In-vivo Micro-CT Evaluation on the Bone Regeneration in Rat Calvaria by PLA Membrane

2012 ◽  
Keyword(s):  
Bone Regeneration ◽  
Micro Ct ◽  
Rat Calvaria ◽  
Ct Evaluation

scholarly journals An In Vivo 3D Micro-CT Evaluation of Tooth Movement After the Application of Different Force Magnitudes in Rat Molar

2009 ◽  
Vol 79 (4) ◽  
pp. 703-714 ◽  
Author(s):  
Carmen Gonzales ◽  
Hitoshi Hotokezaka ◽  
Yoshinori Arai ◽  
Tadashi Ninomiya ◽  
Junya Tominaga ◽  
...  
Keyword(s):  
Tooth Movement ◽  
Three Dimensional ◽  
Element Model ◽  
Longitudinal Change ◽  
Micro Ct ◽  
Linear Measurements ◽  
Center Of Rotation ◽  
Ct Evaluation ◽  
Space Width

Abstract Objective: To investigate the precise longitudinal change in the periodontal ligament (PDL) space width and three-dimensional tooth movement with continuous-force magnitudes in living rats. Materials and Methods: Using nickel-titanium closed-coil springs for 28 days, 10-, 25-, 50-, and 100-g mesial force was applied to the maxillary left first molars. Micro-CT was taken in the same rat at 0, 1, 2, 3, 10, 14, and 28 days. The width of the PDL was measured in the pressure and tension sides from 0 to 3 days. Angular and linear measurements were used to evaluate molar position at day 0, 10, 14, and 28. The finite element model (FEM) was constructed to evaluate the initial stress distribution, molar displacement, and center of rotation of the molar. Results: The initial evaluation of PDL width showed no statistical differences among different force magnitudes. Tooth movement was registered 1 hour after force application and gradually increased with time. From day 10, greater tooth movement was observed when 10 g of force was applied. The FEM showed that the center of rotation in the molar is located in the center of five roots at the apical third of the molar roots. Conclusion: The rat's molar movement mainly consists of mesial tipping, extrusion of distal roots, intrusion of mesial root, palatal inclination, and mesial rotation. Although the initial tooth movement after the application of different force magnitudes until day 3 was not remarkably different, 10 g of force produced more tooth movement compared with heavier forces at day 28.

scholarly journals Longitudinal in vivo evaluation of bone regeneration by combined measurement of multi-pinhole SPECT and micro-CT for tissue engineering

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Philipp S. Lienemann ◽  
Stéphanie Metzger ◽  
Anna-Sofia Kiveliö ◽  
Alain Blanc ◽  
Panagiota Papageorgiou ◽  
...  
Keyword(s):  
Computed Tomography ◽  
High Resolution ◽  
Bone Formation ◽  
Bone Regeneration ◽  
Bone Defects ◽  
Histological Evaluation ◽  
Biological Processes ◽  
Micro Ct ◽  
Pinhole Spect

Abstract Over the last decades, great strides were made in the development of novel implants for the treatment of bone defects. The increasing versatility and complexity of these implant designs request for concurrent advances in means to assess in vivo the course of induced bone formation in preclinical models. Since its discovery, micro-computed tomography (micro-CT) has excelled as powerful high-resolution technique for non-invasive assessment of newly formed bone tissue. However, micro-CT fails to provide spatiotemporal information on biological processes ongoing during bone regeneration. Conversely, due to the versatile applicability and cost-effectiveness, single photon emission computed tomography (SPECT) would be an ideal technique for assessing such biological processes with high sensitivity and for nuclear imaging comparably high resolution (<1 mm). Herein, we employ modular designed poly(ethylene glycol)-based hydrogels that release bone morphogenetic protein to guide the healing of critical sized calvarial bone defects. By combined in vivo longitudinal multi-pinhole SPECT and micro-CT evaluations we determine the spatiotemporal course of bone formation and remodeling within this synthetic hydrogel implant. End point evaluations by high resolution micro-CT and histological evaluation confirm the value of this approach to follow and optimize bone-inducing biomaterials.

scholarly journals Erratum: Longitudinal in vivo evaluation of bone regeneration by combined measurement of multi-pinhole SPECT and micro-CT for tissue engineering

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Philipp S. Lienemann ◽  
Stéphanie Metzger ◽  
Anna-Sofia Kiveliö ◽  
Alain Blanc ◽  
Panagiota Papageorgiou ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Regeneration ◽  
Micro Ct ◽  
In Vivo Evaluation ◽  
Pinhole Spect

scholarly journals Longitudinal in vivo micro-CT-based approach allows spatio-temporal characterization of fracture healing patterns and assessment of biomaterials in mouse femur defect models

2020 ◽  
Author(s):  
Esther Wehrle ◽  
Duncan C Tourolle né Betts ◽  
Gisela A Kuhn ◽  
Erica Floreani ◽  
Malavika H Nambiar ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Healing Process ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Collagen Scaffolds ◽  
Non Union ◽  
Spatio Temporal ◽  
Large Bone

AbstractThorough preclinical evaluation of novel biomaterials for treatment of large bone defects is essential prior to clinical application. Using in vivo micro-computed tomography (micro-CT) and mouse femoral defect models with different defect sizes, we were able to detect spatio-temporal healing patterns indicative of physiological and impaired healing in three defect sub-volumes and the adjacent cortex. The time-lapsed in vivo micro-CT-based approach was then applied to evaluate the bone regeneration potential of biomaterials using collagen and BMP-2 as test materials. Both collagen and BMP-2 treatment led to distinct changes in bone turnover in the different healing phases. Despite increased periosteal bone formation, 87.5% of the defects treated with collagen scaffolds resulted in non-unions. Additional BMP-2 application significantly accelerated the healing process and increased the union rate to 100%. This study further shows potential of time-lapsed in vivo micro-CT for capturing spatio-temporal deviations preceding non-union formation and how this can be prevented by application of biomaterials.This study therefore supports the application of longitudinal in vivo micro-CT for discrimination of normal and disturbed healing patterns and for the spatio-temporal characterization of the bone regeneration capacity of biomaterials.

scholarly journals Comparative bone regeneration study of hardystonite and hydroxyapatite as filler in critical-sized defect of rat calvaria

RSC Advances ◽  
2017 ◽  
Vol 7 (60) ◽  
pp. 37522-37533 ◽  
Author(s):  
Kunal Khanna ◽  
Amit Jaiswal ◽  
Rohit V. Dhumal ◽  
Nilakash Selkar ◽  
Pradip Chaudhari ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Bone Healing ◽  
Bone Grafts ◽  
Skull Defect ◽  
Defect Model ◽  
Rat Calvaria ◽  
Ceramic Hydroxyapatite ◽  
Regeneration Study ◽  
Critical Sized Defect

Bone grafts made from nanofibrous polycaprolactone loaded with bone-mimicking ceramic hydroxyapatite or hardystonite showed efficient bone healing in an in vivo rat skull defect model.

scholarly journals Plain and Stromal Cells Seeded Collagen Nanofibers Promote Bone Regeneration In vivo. A Rat Calvaria Defect Model

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
Bou-Akl Therese ◽  
Wu Bin ◽  
Daly-Seiler Conor ◽  
Dietz Paula ◽  
Ren Weiping ◽  
...  
Keyword(s):  
Bone Regeneration ◽  
Stromal Cells ◽  
Defect Model ◽  
Rat Calvaria

In Vivo Osteogenic Effect of Porous β- CaSiO3/PDLGA Composite Scaffolds

2013 ◽  
Vol 647 ◽  
pp. 94-97
Author(s):  
Chen Wang ◽  
Kai Li Lin ◽  
Jiang Chang ◽  
Jiao Sun
Keyword(s):  
Bone Regeneration ◽  
Tissue Regeneration ◽  
Potential Application ◽  
Micro Ct ◽  
Hard Tissue ◽  
Composite Scaffolds ◽  
Biological Behaviour ◽  
Ct Technology ◽  
Osteogenic Effect

The aim of the present study is to evaluate the in vivo biological behaviour of porous β-CS/PDLGA scaffolds. The scaffolds were implanted in critical-sized femur defects ( 6 ×10 mm) for 4, 12 and 20 weeks with β-TCP scaffolds as the control. The in vivo bone regeneration of the scaffolds were investigated using sequential histological evaluations and Micro-CT technology. Results showed that the β-CS/PDLGA scaffolds could stimulate bone regeneration and degrade progressively at a rate proportionate with the regeneration of new bone as compared with β-TCP scaffolds. The present study suggested the potential application of β-CS/PDLGA scaffolds in hard tissue regeneration.

scholarly journals In Vivo Bone Regeneration Induced by a Scaffold of Chitosan/Dicarboxylic Acid Seeded with Human Periodontal Ligament Cells

2019 ◽  
Vol 20 (19) ◽  
pp. 4883 ◽  
Author(s):  
Teerawat Sukpaita ◽  
Suwabun Chirachanchai ◽  
Pornchanok Suwattanachai ◽  
Vincent Everts ◽  
Atiphan Pimkhaokham ◽  
...  
Keyword(s):  
Gene Expression ◽  
Bone Formation ◽  
Dicarboxylic Acid ◽  
Bone Regeneration ◽  
Periodontal Ligament ◽  
Periodontal Ligament Cells ◽  
Micro Ct ◽  
New Bone Formation ◽  
Calvarial Defects

Chitosan/dicarboxylic acid (CS/DA) scaffold has been developed as a bone tissue engineering material. This study evaluated a CS/DA scaffold with and without seeded primary human periodontal ligament cells (hPDLCs) in its capacity to regenerate bone in calvarial defects of mice. The osteogenic differentiation of hPDLCs was analyzed by bone nodule formation and gene expression. In vivo bone regeneration was analyzed in mice calvarial defects. Eighteen mice were divided into 3 groups: one group with empty defects, one group with defects with CS/DA scaffold, and a group with defects with CS/DA scaffold and with hPDLCs. After 6 and 12 weeks, new bone formation was assessed using microcomputed tomography (Micro-CT) and histology. CS/DA scaffold significantly promoted in vitro osteoblast-related gene expression (RUNX2, OSX, COL1, ALP, and OPN) by hPDLCs. Micro-CT revealed that CS/DA scaffolds significantly promoted in vivo bone regeneration both after 6 and 12 weeks (p < 0.05). Histological examination confirmed these findings. New bone formation was observed in defects with CS/DA scaffold; being similar with and without hPDLCs. CS/DA scaffolds can be used as a bone regenerative material with good osteoinductive/osteoconductive properties.

scholarly journals Spatio-temporal characterization of fracture healing patterns and assessment of biomaterials by time-lapsed in vivo micro-computed tomography

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Esther Wehrle ◽  
Duncan C. Tourolle né Betts ◽  
Gisela A. Kuhn ◽  
Erica Floreani ◽  
Malavika H. Nambiar ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Bone Regeneration ◽  
Healing Process ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Collagen Scaffolds ◽  
Non Union ◽  
Spatio Temporal

AbstractThorough preclinical evaluation of functionalized biomaterials for treatment of large bone defects is essential prior to clinical application. Using in vivo micro-computed tomography (micro-CT) and mouse femoral defect models with different defect sizes, we were able to detect spatio-temporal healing patterns indicative of physiological and impaired healing in three defect sub-volumes and the adjacent cortex. The time-lapsed in vivo micro-CT-based approach was then applied to evaluate the bone regeneration potential of functionalized biomaterials using collagen and bone morphogenetic protein (BMP-2). Both collagen and BMP-2 treatment led to distinct changes in bone turnover in the different healing phases. Despite increased periosteal bone formation, 87.5% of the defects treated with collagen scaffolds resulted in non-unions. Additional BMP-2 application significantly accelerated the healing process and increased the union rate to 100%. This study further shows potential of time-lapsed in vivo micro-CT for capturing spatio-temporal deviations preceding non-union formation and how this can be prevented by application of functionalized biomaterials. This study therefore supports the application of longitudinal in vivo micro-CT for discrimination of normal and disturbed healing patterns and for the spatio-temporal characterization of the bone regeneration capacity of functionalized biomaterials.

Sign in / Sign up

Export Citation Format

Share Document