scholarly journals Deep Eutectic Solvents Based Choline Chloride for Enzymatic Biodiesel Production from Degumming Palm Oil

2020 ◽  
Vol 32 (4) ◽  
pp. 733-738 ◽  
Author(s):  
R. Manurung ◽  
Taslim ◽  
A.G.A. Siregar

Deep eutectic solvents (DESs) have numerous potential applications as cosolvents. In this study, use of DES as organic solvents for enzymatic biodiesel production from degumming palm oil (DPO) was investigated. Deep eutectic solvent was synthesized using choline chloride salt (ChCl) compounds with glycerol and 1,2-propanediol. Deep eutectic solvent was characterized by viscosity, density, pH and freezing values, which were tested for effectiveness by enzymatic reactions for the production of palm biodiesel with raw materials DPO. Deep eutectic solvent of ChCl and glycerol produced the highest biodiesel yield (98.98%); weight of DES was only 0.5 % of that of the oil. In addition, the use of DES maintained the activity and stability of novozym enzymes, which was assessed as the yield until the 6th usage, which was 95.07 % biodiesel yield compared with the yield without using DES. Hence, using DES, glycerol in enzymatic biodiesel production had high potentiality as an organic solvent for palm oil biodiesel production

2020 ◽  
Vol 35 ◽  
pp. 9-17
Author(s):  
Renita Manurung ◽  
Alwi Gery Siregar

In this study, deep eutectic solvent (DES) used as co solvent for enzymatic biodiesel production from degumming palm oil (DPO). DES is formed from the salt compound choline-chloride (ChCI) with glycerol at 1:2 molar ratio. Furthermore, the effectiveness of the DES was tested by enzymatic reactions using novozym 435® for the production of palm biodiesel with raw materials DPO. The use of enzymes with the DES system can maintain the activity and stability of the novozyme enzyme measured by the yield produced until the 10th usage produces biodiesel yield > 99% with a concentration of DES 0.5% with a molar ratio of 0.5% water. Spectra of DES ChCI:glycerol and ChCI:glycerol:water characterized by FTIR, morphological structure novozym by characterized SEM and then biodiesel product analyzed by GC-MS. This shows that the ChCI:glycerol:water system in enzymatic biodiesel production has good potential to maintain enzyme activity and stability.


2021 ◽  
Author(s):  
Qi-feng Wang ◽  
Yong-jun Gu ◽  
Qian Li ◽  
Jin-liang Huang ◽  
Min Chen ◽  
...  

Abstract Chloride-malonate deep eutectic solvent (Cm-DES) was applied to synthesize nano-crystalline Zr0.8Sn0.2TiO4 ceramic powder by using Zr(CH3COO)4, SnCl2∙2H2O and Ti(OCH3CH3)4 as raw materials. The nano-crystalline Zr0.8Sn0.2TiO4 powder was obtained at 450 °C, dramatically lower than that by solid state reaction. Meantime, the grain size of as-synthesized Zr0.8Sn0.2TiO4 powder at 450 °C is 10.7 nm. In the synthesized process, Cm-DES, as a solvent and template, affects the synthesis process and the time required for synthesis is greatly reduced. These results show that the Cm-DES is suitable and prospective for the synthesis of nano-crystalline Zr0.8Sn0.2TiO4 ceramic powder, which could contribute to reduce energy consumption and time cost.


2021 ◽  
Vol 23 (3) ◽  
pp. 1300-1311 ◽  
Author(s):  
Dasom Jung ◽  
Jae Back Jung ◽  
Seulgi Kang ◽  
Ke Li ◽  
Inseon Hwang ◽  
...  

The in vitro and in vivo studies suggest that choline chloride-based deep eutectic solvents may not be considered as pure, safe mixtures even if they consist of safe compounds.


BioResources ◽  
2017 ◽  
Vol 12 (4) ◽  
pp. 7301-7310
Author(s):  
Veronika Majová ◽  
Silvia Horanová ◽  
Andrea Škulcová ◽  
Jozef Šima ◽  
Michal Jablonský

This study aimed to resolve the issue of the lack of detailed understanding of the effect of initial lignin content in hardwood kraft pulps on pulp delignification by deep eutectic solvents. The authors used Kappa number of the concerned pulp, intrinsic viscosity, and selectivity and efficiency of delignification as the parameters of the effect. The pulp (50 g oven dry pulp) was treated with four different DESs systems based on choline chloride with lactic acid (1:9), oxalic acid (1:1), malic acid (1:1), and system alanine:lactic acid (1:9); the results were compared to those reached by oxygen delignification. The results showed that the pulp with a higher initial lignin content had a greater fraction of easily removed lignin fragments.


Environments ◽  
2020 ◽  
Vol 7 (11) ◽  
pp. 97
Author(s):  
Chiau Yuan Lim ◽  
Mohd Faridzuan Majid ◽  
Sarrthesvaarni Rajasuriyan ◽  
Hayyiratul Fatimah Mohd Zaid ◽  
Khairulazhar Jumbri ◽  
...  

Extractive catalytic oxidative desulfurization (ECODS) is the one of the recent methods used in fuel desulfurization which involved the use of catalyst in the oxidative desulfurization of diesel fuel. This study is aimed to test the effectiveness of synthesized choline chloride (ChCl) based deep eutectic solvent (DES) in fuel desulfurization via ECODS method, with the presence of graphene oxide (GO) as catalyst and hydrogen peroxide (H2O2) as oxidant. In this study, 16 DESs based on choline chloride were synthesized using glycerol (GLY), ethylene glycol (EG), tetraethylene glycol (TEG) and polyethylene glycol (PEG). The characterization of the synthesized DES was carried out via Fourier transform infrared spectroscopy (FTIR) analysis, density, and viscosity determination. According to the screening result, ChCl-PEG (1:4) was found to be the most effective DES for desulfurization using ECODS method, with a removal of up to 47.4% of sulfur containing compounds in model oil in just 10 min per cycle after the optimization of the reaction parameters, and up to 95% desulfurization efficiency could be achieved by six cycles of desulfurization. It is found that the addition of GO as catalyst does not increase the desulfurization performance drastically; hence, future studies for the desulfurization performance of DESs made up from ChCl and PEG and its derivatives can be done simply by using extraction desulfurization (EDS) method instead of ECODS method, for cost reduction purpose and easier regulation of DES waste into environment.


2016 ◽  
Vol 18 (3) ◽  
pp. 826-833 ◽  
Author(s):  
Xavier Marset ◽  
Juana M. Pérez ◽  
Diego J. Ramón

The synthesis of different tetrahydroisoquinolines using choline chloride : ethylene glycol as a deep eutectic solvent (DES) and copper(ii) oxide impregnated on magnetite as a catalyst has been accomplished successfully.


2019 ◽  
Vol 8 (1) ◽  
pp. 8-14 ◽  
Author(s):  
Seyed Mohammad Safieddin Ardebili ◽  
Xinyu Ge ◽  
Giancarlo Cravotto

Abstract The factors that influence microwave-assisted biodiesel production reactions have been analyzed in this investigation. The studied parameters included microwave (MW) power, irradiation time, and reactor pressure. The response surface method was used to optimize the reaction conditions. The conversion for the 6:1 methanol/oil molar ratio and 1% catalyst ranged from 68.4% to 96.71%. The optimized conditions were found to be 138 s of MW irradiation at 780 W and 7 bar pressure. The conversion at this point was 97.82%. Biodiesel yield increased at higher radiation times (90–130 s) and pressures (5–7 bar). Results show that MW power and irradiation time have significant effects at the 1% level, whereas pressure had significant effects at the 5% level on biodiesel production in this range. The major properties of the palm oil biodiesel produced herein have met the requirements of the EN 14214 methyl ester standard.


2019 ◽  
Vol 21 (31) ◽  
pp. 17200-17208 ◽  
Author(s):  
Dhawal Shah ◽  
Ulan Mansurov ◽  
Farouq S. Mjalli

Intermolecular interactions within the mixtures of DMSO and reline, a typical type III Deep Eutectic Solvent (DES), composed of urea and choline chloride, is examined along with the mixtures' physical properties.


2020 ◽  
Vol 15 (2) ◽  
pp. 1934578X1990070 ◽  
Author(s):  
Weida Zhang ◽  
Shaobo Cheng ◽  
Xiaona Zhai ◽  
Junshe Sun ◽  
Xuefang Hu ◽  
...  

Deep eutectic solvents (DESs) were proposed for the extraction of polysaccharides from Poria cocos (PCPs). Six types of DESs were prepared, and the DES composed of choline chloride and oxalic acid was proved to be suitable. Based on the results of single-factor test, the Box-Behnken experimental design with response surface methodology was carried out, giving the optimal extraction conditions including mole ratio of 1:2 (choline chloride:oxalic acid) and extraction 15 minutes at 100°C. Under the optimal extraction conditions, the extraction yield (46.24% ± 0.13%) was 8.6 times higher than that of hot water. The reusability of DES was demonstrated by a 6-run test, and an extraction yield of PCP was 38.40% ± 0.23% after reusing for 6 times without adding any additional chemicals. Moreover, molecular weight distributions of the resulting PCP were analyzed, and then mainly distributed in the range of 753 to 3578 g/mol. Therefore, DESs were proved to be an excellent extraction solvent alternative to the extraction of PCP.


Sign in / Sign up

Export Citation Format

Share Document