scholarly journals Correction: Biological Responses of Three-Dimensional Cultured Fibroblasts by Sustained Compressive Loading Include Apoptosis and Survival Activity

PLoS ONE ◽  
2015 ◽  
Vol 10 (3) ◽  
pp. e0119308
Author(s):  
PLoS ONE ◽  
2014 ◽  
Vol 9 (8) ◽  
pp. e104676 ◽  
Author(s):  
Toshiki Kanazawa ◽  
Gojiro Nakagami ◽  
Takeo Minematsu ◽  
Takumi Yamane ◽  
Lijuan Huang ◽  
...  

2019 ◽  
Vol 15 (1) ◽  
pp. 99-108
Author(s):  
Lim Pei Chee ◽  
Ruslizam Daud ◽  
Shah Fenner Khan Mohamad Khan ◽  
Nurul Alia Md Zain ◽  
Yazid Bajuri

A newly designed Uniaxial external fixator which functions as a universal fixator in the application of all types of bone fractures is recently introduced by both Hospital Universiti Kebangsaan Malaysia (HUKM) and Universiti Malaysia Perlis (UniMAP). The Investigation is focused on identifying and measuring the performance in terms of strength or weakness of the fixator that is needed before the application to the human body. Hence, this research was conducted to determine the performance of Uniaxial external fixator which was based on geometry using different screw drilling techniques applied during an angled uniaxial compression load.  A three-dimensional fixator-bone was constructed using different screw inserting techniques which was then converted into ANSYS v14.5 for the purposes of conducting a finite element analysis (FEA).  Axial compressive loading with various degrees from 60 to 6300 N were applied to bone models to stimulate patient’s daily activities while 10 to 100 N were applied to fixator models for the purposes of reviewing environmental loading to fixator-bone models. Findings revealed that maximum magnitude which caused deformation for predrilling and self-drilling models were located at the highest pin-bone interaction. Conversely, the maximum magnitude of the von Mises strain and stress was located at the lowest pin-bone interaction by omitting the existence of fixator for both Case 1 and 2. There was no obvious difference in the comparison of both models in terms of deformation. However, predrilling models have higher strain and stress than self-drilling models. In sum, findings indicated that self-drilling models have better performance compared to the predrilling models.


2018 ◽  
Vol 285 (1887) ◽  
pp. 20181473 ◽  
Author(s):  
Charlotte A. Brassey ◽  
James D. Gardiner ◽  
Andrew C. Kitchener

The baculum (os penis) is a mineralized bone within the glans of the mammalian penis and is one of the most morphologically diverse structures in the mammal skeleton. Recent experimental work provides compelling evidence for sexual selection shaping the baculum, yet the functional mechanism by which this occurs remains unknown. Previous studies have tested biomechanical hypotheses for the role of the baculum based on simple metrics such as length and diameter, ignoring the wealth of additional shape complexity present. For the first time, to our knowledge, we apply a computational simulation approach (finite-element analysis; FEA) to quantify the three-dimensional biomechanical performance of carnivoran bacula (n= 74) based upon high-resolution micro-computed tomography scans. We find a marginally significant positive correlation between sexual size dimorphism and baculum stress under compressive loading, counter to the ‘vaginal friction’ hypothesis of bacula becoming more robust to overcome resistance during initial intromission. However, a highly significant negative relationship exists between intromission duration and baculum stress under dorsoventral bending. Furthermore, additional FEA simulations confirm that the presence of a ventral groove would reduce deformation of the urethra. We take this as evidence in support of the ‘prolonged intromission’ hypothesis, suggesting the carnivoran baculum has evolved in response to pressures on the duration of copulation and protection of the urethra.


2018 ◽  
Vol 38 (2) ◽  
pp. 49-61 ◽  
Author(s):  
M Tarfaoui ◽  
M Nachtane

A series of split Hopkinson pressure bar tests on two-dimensional and three-dimensional woven composites were presented in order to obtain a reliable comparison between the two types of composites and the effect of the z-yarns along the third direction. These tests were done along different configurations: in-plane and out-of-plane compression test. For the three-dimensional woven composite, two different configurations were studied: compression responses along to the stitched direction and orthogonal to the stitched direction. It was found that three-dimensional woven composites exhibit an increase in strength for both: in-plane and out-of-plane tests.


2015 ◽  
Vol 15 (03) ◽  
pp. 1550028 ◽  
Author(s):  
XIANBIN ZHANG ◽  
HE GONG

In bone tissue engineering, mechanical stimuli are among the key factors affecting cell proliferation and differentiation. This study aimed to investigate the effects of different inlet fluid velocities and axial strains on the differentiation of bone marrow mesenchymal stem cells (BMSCs) on the surface of scaffolds with different morphologies. Five three-dimensional bone scaffold architectures with 65% porosity were designed using typical cellular structural models of trabecular bone. Apparent compressive strains between 0% and 5% were applied to simulate an unconfined compression test. Strain distributions were analyzed on the wall surface of the solid model. The interstitial fluid flow at inlet velocities ranging between 0.01 mm/s and 1 mm/s was applied to interconnected pores, simulating a steady state flow in the scaffold. The shear stress distributions on the surface of the scaffolds were calculated. The differentiation of BMSCs on the surface of the scaffolds with different morphologies was predicted according to mechanoregulation theory. This study shows that different levels of mechanical stimuli can be generated as a result of different scaffold morphologies under compressive loading and fluid flow to satisfy the mechanical requirements for different bone defect sites.


2021 ◽  
Vol 17 (6) ◽  
pp. e1009164
Author(s):  
Jonathan P. Alberding ◽  
Timothy W. Secomb

The vasculature is a dynamic structure, growing and regressing in response to embryonic development, growth, changing physiological demands, wound healing, tumor growth and other stimuli. At the microvascular level, network geometry is not predetermined, but emerges as a result of biological responses of each vessel to the stimuli that it receives. These responses may be summarized as angiogenesis, remodeling and pruning. Previous theoretical simulations have shown how two-dimensional vascular patterns generated by these processes in the mesentery are consistent with experimental observations. During early development of the brain, a mesh-like network of vessels is formed on the surface of the cerebral cortex. This network then forms branches into the cortex, forming a three-dimensional network throughout its thickness. Here, a theoretical model is presented for this process, based on known or hypothesized vascular response mechanisms together with experimentally obtained information on the structure and hemodynamics of the mouse cerebral cortex. According to this model, essential components of the system include sensing of oxygen levels in the midrange of partial pressures and conducted responses in vessel walls that propagate information about metabolic needs of the tissue to upstream segments of the network. The model provides insights into the effects of deficits in vascular response mechanisms, and can be used to generate physiologically realistic microvascular network structures.


Sign in / Sign up

Export Citation Format

Share Document