Freeform reflector antenna design method to improve transmission efficiency and control output intensity distribution

2020 ◽  
Vol 59 (25) ◽  
pp. 7567
Author(s):  
Jingjing Zhang ◽  
Ping Jiang ◽  
Huajun Yang ◽  
Weinan Caiyang ◽  
Biao Cao ◽  
...  
Keyword(s):  
Intensity Distribution ◽  
Design Method ◽  
Transmission Efficiency ◽  
Reflector Antenna ◽  
Antenna Design ◽  
Output Intensity ◽  
And Control ◽  
Control Output

scholarly journals Method for designing multi-input system identification signals using a compact time-frequency representation

2021 ◽  
Author(s):  
Mathias Stefan Roeser ◽  
Nicolas Fezans
Keyword(s):  
System Identification ◽  
Design Method ◽  
Flight Test ◽  
Compact Representation ◽  
Time Frequency ◽  
Stability And Control ◽  
Frequency Representation ◽  
Aerodynamic Parameters ◽  
Definition Of ◽  
And Control

AbstractA flight test campaign for system identification is a costly and time-consuming task. Models derived from wind tunnel experiments and CFD calculations must be validated and/or updated with flight data to match the real aircraft stability and control characteristics. Classical maneuvers for system identification are mostly one-surface-at-a-time inputs and need to be performed several times at each flight condition. Various methods for defining very rich multi-axis maneuvers, for instance based on multisine/sum of sines signals, already exist. A new design method based on the wavelet transform allowing the definition of multi-axis inputs in the time-frequency domain has been developed. The compact representation chosen allows the user to define fairly complex maneuvers with very few parameters. This method is demonstrated using simulated flight test data from a high-quality Airbus A320 dynamic model. System identification is then performed with this data, and the results show that aerodynamic parameters can still be accurately estimated from these fairly simple multi-axis maneuvers.

Implementation of Wide-Area and Interconnected FPGA of Embedded Devices

2014 ◽  
Vol 687-691 ◽  
pp. 3102-3105
Author(s):  
Qin Zhang
Keyword(s):  
Design Method ◽  
Functional Module ◽  
Logic Device ◽  
Industrial Control ◽  
Embedded Internet ◽  
Programmable Device ◽  
The Difference ◽  
Development Tendency ◽  
And Control ◽  
Measurement And Control

Integration with Internet is the development tendency of industrial control network, and embedded Internet technique is the key of implementation. By analyzing field bus Technology and combining actual demand, the paper proposes dial-up high-density programmable logic device solution of remote embedded measurement and control equipment. For the purpose of implementing reuse of design modules and upgrading requirement, the paper systematically expounds top-down hierarchy design method for implementing functional module division. According to the difference of implementation complexity because of the difference of functions, the paper finally analyzes the characteristics and applications of programmable device, and proposes the improvement direction.

scholarly journals Dynamic Analysis and Control of an Automatic Transmission for Start-Stop Function and Efficiency Improvement

2015 ◽  
Vol 2015 ◽  
pp. 1-13
Author(s):  
Yang Liu ◽  
Shuhan Wang ◽  
Peng Dong ◽  
Xiangyang Xu
Keyword(s):  
Control Strategies ◽  
Automatic Transmission ◽  
Simulation Method ◽  
Transmission Efficiency ◽  
The Novel ◽  
Test Results ◽  
Test Environment ◽  
Pump System ◽  
Oil Pump ◽  
And Control

An electric oil pump (EOP) was integrated into the hydraulic system and an automatic transmission (AT) mechanical oil pump (MOP) was downsized. These processes were performed to combine a start-stop function with the AT and further improve the transmission efficiency. Furthermore, this study established a dynamics model of power loss and leakage of an 8-speed AT; a flow-based control algorithm of the EOP was then developed to realize the start-stop function and support the MOP to meet the flow requirement of the system. Based on a driving simulation method, sizes of the MOP and EOP that ensured optimal fuel economy were selected. A control strategy for the starting clutch was also developed to minimize the starting delay of the test vehicle. A test environment on a rig and prototype vehicle was established to verify the feasibility of the proposed control strategies. The test results indicated that the transmission functioned favorably with the novel two-pump system presented, and a quick and smooth starting performance was achieved when the engine was restarted. The findings in this study are extremely valuable for forward designs of an AT for realizing start-stop function and improving efficiency.

Multi Mode Vibration Control and Broder Band Motion Control of Three Dimensional Shaking Table

2005 ◽  
Author(s):  
Tsunehiro Wakasugi ◽  
Toru Watanabe ◽  
Kazuto Seto
Keyword(s):  
Vibration Control ◽  
Controller Design ◽  
Design Method ◽  
Three Dimensional ◽  
Design Procedure ◽  
Equation System ◽  
State Equation ◽  
Shaking Table ◽  
Mode Vibration ◽  
And Control

This paper deals with a new system design method for motion and vibration control of a three-dimensional flexible shaking table. An integrated modeling and controller design procedure for flexible shaking table system is presented. An experimental three-dimensional shaking table is built. “Reduced-Order Physical Model” procedure is adopted. A state equation system model is composed and a feedback controller is designed by applying LQI control law to achieve simultaneous motion and vibration control. Adding a feedforward, two-degree-of-freedom control system is designed. Computer simulations and control experiments are carried out and the effectiveness of the presented procedure is investigated. The robustness of the system is also investigated.

Design of Mine Ventilation Systems Based on Artificial Intelligence

2014 ◽  
Vol 614 ◽  
pp. 107-112
Author(s):  
Xiao Yu Yin ◽  
Xian Ping Xie ◽  
Zhen Li ◽  
Jian Gong Li ◽  
Ting Jun Wang ◽  
...  
Keyword(s):  
Expert System ◽  
Computer Aided Design ◽  
Design Method ◽  
Mine Ventilation ◽  
Design System ◽  
Knowledge Based ◽  
Aided Design ◽  
And Control ◽  
Intelligent Computer ◽  
Ventilation Systems

Expert systems, or knowledge based systems, are programs in which the answer to a user-posed question is reached by logical or plausible inference rather than strictly by calculation, although calculation routines can form a major part of an expert system. Based on the integration of expert system technology and optimization technology, an intelligent computer aided design method for mine ventilation systems is proposed in this paper. Firstly, the structure and control algorithm of the intelligent design system are explored. Secondly, the knowledge types required for the mine ventilation expert system and the acquiring method of knowledge are discussed. Finally, the inference method of this expert system is put forward.

Sign in / Sign up

Export Citation Format

Share Document