The Interferometer of Mach Zehnder and Its Applications

2021 ◽  
Vol 19 (8) ◽  
pp. 125-130
Author(s):  
Nawras Ali. Salman
Keyword(s):  
Optical Sensors ◽  
Fundamental Principle ◽  
Optical Switches ◽  
Interferometric Sensors ◽  
Fabry Perot ◽  
All Optical ◽  
Different Types ◽  
The Difference ◽  
Interferometric Sensor ◽  
Temperature Strain

Fiber optic interferometers have been studied extensively for sensing various physical characteristics such as temperature, strain, pressure, and refractive index. Fabry-Perot, Mach-Zehnder, Michelson, and Sagnac are the four different types. In this case, in this study, the operational principles of Mach-Zehnder interferometric sensor are examined. fabrication techniques, as well as application sectors. The technologies of interferometric sensors are described in detail to demonstrate their great potential in practical uses. Mach-Zehnder The interferometer is a device that measures the difference in phase shifts Between two coherent collimated beams. According to this fundamental Principle, various devices can be designed. Several devices, including various types of in-line MZI optical sensors, all-optical switches and modulator, can be created using this basic principle are discussed in this paper.

CHIP-SIZE WAVELENGTH DETECTORS

2007 ◽  
Vol 17 (04) ◽  
pp. 661-670 ◽  
Author(s):  
OLIVER SCHMIDT ◽  
PETER KIESEL ◽  
MICHAEL BASSLER ◽  
NOBLE JOHNSON
Keyword(s):  
Optical Sensors ◽  
Ph Value ◽  
Incident Light ◽  
Laser Cavity ◽  
Wavelength Shift ◽  
Optical Identification ◽  
Optical Output ◽  
Fabry Perot ◽  
Chip Size ◽  
Temperature Strain

Chip-size wavelength detectors are described that can resolve the spectrum of the incident light with high accuracy over a broad spectral range. The devices can be configured either as compact spectrometers or precise wavelength shift detectors. Applications that are anticipated to benefit from the spectrometers include reagentless optical identification of analytes in fluidic and aerosol samples. The wavelength shift detector is widely applicable as read-out instrument for optical sensors in which a stimulus (e.g., temperature, strain, PH-value, etc.) results in a wavelength shift of an optical output signal, examples include the interrogation system for Fiber Bragg Grating sensors, photonic crystal sensors, Fabry-Perot type sensors, and sensors in which an analyte influences a laser cavity and thereby its emission wavelength.

Hybrid buffer‐based optical packet switch with negative acknowledgment for multilevel data centers

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sumit Chandra ◽  
Shahnaz Fatima ◽  
Raghuraj Singh Suryavanshi
Keyword(s):  
Data Centers ◽  
Web Applications ◽  
Optical Switch ◽  
Contention Resolution ◽  
Multilevel Data ◽  
All Optical ◽  
Optical Buffering ◽  
Different Types ◽  
Packet Switch ◽  
Novel Design

AbstractIn the present scenario, data centers serve many functionalities like storage, transfer of data, supporting web applications, etc. In data centers, various levels of hierarchy different types of switches are required; therefore, multifunctional data centers are desired. This paper discusses a novel design for optical switch which can be placed at various levels of hierarchy. In the proposed design, multifunctionality contention resolution schemes which consider electronic and optical buffering and all-optical negative acknowledgment (AO-NACK) are considered. In buffering technologies, contending packets are stored in either in electronic RAM or in fiber delay lines. In case of the AO-NACK scheme, contending packets are blocked, and a negative acknowledgment is sent back to the transmitting node and blocked packets are retransmitted. For various considered schemes, Monte Carlo simulation have been performed, results in terms of packet loss probability are presented, and it has been found that the performance of optical buffering is much superior to electronic buffering and AO-NACK schemes. It is found that, in the AO-NACK scheme, the numbers of retransmitted packets due to contention blocking are 33,304 which can be reduced to 7, by using a small amount of buffer at each node.

scholarly journals Investigation of Color Reproduction on Linen Fabrics when Printing with Mimaki TX400-1800D Inkjet with Pigment TP250 Dyes

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 354
Author(s):  
Tim Tofan ◽  
Rimantas Stonkus ◽  
Raimondas Jasevičius
Keyword(s):  
Mechanical Properties ◽  
Color Reproduction ◽  
Related Effect ◽  
Color Characteristics ◽  
Fabric Density ◽  
Different Types ◽  
The Difference ◽  
Printing Parameters ◽  
Linen Fabric

The aim of this research is to investigate related effect of dyeability to linen textiles related to different printing parameters. The study investigated the change in color characteristics when printing on linen fabrics with an inkjet MIMAKI Tx400-1800D printer with pigmented TP 250 inks. The dependence of color reproduction on linen fabrics on the number of print head passes, number of ink layers to be coated, linen fabric density, and different types of linen fabric was investigated. All this affects the quality of print and its mechanical properties. The change in color characteristics on different types of linen fabrics was determined experimentally. We determine at which print settings the most accurate color reproduction can be achieved on different linen fabrics. The difference between the highest and the lowest possible number of head passages was investigated. The possibilities of reproducing different linen fabric colors were determined.

scholarly journals Low-energy optical switching of SO2 linkage isomerisation in single crystals of a ruthenium-based coordination complex

RSC Advances ◽  
2021 ◽  
Vol 11 (22) ◽  
pp. 13183-13192
Author(s):  
Jacqueline M. Cole ◽  
David J. Gosztola ◽  
Sven O. Sylvester
Keyword(s):  
Single Crystals ◽  
Optical Sensors ◽  
Optical Switching ◽  
Optical Switches ◽  
Low Energy ◽  
Coordination Complex ◽  
Wide Range

Single crystals that behave as optical switches are desirable for a wide range of applications, from optical sensors to read–write memory media.

scholarly journals Evaluation of Wear Behaviour in Metallic Binders Employed in Diamond Tools for Cutting Stone

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3988
Author(s):  
Fátima Ternero ◽  
Pedro M. Amaral ◽  
Jorge Cruz Fernandes ◽  
Luís Guerra Rosa
Keyword(s):  
Wear Behavior ◽  
Wear Behaviour ◽  
Empirical Expression ◽  
Testing Conditions ◽  
Diamond Tools ◽  
Test Methodology ◽  
Different Types ◽  
Stone Material ◽  
The Difference ◽  
Wear Tests

A type of disc-on-plate test methodology was used to determine the wear behavior of metallic binders employed in the manufacturing of diamond impregnated tools. The disc consists of a special circular wheel that allows the binder materials alone (i.e., without diamond, but sintered under conditions identical to those of the complete tool) to be tested against a plate of stone material under pre-determined testing conditions. The testing conditions are intended to be equivalent to those used in the industrial processes. Using plates of five types of granite and one type of marble, this work comprises wear tests of 15 different types of metallic binders and two sintering modes conducted under, at least, three different values of contact-force. The analysis of the results demonstrated that the wear of the binders can be related to their mechanical properties through an empirical expression. The larger the difference between the characteristics of the tribological pair (binder versus stone), the higher is the correlation between the experimental wear data and the values given by the empirical expression. The relationships presented in this work allow predicting the wear behavior of the binder, and therefore may help in the design process of diamond tools. There was a clear difference between the wear behavior of metallic binders when they were employed against the two main classes of stone under analysis (marble and granite).

Sign in / Sign up

Export Citation Format

Share Document