Overview of Fluorescence Analysis with the Confocal Microscope

1994 ◽  
pp. 337-347 ◽  
Author(s):  
Liana Harvath
Keyword(s):  
Fluorescence Analysis ◽  
Confocal Microscope

An x-ray microprobe based upon a close-coupled focal-spot / glass capillary arrangement

1992 ◽  
Vol 50 (2) ◽  
pp. 1758-1759
Author(s):  
D. A. Carpenter ◽  
M. A. Taylor
Keyword(s):  
Imaging Techniques ◽  
Fluorescence Analysis ◽  
High Sensitivity ◽  
Specimen Preparation ◽  
X Rays ◽  
Glass Capillary ◽  
Close Coupling ◽  
X Ray ◽  
Point To Point ◽  
Beam Damage

The development of intense sources of x rays has led to renewed interest in the use of microbeams of x rays in x-ray fluorescence analysis. Sparks pointed out that the use of x rays as a probe offered the advantages of high sensitivity, low detection limits, low beam damage, and large penetration depths with minimal specimen preparation or perturbation. In addition, the option of air operation provided special advantages for examination of hydrated systems or for nondestructive microanalysis of large specimens.The disadvantages of synchrotron sources prompted the development of laboratory-based instrumentation with various schemes to maximize the beam flux while maintaining small point-to-point resolution. Nichols and Ryon developed a microprobe using a rotating anode source and a modified microdiffractometer. Cross and Wherry showed that by close-coupling the x-ray source, specimen, and detector, good intensities could be obtained for beam sizes between 30 and 100μm. More importantly, both groups combined specimen scanning with modern imaging techniques for rapid element mapping.

XRMF applications of a monolithic, polycapillary, focusing x-ray optic

1996 ◽  
Vol 54 ◽  
pp. 240-241
Author(s):  
D. A. Carpenter ◽  
Ning Gao ◽  
G. J. Havrilla
Keyword(s):  
Trace Elements ◽  
Point Source ◽  
Focal Spot ◽  
Fluorescence Analysis ◽  
X Rays ◽  
Focal Distance ◽  
Spot Diameter ◽  
X Ray ◽  
Focal Spot Diameter

A monolithic, polycapillary, x-ray optic was adapted to a laboratory-based x-ray microprobe to evaluate the potential of the optic for x-ray micro fluorescence analysis. The polycapillary was capable of collecting x-rays over a 6 degree angle from a point source and focusing them to a spot approximately 40 µm diameter. The high intensities expected from this capillary should be useful for determining and mapping minor to trace elements in materials. Fig. 1 shows a sketch of the capillary with important dimensions.The microprobe had previously been used with straight and with tapered monocapillaries. Alignment of the monocapillaries with the focal spot was accomplished by electromagnetically scanning the focal spot over the beveled anode. With the polycapillary it was also necessary to manually adjust the distance between the focal spot and the polycapillary.The focal distance and focal spot diameter of the polycapillary were determined from a series of edge scans.

The influence of confocal microscope design on imaging performance

1993 ◽  
Vol 51 ◽  
pp. 144-145
Author(s):  
C J R Sheppard
Keyword(s):  
Image Quality ◽  
Fluorescence Imaging ◽  
Confocal Microscope ◽  
Industrial Applications ◽  
Three Dimensions ◽  
Design Parameters ◽  
Weak Signals ◽  
Size And Shape ◽  
Imaging Performance ◽  
Fundamental Limitation

The confocal microscope is now widely used in both biomedical and industrial applications for imaging, in three dimensions, objects with appreciable depth. There are now a range of different microscopes on the market, which have adopted a variety of different designs. The aim of this paper is to explore the effects on imaging performance of design parameters including the method of scanning, the type of detector, and the size and shape of the confocal aperture.It is becoming apparent that there is no such thing as an ideal confocal microscope: all systems have limitations and the best compromise depends on what the microscope is used for and how it is used. The most important compromise at present is between image quality and speed of scanning, which is particularly apparent when imaging with very weak signals. If great speed is not of importance, then the fundamental limitation for fluorescence imaging is the detection of sufficient numbers of photons before the fluorochrome bleaches.

A new miniaturized confocal microscope allows immediate in vivo histology of different organs

2005 ◽  
Vol 43 (05) ◽  
Author(s):  
M Goetz ◽  
MF Neurath ◽  
P Delaney ◽  
S Gregor ◽  
D Strand ◽  
...  
Keyword(s):  
Confocal Microscope

Sorption of Se (IV) from aqueous solutions with subsequent determination by X-ray fluorescence analysis

2020 ◽  
Vol 86 (10) ◽  
pp. 5-9
Author(s):  
D. G. Filatova ◽  
A. A. Arkhipenko ◽  
M. A. Statkus ◽  
V. V. Es’kina ◽  
V. B. Baranovskaya ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Fluorescence Analysis ◽  
Standard Samples ◽  
Phase Contact Time ◽  
Sorbent Phase ◽  
X Ray ◽  
Fundamental Parameters ◽  
Inductively Coupled ◽  
Subsequent Determination

An approach to sorptive separation of Se (IV) from solutions on a novel S,N-containing sorbent with subsequent determination of the analyte in the sorbent phase by micro-x-ray fluorescence method is presented. The sorbent copolymethylenesulfide-N-alkyl-methylenamine (CMA) was synthesized using «snake in the cage» procedure and proven to be stable in acid solutions. Conditions for quantitative extraction of Se (IV) were determined: sorption in 5 M HCl or 0.05 M HNO3 solutions when heated to 60°C, phase contact time being 1 h. The residual selenium content in the solution was determined by inductively coupled plasma mass spectrometry (ICP-MS) using 82Se isotope. The absence of selenium losses is proved and the mechanism of sorption interaction under specified conditions is proposed. The method of micro-x-ray fluorescence analysis (micro-RFA) with mapping revealed a uniform distribution of selenium on the sorbent surface. The possibility of determining selenium in the sorbent phase by micro-RFA is shown. When comparing the obtained results with the results of calculations by the method of fundamental parameters, it is shown the necessity of using standard samples of sorbates to obtain correct results of RFA determination of selenium in the sorbent phase.

scholarly journals A white light confocal microscope for spectrally resolved multidimensional imaging

2007 ◽  
Vol 227 (3) ◽  
pp. 203-215 ◽  
Author(s):  
J. H. FRANK ◽  
A. D. ELDER ◽  
J. SWARTLING ◽  
A. R. VENKITARAMAN ◽  
A. D. JEYASEKHARAN ◽  
...  
Keyword(s):  
White Light ◽  
Confocal Microscope ◽  
Multidimensional Imaging ◽  
Spectrally Resolved
Sign in / Sign up

Export Citation Format

Share Document