with clay rims inhibiting quartz cementation and preserving excellent primary porosity. Development planning for Waitsia has commenced with the likelihood of an early production start-up utilising existing wells and gas processing facilities before ramp-up to full-field development. The dry gas will require minimal processing, and access to market is facilitated by the Dampier–Bunbury and Parmelia gas pipelines that pass directly above the field. The Waitsia Field is believed to be the largest conventional Australian onshore discovery for more than 30 years and provides impetus and incentive for continued exploration in mature and frontier basins. The presence of good-quality reservoir and effective fault seal was unexpected and emphasise the need to consider multiple geological scenarios and to test unorthodox ideas with the drill bit.


Sign in / Sign up

Export Citation Format

Share Document