High-quality full-parallax full-color three-dimensional image reconstructed by stacking large-scale computer-generated volume holograms

2019 ◽  
Vol 58 (34) ◽  
pp. G104 ◽  
Author(s):  
Orie Kunieda ◽  
Kyoji Matsushima
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
High Quality ◽  
Dimensional Image ◽  
Volume Holograms ◽  
Full Color

3D Digital Measurement of Large Scale Objects Based on Viscous Target

2005 ◽  
Vol 295-296 ◽  
pp. 687-692 ◽  
Author(s):  
B. Wu ◽  
Ji Gui Zhu ◽  
Xue You Yang ◽  
T. Xue ◽  
S.H. Ye
Keyword(s):  
Large Scale ◽  
Screw Theory ◽  
Three Dimensional ◽  
Automatic Identification ◽  
Digital Measurement ◽  
Image Mosaic ◽  
Space Length ◽  
Dimensional Image ◽  
Spatial Image ◽  
Measuring Field

For 3D digital measurement of large scale objects, image mosaic is the key technology to achieve whole measurement for a small measuring field of the sensor unit. A viscous-target-based three-dimensional image mosaic technology is proposed. The screw theory is introduced to realize the spatial image mosaic. The method permits an automatic identification of targets and a better matching for the feature coded technology. In experiments, the method was proved to be valid, with a relatively high precision on three-dimensional image mosaic. The relative error of the space length measurement is less than 0.6%.

scholarly journals Development of High Speed and High Quality Three-dimensional Image Processing System for Helical CT

1995 ◽  
Vol 51 (8) ◽  
pp. 940
Author(s):  
Yuko Tanaka ◽  
Norihiro Gunji ◽  
Ichiro Yamagishi ◽  
Tomoyasu Komori ◽  
Tomohiko Kihara ◽  
...  
Keyword(s):  
Image Processing ◽  
High Speed ◽  
Three Dimensional ◽  
Processing System ◽  
Helical Ct ◽  
High Quality ◽  
Image Processing System ◽  
Dimensional Image

Criteria and Methods for Reliable Three-Dimensional Image Reconstruction

1974 ◽  
Vol 32 ◽  
pp. 330-331
Author(s):  
R. A. Crowther
Keyword(s):  
Image Reconstruction ◽  
Finite Number ◽  
Density Distribution ◽  
Electron Micrographs ◽  
Mathematical Problem ◽  
Three Dimensional ◽  
Ideal Case ◽  
Dimensional Image ◽  
General Object ◽  
The Ideal

The reconstruction of a three-dimensional image of a specimen from a set of electron micrographs reduces, under certain assumptions about the imaging process in the microscope, to the mathematical problem of reconstructing a density distribution from a set of its plane projections.In the absence of noise we can formulate a purely geometrical criterion, which, for a general object, fixes the resolution attainable from a given finite number of views in terms of the size of the object. For simplicity we take the ideal case of projections collected by a series of m equally spaced tilts about a single axis.

An experience of elaboration and implementation of systems of slag-forming mixtures mechanized feeding into CCM moulds

2020 ◽  
Vol 76 (10) ◽  
pp. 994-1003
Author(s):  
S. P. Eron’ko ◽  
M. Yu. Tkachev ◽  
E. V. Oshovskaya ◽  
B. I. Starodubtsev ◽  
S. V. Mechik
Keyword(s):  
Economic Effect ◽  
Three Dimensional ◽  
Movable Part ◽  
High Quality ◽  
Working Zone ◽  
Fine Material ◽  
Mixing Chamber ◽  
Field Samples ◽  
Technical Solutions ◽  
Feeding Systems

Effective application of slag-forming mixtures (SFM), being fed into continuous castingg machine (CCM) moulds, depends on their even distribution on the melt surface. Manual feeding of the SFM which is widely usedd does not provide this condition, resulting in the necessity to actualize the work to elaborate systems of SFM mechanized feedingg into moulds of various types CCM. A concept of the designing of a system of SFM feeding into CCM moulds presented with the ratte strictly correspondent to the casting speed and providing formation of an even layer of fine material of given thickness on the whoole surface of liquid steel. The proposed methods of designing of the SFM mechanized feeding systems based on three-dimensional computer simulation with the subsequent verification of the correctness of the adopted technical solutions on field samples. Informattion is presented on the design features of the adjusted facilities intended for continuous supply of finely granulated and powder mixtuures on metal mirror in moulds at the production of high-quality billets, blooms and slabs. Variants of mechanical and pneumo-mechaanical SFM supply elaborated. At the mechanical supply the fine material from the feeding hopper is moved at a adjusted distance bby a rigid horizontally located screw. At the pneumo-mechanical supply the metered doze of the granular mixture is delivered by a sshort vertical screw, the lower part of which is located in the mixing chamber attached from below to the hopper and equipped with ann ejector serving for pneumatic supply of the SFM in a stream of transporting gas. It was proposed to use flexible spiral screws in the ffuture facilities of mechanical SFM feeding. It will enable to eliminate the restrictions stipulated by the lack of free surface for locatiion of the facility in the working zone of the tundish, as well as to decrease significantly the mass of its movable part and to decreaase the necessary power of the carriage moving mechanism driver. The novelty of the proposed technical solutions is protected by thhree patents. The reduction of 10–15% in the consumption of slag-forming mixtures during the transition from manual to mechanizeed feeding confirmed. The resulting economic effect from the implementation of technical development enables to recoup the costs inncurred within 8–10 months.

A Three-dimensional Camera: Development and Applications of a Three-dimensional Image Measurement System

2011 ◽  
Vol 131 (2) ◽  
pp. 320-328 ◽  
Author(s):  
Cunwei Lu ◽  
Hiroya Kamitomo ◽  
Ke Sun ◽  
Kazuhiro Tsujino ◽  
Genki Cho
Keyword(s):  
Measurement System ◽  
Three Dimensional ◽  
Image Measurement ◽  
Dimensional Image

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals Vibration characteristics of triple-gear-rotor system in compressed air energy storage under variable torque load

2021 ◽  
Vol 104 (1) ◽  
pp. 003685042098705
Author(s):  
Xinran Wang ◽  
Yangli Zhu ◽  
Wen Li ◽  
Dongxu Hu ◽  
Xuehui Zhang ◽  
...  
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Element Model ◽  
Rotor System ◽  
Dynamic Responses ◽  
System Response ◽  
Rotating Speed ◽  
Torque Load ◽  
Set Up ◽  
Two Stages

This paper focuses on the effects of the off-design operation of CAES on the dynamic characteristics of the triple-gear-rotor system. A finite element model of the system is set up with unbalanced excitations, torque load excitations, and backlash which lead to variations of tooth contact status. An experiment is carried out to verify the accuracy of the mathematical model. The results show that when the system is subjected to large-scale torque load lifting at a high rotating speed, it has two stages of relatively strong periodicity when the torque load is light, and of chaotic when the torque load is heavy, with the transition between the two states being relatively quick and violent. The analysis of the three-dimensional acceleration spectrum and the meshing force shows that the variation in the meshing state and the fluctuation of the meshing force is the basic reasons for the variation in the system response with the torque load. In addition, the three rotors in the triple-gear-rotor system studied show a strong similarity in the meshing states and meshing force fluctuations, which result in the similarity in the dynamic responses of the three rotors.

Sign in / Sign up

Export Citation Format

Share Document