Noun-Noun sequences and the complement-modifier distinction: a corpus-based study

2013 ◽  
Vol 9 (1) ◽  
pp. 71-107
Author(s):  
Carmen Portero Muñoz
Keyword(s):  
Relative Frequency ◽  
Head Position ◽  
Point Of View ◽  
Similar Degree ◽  
Combination Frequency ◽  
Food Shopping ◽  
Different Types ◽  
Thematic Relation ◽  
Corpus Data ◽  
Reliable Basis

AbstractThe aim of this paper is to question the relevance of the complement-modifier distinction in Noun-Noun sequences. It will be argued that neither syntactic nor semantic criteria provide a completely reliable basis for the distinction between complement and modifier in the context of post-head complements or modifiers and even less so in the case of nominal complements or modifiers in pre-head position, i.e. in Noun-Noun sequences. More specifically, it will be contended that the distinction between complements and modifiers in Noun-Noun sequences cannot be held on cognitive grounds either. With this aim it will firstly be shown that there are different types of associations between the two nouns in Noun-Noun sequences, namely thematic-relation associations (e.g. food shopping) and peripheral associations (e.g. strip shopping). Secondly, evidence will be provided to show that, in spite of the fact that these various associations may correspond to our intuitions about the complement-modifier distinction, they manifest a similar degree of semantic bondedness and combination frequency. In order to measure the semantic bondedness and frequency of the different types of relations in Noun-Noun sequences a pilot study on a sample of Noun-Noun sequences will be conducted using corpus data. The relative frequency with which two nouns are combined correlates with different degrees of ‘semantic bonding’, which can be seen as a sign of cognitive relevance. As a result of this, it will be shown that, even in the case of relational nouns, the most frequent combinations are not always thematic-relation ones. In addition, some sequences where nouns are combined with other nouns denoting peripheral relations show a higher degree of semantic bonding than others in which they are combined with thematic-relation nouns. Finally, the distinction between complements and modifiers in Noun-Noun sequences will be addressed from the point of view of interpretation. In spite of the fact that thematic relation interpretations are assumed to have priority over property interpretations, this priority may be reversed by different factors.

DISFLUENCIES IN RUSSIAN SPOKEN MONOLOGUES: A DISTRIBUTIONAL ANALYSIS

2020 ◽  
Author(s):  
N. A. Korotaev ◽  
◽  
V. I. Podlesskaya ◽  
K. V. Smirnova ◽  
O. V. Fedorova ◽  
...  
Keyword(s):  
Speech Production ◽  
Relative Frequency ◽  
Structural Approach ◽  
Distributional Analysis ◽  
Fluent Speech ◽  
Filled Pauses ◽  
Distributional Patterns ◽  
Different Types ◽  
Corpus Data

The paper addresses the overall distribution of speech disfluencies in Russian spoken monologic discourse: basing on corpus data, we investigate qualitatively and quantitatively how disfluencies of different types group (or do not group) with each other and how isolated disfluencies and their sequences are sandwiched with periods of fluent speech in the course of speech production. Self-repairs, filled and silent pauses, and instances of hesitation lengthening were annotated in a subcorpus of the “Russian Pears Chats and Stories” (RUPEX). A distribution-oriented typology of disfluencies was proposed that distinguishes between isolated disfluencies, disfluency clusters, and quasiclusters. We claim that disfluency tokens tend to cluster, as isolated occurrences are significantly less frequent in our data than it could have been expected basing on the relative frequency of tokens. This finding contradicts previous studies that treated disfluency clusters as a more marginal phenomenon, and emphasizes the importance of a distributional, rather than merely structural, approach to annotating disfluencies. Furthermore, individual types of disfluency tokens demonstrate significantly different distributional patterns. Compared to other types, self-repairs occur more often in isolation, while words with hesitation lengthening appear predominantly in clusters, and filled pauses most often group with silent pauses to form quasi-clusters.

Decorative motifs on oil lamps from Grimm's 1973 excavations in Alexandria

2019 ◽  
Author(s):  
Heba Abdel Wahed Sayed
Keyword(s):  
Point Of View ◽  
Symbolic Meaning ◽  
Ancient History ◽  
Different Types ◽  
Decorative Motifs ◽  
Egyptian Culture ◽  
Late Roman

A collection of 30 clay oil lamps from Gunther Grimm's excavations in 1973 in the Western necropolis of Alexandria has been classified by Safaa Samir Abu Al Yazid from Tanta University and found to represent 12 different types ranging in time from the Hellenistic to the late Roman periods in Egypt's ancient history. The present paper looks at this collection from the point of view of the symbolic significance of the decorative motifs used in their decoration. These motifs— figural, floral and geometric—had obvious symbolic meaning to their users and signified more than a simple belief in certain deities. They also reflected Roman Egyptian culture.

scholarly journals Embodied Energy and Embodied GWP of Windows: A Critical Review

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3788
Author(s):  
Francesco Asdrubali ◽  
Marta Roncone ◽  
Gianluca Grazieschi
Keyword(s):  
Critical Analysis ◽  
Strong Dependence ◽  
Primary Energy ◽  
Point Of View ◽  
Embodied Energy ◽  
Construction Sector ◽  
Industrialized Countries ◽  
Different Types ◽  
Operational Phase ◽  
Operational Impact

The construction sector is one of the most energy-intensive in the industrialized countries. In order to limit climate change emissions throughout the entire life cycle of a building, in addition to reducing energy consumption in the operational phase, attention should also be paid to the embodied energy and CO2 emissions of the building itself. The purpose of this work is to review data on embodied energy and GWP derived from EPDs of different types of windows, to identify the LCA phases, the most impacting materials and processes from an environmental point of view and to perform a critical analysis of the outcomes. The results show a strong dependence on the typology of the frame, with wooden windows having competitive performances: lower average primary energy non-renewable (1123 MJ/FU), higher average primary energy renewable (respectively 817 MJ/FU) and lower global warming potential (54 kgCO2eq/FU). More transparency and standardization in the information conveyed by the program operators is, however, desirable for a better comparability of windows performances. In particular, the inclusion of the operational impact in the EPD is sporadic, but strongly important, since it can be the most impactful phase.

The combination of different open innovations: a longitudinal case study

2019 ◽  
Vol 13 (2) ◽  
pp. 342-362
Author(s):  
Xiaodong Yuan ◽  
Xiaotao Li
Keyword(s):  
New Product Development ◽  
Open Innovation ◽  
Point Of View ◽  
Longitudinal Case Study ◽  
Key Factors ◽  
Content Type ◽  
Strategic Direction ◽  
Different Types ◽  
Innovation Capacity

Purpose The purpose of this paper is to explore how an organization can combine different types of open innovations and what are the key factors that may influence the combination of different open innovations. Design/methodology/approach The basic methodology of this paper is the longitudinal inductive analysis within the conceptual framework of the open innovation proposed by Dahlander and Gann (2010). In this case study of Xiaomi Tech Inc., the open innovation combination is investigated through examining 25 new products created between August 2010 and December 2016 in terms of four general types: acquiring, sourcing, selling and revealing open innovation. Findings In practice, the combination of different types of open innovations can be realized. A firm may combine different open innovations at three levels: a single product level, a related product cluster level and a company level. In addition, different open innovations can be combined in diverse modes. The purpose of combining different types of open innovations is to overcome the disadvantages of each type and to exploit the advantages of all different types. Many factors may affect a firm’s option of how to combine open innovations. At different development stages, a firm may make and implement corresponding strategic direction based on its innovation capacity and internal resource. For a given strategy, the firm needs to create profits and manage intellectual property in the implementation of open innovations. These factors are interacted each other, rather than isolated. Originality/value The findings of this paper are helpful for better understanding how and why an organization can combine different types of open innovations. From a managerial point of view, an organization may combine different types of open innovations to leverage advantages and avoid disadvantages of each certain type of open innovation. An appropriate combination of different open innovations can effectively improve new product development.

scholarly journals Cell Bioprinting: The 3D-Bioplotter™ Case

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4005 ◽  
Author(s):  
Angelats Lobo ◽  
Ginestra
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Petri Dish ◽  
Two Dimensions ◽  
Point Of View ◽  
Lack Of Information ◽  
Synthetic Materials ◽  
Different Types ◽  
Available Information ◽  
User Friendly

The classic cell culture involves the use of support in two dimensions, such as a well plate or a Petri dish, that allows the culture of different types of cells. However, this technique does not mimic the natural microenvironment where the cells are exposed to. To solve that, three-dimensional bioprinting techniques were implemented, which involves the use of biopolymers and/or synthetic materials and cells. Because of a lack of information between data sources, the objective of this review paper is, to sum up, all the available information on the topic of bioprinting and to help researchers with the problematics with 3D bioprinters, such as the 3D-Bioplotter™. The 3D-Bioplotter™ has been used in the pre-clinical field since 2000 and could allow the printing of more than one material at the same time, and therefore to increase the complexity of the 3D structure manufactured. It is also very precise with maximum flexibility and a user-friendly and stable software that allows the optimization of the bioprinting process on the technological point of view. Different applications have resulted from the research on this field, mainly focused on regenerative medicine, but the lack of information and/or the possible misunderstandings between papers makes the reproducibility of the tests difficult. Nowadays, the 3D Bioprinting is evolving into another technology called 4D Bioprinting, which promises to be the next step in the bioprinting field and might promote great applications in the future.

XXVIII.—The Arrangement of Fibre Follicles in some Mammals, with special reference tothe Ovidæ

1939 ◽  
Vol 59 (3) ◽  
pp. 763-771 ◽  
Author(s):  
J. E. Duerden
Keyword(s):  
Special Reference ◽  
Point Of View ◽  
Research Association ◽  
General Development ◽  
Initial Form ◽  
Genetic Unit ◽  
Different Types

At the time of his death Dr Duerden was contemplating the preparation of a paper of this nature, and it is felt by Mrs Duerden that had he been able to express his wishes in this connection he would appreciate a record of the conclusions made by him. No one realised more than Dr Duerden himself the gaps which are still present in our knowledge and interpretation of the grouping of follicles and fibres in the mammalia, and this work is certainly not meant to be taken as representing Dr Duerden's final view or those of his colleagues at the Wool Industries Research Association. In view of the unique value of much of the material the present notes are intended, therefore, to form a basis and reference, firstly, for workers engaged in the general development of any mammalian coat from a morphogenic and phylogenetic point of view, and secondly, for those interested particularly in factors concerned in the formation of different types of fleeces in sheep. The conception of the follicle bundle as a discrete and basic genetic unit largely determining the initial form of the wool staple is of the highest importance in studies on the inheritance and developmentof fleece characters.

scholarly journals Phraseographie

2017 ◽  
Vol 19 (36) ◽  
pp. 91
Author(s):  
Erla Hallsteinsdóttir
Keyword(s):  
Language Learning ◽  
Language Learners ◽  
Corpus Linguistics ◽  
Point Of View ◽  
Methodological Basis ◽  
Multiword Expressions ◽  
Interesting Part ◽  
Corpus Data

Multiword expressions – i.e. phraseological units – like idioms and collocations are one of the most interesting part of every language. In this article, I investigate phraseological units from a lexicographical point of view. I discuss the theoretical and methodological basis of phraseography as a discipline that includes aspects of lexicography, phraseology, corpus linguistics and theories of language learning. I demonstrate the importance of corpora as a source for the lexicographer and the use of corpus data. I also discuss the requirements for the lexicographical treatment of phraseological units by the compilation of a phraseological database for language learners in relation to their assumed needs that have already been described in detail.

scholarly journals Verbs of falling and their argument structure in Circassian languages

2020 ◽  
Vol XVI (1) ◽  
pp. 723-756
Author(s):  
I. Bagirokova ◽  
◽  
D. Ryzhova ◽  
◽  
Keyword(s):  
Argument Structure ◽  
Cognitive Linguistics ◽  
Initial Point ◽  
Surface Expression ◽  
Special Importance ◽  
Vertical Orientation ◽  
Caucasian Family ◽  
Different Types ◽  
Corpus Data ◽  
Initial Source

This paper describes the semantics of falling in Adyghe and Kuban Kabardian from a typological perspective. The analysis is based on corpus data, accompanied by the results of elicitation. Although they represent the same Circassian branch of the Northwest Caucasian family, Adyghe and Kabardian still demonstrate some differences in the way their predicates of falling are lexicalized: while in Adyghe we have a distributive system which includes special lexical means for different types of falling (verbal root -fe- for falling from above, wəḳʷerejə- for losing vertical orientation, -zǝfor detachment, and verbs from adjacent semantic domains such as -we- ‘beat’ for destruction), there is only one dominant (-xwe-) and several peripheral predicates in the Kabardian language. What is peculiar about these languages, when compared to the available typological data, is that the parameter of orientation to the initial (Source) vs. final point (Goal) of movement is of special importance in lexicalizing cases of falling. In Circassian languages, simultaneous surface expression of Source and Goal of movement within a clause is prohibited for morphosyntactic reasons, and the lexemes denoting falling are divided into Source- vs. Goal-oriented ones. For some verbal roots, this orientation is an intrinsic semantic property (cf. -zǝ- which is always Source-oriented); in other cases, it is marked with specifi c affi xes (cf. a locative combination je-…-xǝ ‘down’ which marks re-orientation to the Source of falling of the initially Goal-oriented Adyghe verb -fe-). Thus, our analysis of the material may not only help to contribute to the general typology of falling but may throw light on such a phenomenon in cognitive linguistics as the emphasis on the fi nal point of movement in opposition to the initial point, also known as goal bias

scholarly journals A Comparative Analytical Study Of Shukra Dosha With Semen Analysis

2021 ◽  
Vol 9 (02) ◽  
Author(s):  
Shivanand F Kawane
Keyword(s):  
Comparative Research ◽  
Analytical Study ◽  
Research Study ◽  
Semen Analysis ◽  
Medical Science ◽  
Modern Science ◽  
Point Of View ◽  
Laboratory Examination ◽  
Different Types ◽  
Clinical Conditions

As we know Shukra dhatu is a most essential end product of the rest of all 6 dhatus of sharira. So, an analytical comparative research study has been made on infertility(bandhatva) patients. In this study, we explain tenets of shukra dhatu and different types of shukra doshas according to Acharya Charaka and Sushruta. According to doshas 8 types of Shukra doshas explaind by acharya and 9 types of semen abnormality by modern science. An attempt has been made to correlate these shukra doshas with an abnormality of semen according to modern medical science, on the basis of clinical features, physical appearance, and laboratory examination of semen. For the study 20 patient suffering from any kind of infertility has been selected from O.P.D. of Shalya Tantra department of Arogyashala rugnalaya, Nashik. On observation, the result showed out of 20 patients , 10 patients suffering from vatapittaj, 6 from shukra kshaya, 2 from vataj and 2 from pittaj shukra dosha according to ayurvedic point of view. Simultaneously we correlate it with different clinical conditions of semen and we found Out of 20 patients, 8 suffering from Oligoasthenospermia, 6 from Oligospermia, 2 from Asthenozoospermia, 2 from Tetratazospermia, 2 from Infective semen.  

scholarly journals Commercial Banks Versus BPR: Advantages Based On Perception, Hope And Customer Interest

2017 ◽  
Vol 1 (2) ◽  
pp. 102-112
Author(s):  
Hesti Budiwati
Keyword(s):  
Competitive Advantage ◽  
Six Sigma ◽  
Commercial Banks ◽  
Public Trust ◽  
Lean Six Sigma ◽  
Point Of View ◽  
Competitive Advantages ◽  
Public Funds ◽  
Different Types ◽  
Six Sigma Approach

Commercial banks and Bank Perkreditan Rakyat are two different types of banks whose existence in society aims to raise and channel public funds to improve people's lives. The facts show that there is a sharp competition between the two types of banks in terms of gaining public trust to become bank customer but although these two types of banks are different but still able to develop well in society. This study aims to identify the factors that become competitive advantage at Commercial Banks and Bank Perkreditan Rakyat from the customer's point of view based on customers' perceptions, expectations and interests so banks can determine competitive strategy. The approach used in this research is Lean Six Sigma approach with a sample of 60 respondents consisting of 30 customers of Commercial Banks and 30 customers of Bank Perkreditan Rakyat. Respondents will be asked to respond to research instruments based on their perceptions, expectations and interests. The results of the study there are five competitive advantages in Commercial Banks (1) promotions made, (2) reward appeal, (3) saving security, (4) cleanliness and comfort of the room, (5) friendliness, courtesy and neatness. Bank Perkreditan Rakyat obtained competitive advantage that is (1) cleanliness and comfort of the room,(2) ability and alertness of the officers, (3) friendliness, courtesy and neatness, (4) saving security, (5) familiarity  of the officer with the customer. In addition there are similarities there are interesting differences that is on the excellence of promotional activities and the attractiveness of prizes at Commercial Banks. and the familiarity of officers with customers at Bank Perkreditan Rakyat.

Sign in / Sign up

Export Citation Format

Share Document