scholarly journals Smart Artificial Intelligence Computerized Models for Shelf Life Prediction of Processed Cheese

2012 ◽  
Vol 1 (3) ◽  
pp. 281 ◽  
Author(s):  
Sumit Goyal ◽  
Gyanendra Kumar Goyal

Linear Layer (Design) and multiple linear regression artificial intelligence computerized models were developed for predicting shelf life of processed cheese stored at 7-8C. Mean Square Error, Root Mean Square Error, Coefficient of Determination and Nash - Sutcliffo Coefficient were applied for comparing the prediction ability of the developed models. The modelling results showed excellent agreement between the experimental data and predicted values with a high determination coefficient, suggesting that the Linear Layer (Design) and MLR models are very efficient in predicting the shelf life of processed cheese stored at 7-8oC.

2012 ◽  
Vol 3 (3) ◽  
pp. 20-32 ◽  
Author(s):  
Sumit Goyal ◽  
Gyanendra Kumar Goyal

Elman artificial neural network models with single and multilayer for predicting shelf life of processed cheese stored at 7-8ºC were developed. Input parameters were: Body & texture, aroma & flavour, moisture, and free fatty acid, while sensory score was output parameter. Bayesian regularization was training algorithm for the models. The network was trained up to 100 epochs, and neurons in each hidden layers varied from 1 to 20. Transfer function for hidden layer was tangent sigmoid, while for the output layer it was pure linear function. Mean Square Error, Root Mean Square Error, Coefficient of Determination and Nash - Sutcliffo Coefficient were used for comparing the prediction ability of the developed models. Elman model with combination of 4-17-17-1 performed significantly well for predicting the shelf life of processed cheese stored at 7-8º C.


2017 ◽  
Vol 19 (4) ◽  
Author(s):  
SUMIT GOYAL ◽  
GYANENDRA KUMAR GOYAL

The aim of this research is to develop Generalized Regression Artificial Neural Network (ANN) models for predicting shelf life of processed cheese. Processed cheese is protein rich food, and is a comparable supplement to meat protein. Mean Square Error, Root Mean Square Error, Coefficient of Determination and Nash - Sutcliffe Coefficient were used in order to compare the prediction ability of the developed models. The modeling results showed that there was exceptional agreement between the experimental data and the predicted values. The model might be an alternative method to control the expiration date of processed cheese.


Author(s):  
Sandeep Samantaray ◽  
Abinash Sahoo

Accurate prediction of water table depth over long-term in arid agricultural areas are very much important for maintaining environmental sustainability. Because of intricate and diverse hydrogeological features, boundary conditions, and human activities researchers face enormous difficulties for predicting water table depth. A virtual study on forecast of water table depth using various neural networks is employed in this paper. Hybrid neural network approach like Adaptive Neuro Fuzzy Inference System (ANFIS), Recurrent Neural Network (RNN), Radial Basis Function Neural Network (RBFN) is employed here to appraisal water levels as a function of average temperature, precipitation, humidity, evapotranspiration and infiltration loss data. Coefficient of determination (R2), Root mean square error (RMSE), and Mean square error (MSE) are used to evaluate performance of model development. While ANFIS algorithm is used, Gbell function gives best value of performance for model development. Whole outcomes establish that, ANFIS accomplishes finest as related to RNN and RBFN for predicting water table depth in watershed.


Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1631
Author(s):  
Bruno Guilherme Martini ◽  
Gilson Augusto Helfer ◽  
Jorge Luis Victória Barbosa ◽  
Regina Célia Espinosa Modolo ◽  
Marcio Rosa da Silva ◽  
...  

The application of ubiquitous computing has increased in recent years, especially due to the development of technologies such as mobile computing, more accurate sensors, and specific protocols for the Internet of Things (IoT). One of the trends in this area of research is the use of context awareness. In agriculture, the context involves the environment, for example, the conditions found inside a greenhouse. Recently, a series of studies have proposed the use of sensors to monitor production and/or the use of cameras to obtain information about cultivation, providing data, reminders, and alerts to farmers. This article proposes a computational model for indoor agriculture called IndoorPlant. The model uses the analysis of context histories to provide intelligent generic services, such as predicting productivity, indicating problems that cultivation may suffer, and giving suggestions for improvements in greenhouse parameters. IndoorPlant was tested in three scenarios of the daily life of farmers with hydroponic production data that were obtained during seven months of cultivation of radicchio, lettuce, and arugula. Finally, the article presents the results obtained through intelligent services that use context histories. The scenarios used services to recommend improvements in cultivation, profiles and, finally, prediction of the cultivation time of radicchio, lettuce, and arugula using the partial least squares (PLS) regression technique. The prediction results were relevant since the following values were obtained: 0.96 (R2, coefficient of determination), 1.06 (RMSEC, square root of the mean square error of calibration), and 1.94 (RMSECV, square root of the mean square error of cross validation) for radicchio; 0.95 (R2), 1.37 (RMSEC), and 3.31 (RMSECV) for lettuce; 0.93 (R2), 1.10 (RMSEC), and 1.89 (RMSECV) for arugula. Eight farmers with different functions on the farm filled out a survey based on the technology acceptance model (TAM). The results showed 92% acceptance regarding utility and 98% acceptance for ease of use.


Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1166
Author(s):  
Bashir Musa ◽  
Nasser Yimen ◽  
Sani Isah Abba ◽  
Humphrey Hugh Adun ◽  
Mustafa Dagbasi

The prediction accuracy of support vector regression (SVR) is highly influenced by a kernel function. However, its performance suffers on large datasets, and this could be attributed to the computational limitations of kernel learning. To tackle this problem, this paper combines SVR with the emerging Harris hawks optimization (HHO) and particle swarm optimization (PSO) algorithms to form two hybrid SVR algorithms, SVR-HHO and SVR-PSO. Both the two proposed algorithms and traditional SVR were applied to load forecasting in four different states of Nigeria. The correlation coefficient (R), coefficient of determination (R2), mean square error (MSE), root mean square error (RMSE), and mean absolute percentage error (MAPE) were used as indicators to evaluate the prediction accuracy of the algorithms. The results reveal that there is an increase in performance for both SVR-HHO and SVR-PSO over traditional SVR. SVR-HHO has the highest R2 values of 0.9951, 0.8963, 0.9951, and 0.9313, the lowest MSE values of 0.0002, 0.0070, 0.0002, and 0.0080, and the lowest MAPE values of 0.1311, 0.1452, 0.0599, and 0.1817, respectively, for Kano, Abuja, Niger, and Lagos State. The results of SVR-HHO also prove more advantageous over SVR-PSO in all the states concerning load forecasting skills. This paper also designed a hybrid renewable energy system (HRES) that consists of solar photovoltaic (PV) panels, wind turbines, and batteries. As inputs, the system used solar radiation, temperature, wind speed, and the predicted load demands by SVR-HHO in all the states. The system was optimized by using the PSO algorithm to obtain the optimal configuration of the HRES that will satisfy all constraints at the minimum cost.


2021 ◽  
Vol 9 (4) ◽  
pp. 110-126
Author(s):  
Wafa Benaatou ◽  
Adnane Latif ◽  
Vicent Pla

A heterogeneous wireless network needs to maintain seamless mobility and service continuity; for this reason, we have proposed an approach based on the combination of particle swarm optimization (PSO) and an adaptive neuro-fuzzy inference system (ANFIS) to forecast a handover during a movement of a mobile terminal from a serving base station to target base station. Additionally, the handover decision is made by considering several parameters, such as peak data rate, latency, packet loss, and power consumption, to select the best network for handover from an LTE to an LTE-A network. The performance efficiency of the new hybrid approach is determined by computing different statistical parameters, such as root mean square error (RMSE), coefficient of determination (R2), mean square error (MSE), and error standard deviation (StD). The execution of the proposed approach has been performed using MATLAB software. The simulation results show that the hybrid PSO-ANFIS model has better performance than other approaches in terms of prediction accuracy and reduction of handover latency and the power consumption in the network.  


2019 ◽  
Vol 18 (3) ◽  
pp. 89-99
Author(s):  
Vinh Huy Chau ◽  
Anh Thu Vo ◽  
Ba Tuan Le

Abstract As a up and coming sport, powerlifting is gathering more and more attetion. Powerlifters vary in their strength levels and performances at different ages as well as differing in height and weight. Hence the questions arises on how to establish the relationship between age and weight. It is difficult to judge the performance of athletes by artificial expertise, as subjective factors affecting the performance of powerlifters often fail to achieve the desired results. In recent years, artificial intelligence has made groundbreaking strides. Therefore, using artificial intelligence to predict the performance of athletes is among one of many interesting topics in sports competitions. Based on the artificial intelligence algorithm, this research proposes an analysis model of powerlifters’ performance. The results show that the method proposed in this paper can predict the best performance of powerlifters. Coefficient of determination-R2=0.86 and root-mean-square error of prediction-RMSEP=20.98 demonstrate the effectiveness of our method.


Author(s):  
Anggita Rosiana Putri ◽  
Abdul Rohman ◽  
Sugeng Riyanto ◽  
Widiastuti Setyaningsih

Authentication of Patin fish oil (MIP) is essential to prevent adulteration practice, to ensure quality, nutritional value, and product safety. The purpose of this study is to apply the FTIR spectroscopy combined with chemometrics for MIP authentication. The chemometrics method consists of principal component regression (PCR) and partial least square regression (PLSR). PCR and PLSR were used for multivariate calibration, while for grouping the samples using discriminant analysis (DA) method. In this study, corn oil (MJ) was used as an adulterate. Twenty-one mixed samples of MIP and MJ were prepared with the adulterate concentration range of 0-50%. The best authentication model was obtained using the PLSR technique using the first derivative of FTIR spectra at a wavelength of 650-3432 cm-1. The coefficient of determination (R2) for calibration and validation was obtained 0.9995 and 1.0000, respectively. The value of root mean square error of calibration (RMSEC) and root mean square error of prediction (RMSEP) were 0.397 and 0.189. This study found that the DA method can group the samples with an accuracy of 99.92%.


2021 ◽  
pp. 1-10
Author(s):  
Sandra K. Hnat ◽  
Musa L. Audu ◽  
Ronald J. Triolo ◽  
Roger D. Quinn

Estimating center of mass (COM) through sensor measurements is done to maintain walking and standing stability with exoskeletons. The authors present a method for estimating COM kinematics through an artificial neural network, which was trained by minimizing the mean squared error between COM displacements measured by a gold-standard motion capture system and recorded acceleration signals from body-mounted accelerometers. A total of 5 able-bodied participants were destabilized during standing through: (1) unexpected perturbations caused by 4 linear actuators pulling on the waist and (2) volitionally moving weighted jars on a shelf. Each movement type was averaged across all participants. The algorithm’s performance was quantified by the root mean square error and coefficient of determination (R2) calculated from both the entire trial and during each perturbation type. Throughout the trials and movement types, the average coefficient of determination was 0.83, with 89% of the movements with R2 > .70, while the average root mean square error ranged between 7.3% and 22.0%, corresponding to 0.5- and 0.94-cm error in both the coronal and sagittal planes. COM can be estimated in real time for balance control of exoskeletons for individuals with a spinal cord injury, and the procedure can be generalized for other gait studies.


Atmosphere ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 43 ◽  
Author(s):  
Dariusz Młyński ◽  
Andrzej Wałęga ◽  
Andrea Petroselli ◽  
Flavia Tauro ◽  
Marta Cebulska

The aim of this study was to determine the best probability distributions for calculating the maximum annual daily precipitation with the specific probability of exceedance (Pmaxp%). The novelty of this study lies in using the peak-weighted root mean square error (PWRMSE), the root mean square error (RMSE), and the coefficient of determination (R2) for assessing the fit of empirical and theoretical distributions. The input data included maximum daily precipitation records collected in the years 1971–2014 at 51 rainfall stations from the Upper Vistula Basin, Southern Poland. The value of Pmaxp% was determined based on the following probability distributions of random variables: Pearson’s type III (PIII), Weibull’s (W), log-normal, generalized extreme value (GEV), and Gumbel’s (G). Our outcomes showed a lack of significant trends in the observation series of the investigated random variables for a majority of the rainfall stations in the Upper Vistula Basin. We found that the peak-weighted root mean square error (PWRMSE) method, a commonly used metric for quality assessment of rainfall-runoff models, is useful for identifying the statistical distributions of the best fit. In fact, our findings demonstrated the consistency of this approach with the RMSE goodness-of-fit metrics. We also identified the GEV distribution as recommended for calculating the maximum daily precipitation with the specific probability of exceedance in the catchments of the Upper Vistula Basin.


Sign in / Sign up

Export Citation Format

Share Document