scholarly journals Numerical Modelling Of Humid Air Flow Around A Porous Body

2015 ◽  
Vol 9 (3) ◽  
pp. 161-166
Author(s):  
Aneta Bohojło-Wiśniewska
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Porous Medium ◽  
Numerical Modelling ◽  
Chinese Cabbage ◽  
Air Flow ◽  
Transfer Model ◽  
Humid Air ◽  
Ansys Fluent ◽  
Complex Heat Transfer

Summary This paper presents an example of humid air flow around a single head of Chinese cabbage under conditions of complex heat transfer. This kind of numerical simulation allows us to create a heat and humidity transfer model between the Chinese cabbage and the flowing humid air. The calculations utilize the heat transfer model in porous medium, which includes the temperature difference between the solid (vegetable tissue) and fluid (air) phases of the porous medium. Modelling and calculations were performed in ANSYS Fluent 14.5 software.

scholarly journals The study of the numerical diffusion in computational calculation

2020 ◽  
Vol 310 ◽  
pp. 00039
Author(s):  
Kamila Kotrasova ◽  
Vladimira Michalcova
Keyword(s):  
Heat Transfer ◽  
Differential Equation ◽  
Numerical Simulation ◽  
Continuity Equation ◽  
Cfd Simulation ◽  
Flow Process ◽  
Ansys Fluent ◽  
Numerical Diffusion ◽  
Mesh Density ◽  
Computational Calculation

The numerical simulation of flow process and heat transfer phenomena demands the solution of continuous differential equation and energy-conservation equations coupled with the continuity equation. The choosing of computation parameters in numerical simulation of computation domain have influence on accuracy of obtained results. The choose parameters, as mesh density, mesh type and computation procedures, for the numerical diffusion of computation domain were analysed and compared. The CFD simulation in ANSYS – Fluent was used for numerical simulation of 3D stational temperature flow of the computation domain.

Numerical Simulation of Temperature Field on Different Surface Structure of Bicycle Brake Pairs

2014 ◽  
Vol 697 ◽  
pp. 235-238
Author(s):  
Gang Wu ◽  
Can Chao Huang ◽  
Hong Ling Qin ◽  
Chun Hua Zhao
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Surface Structure ◽  
Surface Structures ◽  
Temperature Fields ◽  
Transfer Model ◽  
Pair Model ◽  
Layer Composite ◽  
Positive Effect ◽  
Heat Loads

Using the basic principle of heat transfer, tribology and numerical simulation, a two-dimensional heat transfer model of the three-layer composite brake pair materials were established. The temperature fields of brake pairs during the process of friction were analyzed. Applied given heat loads at different time node on the brake pair model, the temperatures of different bicycle brake pairs were compared and analyzed. Results show that the improved surface structures of brake pair have positive effect on decreasing the temperature of contact areas than that of ordinary surface structure.

scholarly journals Group Invariant Solutions for Flow and Heat Transfer of Power-Law Nanofluid in a Porous Medium

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Saba Javaid ◽  
Asim Aziz
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Power Law ◽  
Internal Heat ◽  
Shear Thickening ◽  
Internal Heat Source ◽  
Heat Transfer Model ◽  
Transfer Model ◽  
Flow And Heat Transfer ◽  
Power Law Nanofluid

The present work covers the flow and heat transfer model for the power-law nanofluid in the presence of a porous medium over the penetrable plate. The flow is caused by the impulsive movement of the plate embedded in Darcy’s type porous medium. The flow and heat transfer model has been examined with the effect of linear thermal radiation and the internal heat source or sink in the flow regime. The Rosseland approximation is utilized for the optically thick nanofluid. To form the closed-form solutions for the governing partial differential equations of conservation of mass, momentum, and energy, the Lie symmetry analysis is used to get the reductions of governing equations and to find the group invariants. These invariants are then utilized to obtain the exact solution for all three cases, i.e., shear thinning fluid, Newtonian fluid, and shear thickening fluid. In the end, all solutions are plotted for the cu -water nanofluid and discussed briefly for the different emerging flow and heat transfer parameters.

Heat Transfer Model and Analysis of Oil-Immersed Electrical Transformers with Heat Pipe Radiator

2012 ◽  
Vol 516-517 ◽  
pp. 312-315
Author(s):  
Guang Hua Li ◽  
Hong Lei Liu ◽  
De Jian Wang
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Temperature Field ◽  
Heat Pipe ◽  
Heat Transfer Model ◽  
Transfer Model ◽  
Cooling Device ◽  
Transformer Design ◽  
Electrical Transformers ◽  
Good Agreement

This paper has formulated a heat transfer model for analyzing the cooling properties of a heat pipe cooling device of oil-immersed electrical transformer. Based on the model, the oil temperature field of a 30 KVA oil-immersed transformer has been numerical simulated, and experiments also had been conducted. Results showed that the numerical simulation has good agreement with experiment results. Results also showed that heat pipe radiator is feasible for oil-immersed electrical transformer cooling. The model can be used to analyze the oil temperature distribution properties in an oil-immersed electrical transformer with heat pipe cooling device, and provide theoretical guide for transformer design and improvement.

scholarly journals Comparison of RANS and scale-resolving approaches when modelling the turbulent flow behind a bluff body

2019 ◽  
Vol 196 ◽  
pp. 00036
Author(s):  
Svetlana V. Pogudalina ◽  
Natalya N. Fedorova ◽  
Svetlana A. Valger
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Numerical Calculation ◽  
Turbulent Flow ◽  
Bluff Body ◽  
Air Flow ◽  
Ansys Fluent ◽  
Fluent Software

In this paper, the results of a numerical simulation of the air flow in the vicinity of a parallelepiped fixed on a plate are presented. The 3D calculations were performed with the ANSYS Fluent software using scale-resolving DES approach. The obtained results are compared with the experimental data and with the results of the previous numerical calculation.

Numerical Simulation of Electrohydrodynamic (EHD) Atomization in the Cone-Jet Mode

2013 ◽  
Vol 325-326 ◽  
pp. 180-185 ◽  
Author(s):  
Abdolkarim Najjaran ◽  
Reza Ebrahimi ◽  
Morteza Rahmanpoor ◽  
Ahmad Najjaran
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Ambient Temperature ◽  
Deposition Rate ◽  
Low Cost ◽  
High Deposition Rate ◽  
Deposition Technique ◽  
Enhanced Heat Transfer ◽  
Ansys Fluent ◽  
Set Up

Electrohydrodynamic (EHD) has been applied in many areas, such as EHD atomization, EHD enhanced heat transfer, EHD pump, electrospray nanotechnology, etc. EHD atomization is a promising materials deposition technique as it allows uniform and regular deposition, and offers a range of other advantages, such as low cost compared with other current techniques, easy set-up, high deposition rate, and ambient temperature. Simulation is carried out using ANSYS FLUENT system. The approach in this work was to simultaneously solve the coupled (EHD) and electrostatic equations. The fields of velocities and pressure, as well as electric characteristics of EHD flows, are calculated. The model does not include a droplet break-up model.

Sign in / Sign up

Export Citation Format

Share Document