INVESTIGATION OF USING WASTE GLASS POWDER AS A SUPPLEMENTARY CEMENTITIOUS MATERIAL IN REACTIVE POWDER CONCRETE

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Shatha Hasan ◽  
Doaa Nayyef
Keyword(s):  
Compressive Strength ◽  
Glass Powder ◽  
Waste Glass ◽  
Reactive Powder Concrete ◽  
Concrete Aggregate ◽  
Supplementary Cementitious Material ◽  
Recycled Glass ◽  
Waste Glass Powder ◽  
Reactive Powder ◽  
Direct Tensile

Some mechanical behaviors were tested by investigations of compressive strength, and direct tensile, strength of reactive Powder concrete (RPC) containing recycled glass powder (RGP) as a supplementary, cementitious material. This study goals to survey the pozzolanic activity of recycled glass powder (RGP) up to (30%) silica fume replacement and its effect on the properties of recycled reactive powder concrete (RRPC) that made by waste glass (WG) and recycled fine concrete aggregate, which has not been investigated before. These properties contain compressive strength and direct tensile strength. Glass is principally composed of silica so that when waste glass is grind to micro particle size in RPC as a partial replacement of silica fume could be a substantial step to development of sustainable material. In this study, high strength reactive powder concrete (HSRPC) with mean compressive strength of 118.4 MPa at 28 days slightly decreased when 40% recycled fine concrete aggregate were used then the strength evolve afterward when 20% of waste glass powder WGP was utilized. The strength tests outcomes indicated that waste glass powder gave greater strength compared to ordinary reactive powder concrete.

scholarly journals Development of Environment-Friendly Concrete through Partial Addition of Waste Glass Powder (WGP) as Cement Replacement

2020 ◽  
Vol 6 (12) ◽  
pp. 2332-2343
Author(s):  
Fasih Ahmed Khan ◽  
Khan Shahzada ◽  
Qazi Sami Ullah ◽  
Muhammad Fahim ◽  
Sajjad Wali Khan ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Glass Powder ◽  
Waste Glass ◽  
Modulus Of Rupture ◽  
Partial Replacement ◽  
Supplementary Cementitious Material ◽  
Beam Elements ◽  
Pozzolanic Material ◽  
Waste Glass Powder ◽  
Study Results

This paper presents the study carried out on the utilization of Waste Glass Powder (WGP) as supplementary cementitious material in concrete. The evaluation of the influence of WGP on the mechanical properties of concrete was carried out by casting and testing of concrete samples as per ASTM standards (cylinders and beam elements). The control samples were designed to represent field conditions with a target compressive strength of 20,000 kPa. The Portland cement in concrete was substituted with WGP in proportions of 0%-35% by weight, in increments of 5%. Two curing domains were adopted in the preparation of the test samples to evaluate the effect of pozzolanic material wherein the tested samples were cured for 28, 56, and 84 days. The study results indicated a reduction in compressive strength of concrete up to 10% with partial replacement of cement with 25% of WGP when standard curing of 28 days was adopted. Furthermore, with the same replacement proportion and prolonged curing for 84 days, the gap in strength reduction was reduced by 5%. However, a significant decrease in workability was noted between the control concrete samples and glass powder infused concrete. Furthermore, the Waste Glass Powder Concrete (WGPC) exhibited an improved flexural strength with the modulus of rupture for WGPC being 2% higher than control concrete at the age of 84 days. Based on the results of this study it was concluded that 25% replacement of cement with WGP provides an optimum replacement ratio. Doi: 10.28991/cej-2020-03091620 Full Text: PDF

Utilization of Granite powder and Glass Powder in Reactive Powder Concrete: Assessment of Strength and Long Term Durability Properties

2021 ◽  
Author(s):  
Venkatesan B ◽  
Kannan V ◽  
Sophia M
Keyword(s):  
Electrical Resistivity ◽  
Glass Powder ◽  
Construction Materials ◽  
Reactive Powder Concrete ◽  
Waste Glass Powder ◽  
Chloride Migration ◽  
One Year ◽  
Granite Powder ◽  
Reactive Powder

This paper aims to assess the mechanical and long-term durability performance of Reactive Powder Concrete (RPC) containing Granite Powder (GrP) as cement replacement and waste Glass Powder (GP) as quartz sand replacement. The workability and mechanical behaviour of RPC containing various proportions of GrP and GP are assessed for different w/b ratios (0.3, 0.35, 0.4 and 0.45). The water resistance and tightness of RPC are measured by monitoring the electrical resistivity, water absorption, sorptivity and chloride migration over a one year period. Results reveal that substitution of GrP and GP at optimum levels of 15% and 30% respectively enhances the performance of RPC with the achievement of satisfiable workability at a 0.35 w/b ratio. A significant increase in the resistance towards chloride penetration and electrical resistivity was also observed with increasing ages. Thus, glass powder and granite powder can be considered as alternative construction materials providing economical and ecological efficiency.

STRENGTH OF CONCRETE MORTAR PREPARED BY PARTIAL SUBSTITUTION OF CEMENT WITH RECYCLED GLASS POWDER

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Pranshoo Solanki ◽  
Harsh Chauhan
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Crucial Role ◽  
Glass Powder ◽  
Partial Substitution ◽  
Recycled Glass ◽  
Mortar Strength ◽  
Waste Glass Powder ◽  
Flowable Fill

This experiment was conducted to determine the utility of substituting cement with the recycled glass powder (RGP) in mortar mixtures. A total of 21 mortar mixtures were produced using various RGP (FG) ratios (CG), and fly ash (FA) powders. The mortar mixtures were used to prepare cubes which were tested for 7-and 28-day compressive strength. The substitution of cement with FG and CG in mortar resulted in reduced 7-and 28-day compressive strength values. However, the amount and type of RGP substituted for cement plays a crucial role in the determination of mortar strength. Above contraction in compressive strength was observed at an initial maturity than at the final maturity. Further, replacement of cement with Fly Ash showed increase in compressive strength up to certain content. More research and testing for the optimal percentage and size of waste glass powder that can be used is required in flowable fill.

Studies on Exciting the Activity of Waste Glass Powder by Hydrothermal Activation

2013 ◽  
Vol 871 ◽  
pp. 171-178
Author(s):  
Qing Qiu Kong ◽  
Guo Jun Ke ◽  
Dan Wang
Keyword(s):  
Compressive Strength ◽  
Hydrothermal Treatment ◽  
Glass Powder ◽  
Cement Mortar ◽  
Waste Glass ◽  
Early Age ◽  
Cement Replacement ◽  
Waste Glass Powder ◽  
Temperature And Pressure ◽  
Optimal Strength

The effect of hydrothermal activation indifferent temperature and pressure conditions on the pozzolanic activity of waste glass powder was discussed. The waste glass powder was treated at 108°C, 0.15MPa, 116°C, 0.18MPa and 121°C, 0.2MPa for 2h in an autoclave respectively after milling to 4215cm2/g. Mortar was made with untreated and hydrothermal activated waste glass power replacement of cement at 20% respectively, then tested for compressive strength at 3, 7, 14 , 28 and 90 days. Results showed that compressive strength of cement mortar had varying degrees of decline when replacing cement with untreated waste glass powder, comparing to the control one. Decline amplitude was large at early age and small at late age. Activity of waste glass powder was significantly improved after hydrothermal treatment. Compressive strength of mortar improved as temperature and pressure elevated, obtaining optimal strength at 121°C, 0.2MPa. Compressive strength of mortar with hydrothermal activated glass powder was higher than that with untreated glass powder at all age with 20% cement replacement. Compressive strength increased 5.3% ~ 13.6% at 3 d, 6.8%~9.7% at 28 d, 9.7% ~ 17.7% at 90 d. The essence of hydrothermal activation was the corrosion of water in the glass.

scholarly journals Fresh, Mechanical Properties and Impact Resistance Behavior of Eco-Friend Self-Compacted Concrete

2019 ◽  
Vol 22 (3) ◽  
pp. 208-212
Author(s):  
Sheelan M. Hama ◽  
Alhareth M. Abdulghafor ◽  
Mohammed Tarrad Nawar
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Polyethylene Terephthalate ◽  
Glass Powder ◽  
Impact Resistance ◽  
Waste Glass ◽  
Slump Flow ◽  
Waste Glass Powder ◽  
Self Compact Concrete

In this work, waste glass powder from broken windows and plastic fibers from waste polyethylene terephthalate bottles are utilized to produce an economical self-compact concrete. Fresh properties (slump flow diameter, slump Flow T50, V. Funnel, L–Box), mechanical properties (Compressive strength and Flexural strength) and impact resistance of self-compact concrete are investigated. 15% waste glass powder as a partial replacement of cement with five percentages of polyethylene terephthalate plastic waste were adopted: 0% (reference), 0.5%, 0.75%, 1%, 1.25% and 1.5% by volume. It seems that the flow ability of self-compact concrete decreases with the increasing of the amount of plastic fibers. The compressive strength was increased slightly with plastic fiber content up to (0.75%), about 4.6% For more than (0.75%) plastic fiber. The compressive strength began to decrease about 15.2%. The results showed an improvement in flexural strength and an impact on the resistance in all tested specimens’ content of the plastic fibers, especially at (1.5%) fibers.

scholarly journals Behavior of sustainable Reactive Powder Concrete by Using Glass Powder as a Replacement of Cement

2022 ◽  
Vol 961 (1) ◽  
pp. 012022
Author(s):  
Zainab Majid Mohammed
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Glass Powder ◽  
Ground Glass ◽  
Major Advance ◽  
Infrastructure Development ◽  
Glass Waste ◽  
Recycled Glass ◽  
Reactive Powder

Abstract Every year, the world produces one million tons of glass garbage. Once the glass has been broken down, it is dumped in landfills, where it will remain inert for hundreds of years. glass is mainly made of silica. For long-term infrastructure development, ground glass as a partial cement substitute may be a major advance (environmentally friendly, energy-saving, and economic). Secondary calcium silicate hydrate is expected to be produced when glass waste is crushed into microscopic particles and then reacts with cement hydrate through pozzolanic interactions (C-S-H). There were experiments done on concrete utilizing (0-35 per cent) ground glass and superplasticizer, silica fume, fine sand and fibres, with the water to binder (cement + glass) ratio maintained constant for all degrees of replacement on compressive strength, modulus of elasticity and tensile strength. Steel is a fixed quantity that applies to all conceivable configurations. Concrete cube samples were made and tested for strength (28 days curing). It was discovered that the recycled glass concrete outperformed control samples in compressive strength tests. Compressive strength, tensile strength, and modulus of elasticity are all greatest in the 25 per cent glass powder. It was decided that using recycled glass trash in place of 25 per cent of the cement was a good idea because of the economic and environmental advantages.

Fabrication and Characterization the Properties of Decorative Tile from White Cement and Waste Glass Powder

2021 ◽  
Vol 894 ◽  
pp. 85-93
Author(s):  
Tanikan Thongchai ◽  
Krisana Poolsawat
Keyword(s):  
Compressive Strength ◽  
Essential Oil ◽  
Water Absorption ◽  
Glass Powder ◽  
Physical And Mechanical Properties ◽  
Waste Glass ◽  
Curing Time ◽  
White Cement ◽  
Waste Glass Powder ◽  
Orange Essential Oil

This research mainly focused on the properties of decorative white cement tiles which made from waste glass and white cement. The ratio of waste glass powder and white cement were studied at 10 : 90, 15 : 85, 20 : 80, 30 : 70, 40 : 60, 50 : 50, 60 : 40 and 70 : 30 by using water content at 30 %wt. All components were mixed and cast into the mould. Decorative white cement tiles were curing at 14, 21 and 28 days. In order to characterize physical and mechanical properties, all tiles were measured density, water absorption and compressive strength. According to the results, it can be obviously seen that density increased and water absorption decreased with increasing waste glass powder content. The highest compressive strength of around 36.5 MPa was found at 20 %wt of waste glass powder. However, compressive strength decreased with increasing waste glass powder over 20 %wt (waste glass powder 20: white cement 80). It was found that the lowest compressive strength of around 30.58 MPa was found at 70 %wt of waste glass powder. Curing time also affected properties as it was found that increasing curing time to 28 days resulted in increasing of density and compressive strength. In order to study how long does essential oil last on decorative white cement tiles, the orange essential oil at 1, 5 and 10 %wt were added into the white cement paste by using waste glass powder : white cement at 20 : 80 with 30 %wt of water. Decorative white cement tiles were smelled by 30 people every morning for 30 days and it can be found that 10 %wt of orange essential oil last longest on the decorative white cement tiles with 22 days.

Sign in / Sign up

Export Citation Format

Share Document