Controlling the Behavior of Single Live Cells with High Density Arrays of Microscopic OLEDs

The growth of ternary III-V semiconductors by organo-metallic vapor phase epitaxy (OMVPE) is widely practiced. It has been generally assumed that the resulting structure is the same as that of the corresponding binary semiconductors, but with the two different cation or anion species randomly distributed on their appropriate sublattice sites. Recently several different ternary semiconductors including AlxGa1-xAs, Gaxln-1-xAs and Gaxln1-xP1-6 have been observed in ordered states. A common feature of these ordered compounds is that they contain a relatively high density of defects. This is evident in electron diffraction patterns from these materials where streaks, which are typically parallel to the growth direction, are associated with the extra reflections arising from the ordering. However, where the (Ga,ln)P epilayer is reasonably well ordered the streaking is extremely faint, and the intensity of the ordered spot at 1/2(111) is much greater than that at 1/2(111). In these cases it is possible to image relatively clearly many of the defects found in the ordered structure.

Download Full-text

Quantitative defect studies in semiconductor TEM samples prepared by low angle ion milling

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100138932 ◽

1995 ◽

Vol 53 ◽

pp. 512-513

Author(s):

L. Mulestagno ◽

J.C. Holzer ◽

P. Fraundorf

Keyword(s):

Sample Preparation ◽

Milling Time ◽

High Density ◽

Low Density ◽

Ion Milling ◽

High Quality ◽

Variable Angle ◽

Major Disadvantage ◽

Induced Defects

Due to the wealth of information, both analytical and structural that can be obtained from it TEM always has been a favorite tool for the analysis of process-induced defects in semiconductor wafers. The only major disadvantage has always been, that the volume under study in the TEM is relatively small, making it difficult to locate low density defects, and sample preparation is a somewhat lengthy procedure. This problem has been somewhat alleviated by the availability of efficient low angle milling.Using a PIPS® variable angle ion -mill, manufactured by Gatan, we have been consistently obtaining planar specimens with a high quality thin area in excess of 5 × 104 μm2 in about half an hour (milling time), which has made it possible to locate defects at lower densities, or, for defects of relatively high density, obtain information which is statistically more significant (table 1).

Download Full-text

4-dimensional, high-resolution imaging of living cells

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100122484 ◽

1992 ◽

Vol 50 (1) ◽

pp. 416-417

Author(s):

Shinya Inoué

Keyword(s):

Light Microscope ◽

Living Cells ◽

Live Cells ◽

Video Tape ◽

Active Living ◽

High Resolution Imaging ◽

3 Dimensional ◽

Dynamic Architecture ◽

Resolution Imaging ◽

Disk Memory

This paper reports progress of our effort to rapidly capture, and display in time-lapsed mode, the 3-dimensional dynamic architecture of active living cells and developing embryos at the highest resolution of the light microscope. Our approach entails: (A) real-time video tape recording of through-focal, ultrathin optical sections of live cells at the highest resolution of the light microscope; (B) repeat of A at time-lapsed intervals; (C) once each time-lapsed interval, an image at home focus is recorded onto Optical Disk Memory Recorder (OMDR); (D) periods of interest are selected using the OMDR and video tape records; (E) selected stacks of optical sections are converted into plane projections representing different view angles (±4 degrees for stereo view, additional angles when revolving stereos are desired); (F) analysis using A - D.

Download Full-text

Using the scanning electron microscope for failure analysis of high density magnetic media

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100126755 ◽

1987 ◽

Vol 45 ◽

pp. 392-393

Author(s):

Evelyn R. Ackerman ◽

Gary D. Burnett

Keyword(s):

Electron Microscope ◽

Scanning Electron Microscope ◽

Failure Analysis ◽

High Density ◽

Magnetic Media ◽

Specific Data ◽

Retrieval Systems ◽

Operating Environments ◽

The Media ◽

Scanning Electron

Advancements in state of the art high density Head/Disk retrieval systems has increased the demand for sophisticated failure analysis methods. From 1968 to 1974 the emphasis was on the number of tracks per inch. (TPI) ranging from 100 to 400 as summarized in Table 1. This emphasis shifted with the increase in densities to include the number of bits per inch (BPI). A bit is formed by magnetizing the Fe203 particles of the media in one direction and allowing magnetic heads to recognize specific data patterns. From 1977 to 1986 the tracks per inch increased from 470 to 1400 corresponding to an increase from 6300 to 10,800 bits per inch respectively. Due to the reduction in the bit and track sizes, build and operating environments of systems have become critical factors in media reliability.Using the Ferrofluid pattern developing technique, the scanning electron microscope can be a valuable diagnostic tool in the examination of failure sites on disks.

Download Full-text

Multi-mode light microscopy of microtubule assembly dynamics and chromosome movement in vivo and In vitro

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100166117 ◽

1996 ◽

Vol 54 ◽

pp. 730-731

Author(s):

E. D. Salmon ◽

J. C. Waters ◽

C. Waterman-Storer

Keyword(s):

Imaging System ◽

Ccd Camera ◽

Transmitted Light ◽

Microtubule Assembly ◽

Live Cells ◽

Optical Efficiency ◽

Multiple Band ◽

Multi Mode

We have developed a multi-mode digital imaging system which acquires images with a cooled CCD camera (Figure 1). A multiple band pass dichromatic mirror and robotically controlled filter wheels provide wavelength selection for epi-fluorescence. Shutters select illumination either by epi-fluorescence or by transmitted light for phase contrast or DIC. Many of our experiments involve investigations of spindle assembly dynamics and chromosome movements in live cells or unfixed reconstituted preparations in vitro in which photodamage and phototoxicity are major concerns. As a consequence, a major factor in the design was optical efficiency: achieving the highest image quality with the least number of illumination photons. This principle applies to both epi-fluorescence and transmitted light imaging modes. In living cells and extracts, microtubules are visualized using X-rhodamine labeled tubulin. Photoactivation of C2CF-fluorescein labeled tubulin is used to locally mark microtubules in studies of microtubule dynamics and translocation. Chromosomes are labeled with DAPI or Hoechst DNA intercalating dyes.

Download Full-text

Characterization of a Motile Cellular Domain Arising During the Amoebo-Flagellate Transformation of Physarum Polycephalum

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s1431927600002440 ◽

1980 ◽

Vol 38 ◽

pp. 552-553

Author(s):

K.I. Pagh ◽

M.R. Adelman

Keyword(s):

Cell Shape ◽

Physarum Polycephalum ◽

Slime Mold ◽

Live Cells ◽

Cellular Domain

Unicellular amoebae of the slime mold Physarum polycephalum undergo marked changes in cell shape and motility during their conversion into flagellate swimming cells (l). To understand the processes underlying motile activities expressed during the amoebo-flagellate transformation, we have undertaken detailed investigations of the organization, formation and functions of subcellular structures or domains of the cell which are hypothesized to play a role in movement. One focus of our studies is on a structure, termed the “ridge” which appears as a flattened extension of the periphery along the length of transforming cells (Fig. 1). Observations of live cells using Nomarski optics reveal two types of movement in this region:propagation of undulations along the length of the ridge and formation and retraction of filopodial projections from its edge. The differing activities appear to be associated with two characteristic morphologies, illustrated in Fig. 1.

Download Full-text