Performance and Emission Characteristics of LPG as Alternative Fuel in Internal Combustion Engine: An Overview

2016 ◽  
Vol 39 (1) ◽  
pp. 21-27
Author(s):  
Manoj Kumar Saud ◽  
◽  
Dimbendra Kumar Mahanta
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Alternative Fuel ◽  
Emission Characteristics ◽  
Performance And Emission

Effect of Engine Operating Parameters on Combustion and Emission Characteristics

1992 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Operating Parameters ◽  
Emission Characteristics ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion, heat release rate and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data are compared with experimental results and show excellent agreement for peak pressure and the rate of pressure rise as a function of crank angle. The results obtained for NO and CO are also found to be in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multi-component chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

Effect of IC Engine Operating Conditions on Combustion and Emission Characteristics

1993 ◽  
Vol 115 (4) ◽  
pp. 694-701 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Operating Conditions ◽  
Emission Characteristics ◽  
Ic Engine ◽  
Pollutants Emission ◽  
Good Agreement

Numerical simulation of flow, combustion, heat release rate, and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data show that for good agreement with experimental results on the peak pressure and the rate of pressure rise as a function of crank angle, spark ignition energy and local cylinder pressure must be properly modeled. The results obtained for NO and CO showed features which are qualitatively in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multicomponent chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

Effects of Compression Ratio on Performance and Emission of Internal Combustion Engine with Used Vegetable Oil Methyl Easter

2013 ◽  
Vol 768 ◽  
pp. 250-254
Author(s):  
N. Balakrishnan ◽  
K. Mayilsamy ◽  
N. Nedunchezhian
Keyword(s):  
Internal Combustion Engine ◽  
Vegetable Oil ◽  
Compression Ratio ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Maximum Pressure ◽  
Base Line ◽  
Promising Alternative ◽  
Performance And Emission ◽  
Used Vegetable Oil

Biomass derived vegetable oil is a promising alternative fuel for an internal combustion engine. Direct use of vegetable oil has inferior performance with higher emission due to its higher viscous in nature. This can be overcome by transesterification process with its byproduct which is called as used vegetable oil methyl ester. While blending this biodiesel with fossil diesel upto maximum of 30:70, will give the higher performance and lower emission than the fossil diesel alone. In this present study biodiesel in the form of B23 is used in a four stroke water cooled variable compression ratio engine without any modifications. The performance and emission characteristics are studied with different compression ratio and compared with a base line fossil diesel mode operation. This study reveals that the compression ratio of 18 is the optimum in the view of ignition delay, maximum pressure crank angle, exhaust gas temperature and Smoke emission.

scholarly journals Effect of Gas Mixture Composition on the Parameters of an Internal Combustion Engine

10.14311/1540 ◽  
2012 ◽  
Vol 52 (3) ◽  
Author(s):  
Andrej Chríbik ◽  
Marián Polóni ◽  
Ján Lach
Keyword(s):  
Internal Combustion Engine ◽  
Alternative Fuels ◽  
Combustion Engine ◽  
Chemical Properties ◽  
Internal Combustion ◽  
Gas Mixture ◽  
Performance And Emission ◽  
Combustion Gases ◽  
Engine Simulation ◽  
The Impact

This paper deals with the use of the internal combustion piston engine, which is a drive unit for micro-cogeneration units. The introduction is a brief statement of the nature of gas mixture compositions that are useful for the purposes of combustion engines, together with the basic physical and chemical properties relevant to the burning of this gas mixture. Specifically, we will discuss low-energy gases (syngases) and mixtures of natural gas with hydrogen. The second section describes the conversion of the Lombardini LGW 702 combustion engine that is necessary for these types of combustion gases. Before the experimental measurements, a simulation in the Lotus Engine simulation program was carried out to make a preliminary assessment of the impact on the performance of an internal combustion engine. The last section of the paper presents the experimental results of partial measurements of the performance and emission parameters of an internal combustion engine powered by alternative fuels.

scholarly journals Comparative Evaluation on Combustion and Emission Characteristics of a Diesel Engine Fueled with Crude Palm Oil Blends

2021 ◽  
Vol 11 (23) ◽  
pp. 11502
Author(s):  
Jun Cong Ge ◽  
Sam Ki Yoon ◽  
Jun Hee Song
Keyword(s):  
Diesel Engine ◽  
Vegetable Oil ◽  
Palm Oil ◽  
Combustion Engine ◽  
Engine Performance ◽  
Alternative Fuel ◽  
Emission Characteristics ◽  
Crude Palm Oil ◽  
Maximum Heat ◽  
Performance And Emission

Vegetable oil as an alternative fuel for diesel engine has attracted much attention all over the world, and it is also expected to achieve the goal of global carbon neutrality in the future. Although the product after transesterification, biodiesel, can greatly reduce the viscosity compared with vegetable oil, the high production cost is one of the reasons for restricting its extensive development. In addition, based on the current research on biodiesel in diesel engines, it has been almost thoroughly investigated. Therefore, in this study, crude palm oil (CPO) was directly used as an alternative fuel to be blended with commercial diesel. The combustion, engine performance and emissions were investigated on a 4-cylinder, turbocharged, common rail direct injection (CRDI) diesel engine fueled with different diesel-CPO blends according to various engine loads. The results show that adding CPO to diesel reduces the maximum in-cylinder pressure and maximum heat release rate to 30 Nm and 60 Nm. The most noteworthy finding is that the blend fuels reduce the emissions of hydrocarbons (HC), nitrogen oxides (NOx) and smoke, simultaneously. On the whole, diesel fuel blended with 30% CPO by volume is the best mixing ratio based on engine performance and emission characteristics.

Preliminary Study on Tribological Performance of Straw Based Bio-Fuel

2007 ◽  
Author(s):  
Yufu Xu ◽  
Qiongjie Wang ◽  
Xianguo Hu ◽  
Jinsi Chen
Keyword(s):  
Internal Combustion Engine ◽  
Alternative Fuels ◽  
Combustion Engine ◽  
Frictional Coefficient ◽  
Internal Combustion ◽  
Alternative Fuel ◽  
Diesel Oil ◽  
Chemical Compositions ◽  
Extreme Pressure ◽  
Ball Surface

More and more attention has been paid to alternative fuel in internal combustion engine. One of alternative fuels is to convert straw biomass to biomass fuel. Various methods and apparatuses used for converting straw biomass to bio-fuel were invented and developed. However, alternative fuel from biomass can not be used well in internal combustion engine. The reason is complicated and relative with the separation technology of bio-fuel and corrosion, wear, lubrication and combustion chemical reaction between bio-fuel and the surface of combustion room. It is necessary to study the tribological properties of bio-fuel in order to instead the current gasoline or diesel oil in internal combustion engine in the future. In the present study, the straw based bio-oil obtained by liquidizing process was chosen to evaluate its lubrication by MQ-800 fourball tribometer, in which extreme pressure and friction coefficient and wear resistance were measured respectively. The experimental results showed that the extreme pressure of the bio-fuel was up to 392 N, and the extreme pressure of diesel oil was 333 N. The frictional coefficient of bio-fuel varies between 0.08 and 0.11. The wear scar diameter increased with load slowly in 30min. SEM images indicate that lots of thin and dense belt-like ploughs were presented on the rubbed ball surface. The chemical compositions of the worn zone on the ball surface were analyzed by XPS, the thermal property and variation of chemical compositions of bio-fuel before and after friction and wear tests were studied by TGA and GC-MS, respectively. It was shown that the rubbing surface film was composed of FeS, FeSO4 and organic compounds with C-C, −COH and −COOH groups.

Piston Geometry Design Effects on Combustion and Emission Characteristics

1991 ◽  
Author(s):  
Ashwani K. Gupta ◽  
Lu Jiang ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Combustion Engine ◽  
Effective Means ◽  
Combustion Process ◽  
Internal Combustion ◽  
Emission Characteristics ◽  
Geometry Design ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion phenomena and pollutants emission characteristics have been obtained on an internal combustion engine having conventional flat piston and advanced piston geometries. The code employed the time marching procedure that solves the governing partial differential equations of multi-component chemically reactive fluid flow by finite difference method. The transient solution is marched out in a sequence of time steps. The results show that both the piston geometry and inlet flow conditions affects the local flame properties which subsequently alters the pollutants emission levels. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for energy conservation and environmental pollution control.

Sign in / Sign up

Export Citation Format

Share Document