scholarly journals Model Sistem Monitoring pH dan Kekeruhan pada Akuarium Air Tawar berbasis Internet of Things

METANA ◽  
2019 ◽  
Vol 15 (2) ◽  
pp. 49-56
Author(s):  
Dista Yoel Tadeus ◽  
Khasnan Azazi ◽  
Didik Ariwibowo
Keyword(s):  
Internet Of Things ◽  
Monitoring System ◽  
Aquatic Vegetation ◽  
Ph Value ◽  
Low Cost ◽  
Environmental Parameters ◽  
Ornamental Fish ◽  
Automation System ◽  
Water Turbidity ◽  
Air Filter

Ikan hias dan vegetasi air memiliki rentang toleransi terhadap nilai parameter lingkungan. Parameter tersebut hendaknya senantiasa diawasi demi kelangsungan hidupnya. Internet of Things (IoT) telah dimanfaatkan sebagai sistem monitoring dan otomasi parameter lingkungan ikan dan vegetasi air namun sistem ini membutuhkan biaya yang tinggi. Tujuan penelitian ini adalah mengembangkan suatu model sistem monitoring berbasis IoT berbiaya rendah untuk memberikan informasi parameter pH dan kekeruhan air setiap saat kepada pemilik ikan hias. Sistem ini dibangun menggunakan komponen opensource dan sensor berbiaya rendah. Data monitoring digunakan untuk mengaktifkan aktuator berupa filter air. Filter akan aktif apabila tingkat kekeruhan air sudah melebihi batas kekeruhan yang ditentukan. Pengujian kekeruhan air aquarium menunjukkan saat kekeruhan mencapai 3000 ntu pukul 14.12 pompa aktif dan filter bekerja sampai kekeruhan berada pada nilai 498 ntu pada pukul 17.00 dan pompa mati secara otomatis. Nilai pH dan kekeruhan air berhasil ditampilkan dengan baik di aplikasi Blynk pada ponsel. Hasil pengujian menyimpulkan bahwa sistem monitoring yang dikembangkan telah berhasil diimplementasikan dengan baik.  Ornamental fish and aquatic vegetation have a tolerance range of environmental parameter values. These parameters should always be monitored for survival. Internet of Things (IoT) has been utilized as a monitoring and automation system for environmental parameters of fish and aquatic vegetation, but this system requires high costs. The purpose of this study is to develop a low-cost IoT-based monitoring system model to provide information on pH parameters and water turbidity at any time to ornamental fish owners. This system is built using opensource components and low-cost sensors. Monitoring data is used to activate the actuator in the form of a water filter. The filter will active if the turbidity level of water has exceeded the specified turbidity limit. The aquarium water turbidity test showed that when the turbidity reached 3000 ntu at 14.12 the pump was active and the filter worked until the turbidity was at 498 ntu at 17.00 and the pump automatically shut down. The pH value and the turbidity of the water were successfully displayed in the Blynk application on the cellphone. The test results concluded that the monitoring system developed was successfully implemented. 

Design of Agricultural Environmental Parameters Monitoring System Based on Internet of Things

2014 ◽  
Vol 608-609 ◽  
pp. 1115-1119 ◽  
Author(s):  
Li Fang Zhang
Keyword(s):  
Internet Of Things ◽  
Monitoring System ◽  
Ph Value ◽  
Irrigation System ◽  
Water Environment ◽  
Environmental Parameters ◽  
Co2 Concentration ◽  
Crop Water ◽  
Foreign Products ◽  
Intelligent Irrigation

The paper study on the architecture of monitoring system in the field of agricultural environmental based on Internet of things that can achieve real-time online monitoring on more growth morphology of plant, air temperature, humidity, soil moisture, light intensity and CO2 concentration, pH value and crop water environment multi parameter. In this paper, using the CC2430, intelligent irrigation system was designed and implemented according to the actual needs of the decision-making and management of plant irrigation. The system cost compared to similar foreign products decreased 44.8%. Compared with traditional irrigation methods, crop water use efficiency is 22.6%.

scholarly journals Sensor Based Automatic Neonate Respiration Monitoring System

2019 ◽  
Vol 9 (2) ◽  
pp. 1296-1299
Keyword(s):  
Heart Rate ◽  
Internet Of Things ◽  
Monitoring System ◽  
Respiratory System ◽  
Medical Information ◽  
Low Cost ◽  
Research Work ◽  
Breathing Rate ◽  
Flow Sensors ◽  
Respiration Monitoring

This research work aims to create awareness and monitor the breath rate of a neonate using the air flow sensors and to reduce the number of infants’ death. It is designed based on the Arduino which is open-source electronics platform for hardware and software use. This prototype is developed for reliable and efficient baby monitoring system and play as infant care and monitoring system.A cardio respiratory system is used to monitor the infant’s heart rate, rhythm, breathing rate and other relevant and useful medical information using Electro Cardio Graph (ECG) and other IoT (Internet of Things) devices.This research work proved that the respiration monitoring system for infants can be implemented at low cost and also can prevent the respiration failure deaths.

scholarly journals IOTFlood: hardware and software platform using internet of things to monitor floods in real time

2021 ◽  
Vol 16 (4) ◽  
pp. 1
Author(s):  
Francisco Vital Da Silva Júnior ◽  
Mônica Ximenes Carneiro Da Cunha ◽  
Marcílio Ferreira De Souza Júnior
Keyword(s):  
Internet Of Things ◽  
Real Time ◽  
Monitoring System ◽  
Research Design ◽  
Open Source Software ◽  
Low Cost ◽  
Sensor Data ◽  
Software Platform ◽  
Web Interface ◽  
Iot Platform

Floods are responsible for a high number of human and material losses every year. Monitoring of river levels is usually performed with radar and pre-configured sensors. However, a major flood can occur quickly. This justifies the implementation of a real-time monitoring system. This work presents a hardware and software platform that uses Internet of Things (IoTFlood) to generate flood alerts to agencies responsible for monitoring by sending automatic messages about the situation of rivers. Research design involved laboratory and field scenarios, simulating floods using mockups, and later tested on the Mundaú River, state of Alagoas, Brazil, where flooding episodes have already occurred. As a result, a low-cost, modular and scalable IoT platform was achieved, where sensor data can be accessed through a web interface or smartphone, without the need for existing infrastructure at the site where the IOTFlood solution was installed using affordable hardware, open source software and free online services for the viewing of collected data.

Research and Design of Forest Environment Monitoring System

2012 ◽  
Vol 518-523 ◽  
pp. 1592-1596
Author(s):  
Jun Wang ◽  
Xue Wen He ◽  
Peng Ju He
Keyword(s):  
Monitoring System ◽  
Low Cost ◽  
Implementation Process ◽  
Environmental Parameters ◽  
Sensor Nodes ◽  
Forest Environment ◽  
Gateway Node ◽  
Protocol Conversion ◽  
Environmental Monitoring System ◽  
Wide Range

A forest environmental monitoring system based on GPRS communication network and ZigBee sensor network was researched and designed. The article described the architecture of the system, also discussed the framework of the sensor nodes using CC2430 as main chip and the gateway node based on MC35i.The data collection of sensor nodes, the protocol conversion of gateway node, and the implementation process of the monitoring center software were introduced in the article. With advantages of low cost, strong robustness and always online, the system can be widely used in a wide range for forest environmental parameters monitoring.

scholarly journals Raspberry Pi-Based Farming Automation and Monitoring System using Automatic Weather System (AWS) (Case Study: Chili Plants)

2018 ◽  
Vol 7 (4.44) ◽  
pp. 172
Author(s):  
Erfan Rohadi ◽  
Raka Admiral Abdurrahman ◽  
Ekojono . ◽  
Rosa Andrie Asmara ◽  
Indrazno Siradjuddin ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Monitoring System ◽  
Raspberry Pi ◽  
The Internet ◽  
Automation System ◽  
Process Data ◽  
Weather System ◽  
Internet Connectivity ◽  
The Internet Of Things

Recently, The Internet of Things (IoT) has been implemented and become an interesting topic for discussion. IoT is a method that aims to maximize the benefits of Internet connectivity to transfer and process data or information through an internet network wirelessly, virtual and autonomous. One of the IoT's utilization is automation system. The automation system generally uses a timer for the plant watering process. The use of timers aims to water the plants routinely without human assistance. The development of this automation system begins with the making of the prototype of chili land in the field 5 x 2.5 meters, then compile the required components and how it works. Further programming of sensors to Raspberry Pi as a controller in the system based on the conditions that have been set and changes in temperature received by the sensor. As a result, the system has been successfully done automatic watering, both on a regular basis (at 06.00 and 18.00) and cooling watering. Cooling is done if the temperature exceeds more than 30 degrees Celsius. The automation system promises to be applied to the utilization of land around the house.  

Application of WeChat Mini-Program and Wi-Fi SoC in Agricultural IoT: A Low-Cost Greenhouse Monitoring System

2020 ◽  
Vol 63 (2) ◽  
pp. 325-337
Author(s):  
Lei Zhou ◽  
Zhengjun Qiu ◽  
Yong He
Keyword(s):  
Internet Of Things ◽  
Monitoring System ◽  
High Performance ◽  
Low Cost ◽  
Rapid Development ◽  
Sensor Nodes ◽  
Sensor Data ◽  
Smart Devices ◽  
Increasing Demand ◽  
On Chip

HighlightsA quick solution for developing and deploying custom agricultural IoT systems is proposed.Low-cost and high-performance devices are used for the design of sensor nodes.A mobile application based on WeChat Mini-Program is developed for device and data management.The proposed system brings convenience to both users and developers.Abstract. Increasing demand for automatic management of agricultural production and real-time remote monitoring has increased the need for smart devices, wireless technologies, and sensors. The internet of things (IoT) has emerged as a common technology for the management of multiple devices by multiple users. Some professional solutions are relatively difficult to implement for researchers who are interested in agricultural IoT but do not have requisite skills in computers and electronics. The unfriendliness of the user software limits the practical application of agricultural IoT in China. This article presents a simple solution based on an SoC (system-on-chip) and WeChat mini-program that focuses on low-cost hardware, rapid development, user-friendly application design, and helping developers get a quick start in building a DIY monitoring system. The ESP8266, a high-performance SoC, is used as the microcontroller and Wi-Fi module to transfer the sensor data to a remote server. A WeChat mini-program provides the graphical user interface, enabling users to manage devices and access data by clicking. Users can log into the system using their WeChat accounts and bind devices by scanning QR codes on the devices. Thus, the complex management and device binding in conventional systems can be overcome. The system is easy to be expand and has great potential for greenhouse environmental monitoring in China. Keywords: Greenhouse ambient monitoring, Internet of things, WeChat mini-program, Wi-Fi SoC.

scholarly journals An open source Real Time IOT based environmental sensor monitoring system

10.29007/q4cf ◽  
2018 ◽  
Author(s):  
Ronak Vithlani ◽  
Siddharth Fultariya ◽  
Mahesh Jivani ◽  
Haresh Pandya
Keyword(s):  
Embedded System ◽  
Open Source ◽  
Real Time ◽  
Monitoring System ◽  
Information Structure ◽  
Low Cost ◽  
Environmental Parameters ◽  
Test Bed ◽  
Network Construction ◽  
Embedded Sensing

In this paper, we have described an operative prototype for Internet of Things (IoT) used for consistent monitoring various environmental sensors by means of low cost open source embedded system. The explanation about the unified network construction and the interconnecting devices for the consistent measurement of environmental parameters by various sensors and broadcast of data through internet is being presented. The framework of the monitoring system is based on a combination of embedded sensing units, information structure for data collection, and intellectual and context responsiveness. The projected system does not involve a devoted server computer with respect to analogous systems and offers a light weight communication protocol to monitor environment data using sensors. Outcomes are inspiring as the consistency of sensing information broadcast through the projected unified network construction is very much reliable. The prototype was experienced to create real-time graphical information rather than a test bed set-up.

Sign in / Sign up

Export Citation Format

Share Document