Synthesis of cationic flocculants based on acrylamide and [2-(acryloyloxy)ethyl]trimethylammonium chloride co polymers by semicontinuous inverse microemulsion co polymerization. Part I: Criteria for selection of comonomer formulation

e-Polymers ◽  
2006 ◽  
Vol 6 (1) ◽  
Author(s):  
José R. Ochoa G. ◽  
Francisca Río ◽  
Pedro M. Sasia ◽  
Issa A. Katime ◽  
Francisco Javier Escudero ◽  
...  

AbstractThe influence of surfactant blend composition, organic solvent (oil) structure and cationic charge density (CCD) on stability of comonomer inverse microemulsions of acrylamide and [2-(acryloyloxy)ethyl]trimethylammonium chloride has been studied in order to obtain criteria for selecting comonomer inverse microemulsions before copolymerization resulting in copolymer inverse microemulsion useful as flocculants. Results show that optimum HLB can be explained by cohesive energy ratio theory and it increases with CCD; the higher the hydrophobic chain length of surfactants in surfactant blend, the lower the minimum surfactant blend concentrations (SBCm) needed to obtain stable inverse microemulsions; and linear organic solvents allow a decrease of the SBCm required for stabilizing comonomer inverse microemulsions.

2022 ◽  
Author(s):  
Mingmei Wu ◽  
Bojana Milićević ◽  
Yingyuan Chen ◽  
Junhao Li ◽  
Miroslav D Dramićanin ◽  
...  

We report an organic solvent-assisted (OSA) co-precipitation strategy for the production of Mn4+-activated K2TiF6 phosphor. The phosphor particle size was controlled through the selection of organic solvents with an alcohol...


PeerJ ◽  
2017 ◽  
Vol 5 ◽  
pp. e3341 ◽  
Author(s):  
Jonathan Maiangwa ◽  
Mohd Shukuri Mohamad Ali ◽  
Abu Bakar Salleh ◽  
Raja Noor Zaliha Raja Abd Rahman ◽  
Yahaya M. Normi ◽  
...  

The dynamics and conformational landscape of proteins in organic solvents are events of potential interest in nonaqueous process catalysis. Conformational changes, folding transitions, and stability often correspond to structural rearrangements that alter contacts between solvent molecules and amino acid residues. However, in nonaqueous enzymology, organic solvents limit stability and further application of proteins. In the present study, molecular dynamics (MD) of a thermostable Geobacillus zalihae T1 lipase was performed in different chain length polar organic solvents (methanol, ethanol, propanol, butanol, and pentanol) and water mixture systems to a concentration of 50%. On the basis of the MD results, the structural deviations of the backbone atoms elucidated the dynamic effects of water/organic solvent mixtures on the equilibrium state of the protein simulations in decreasing solvent polarity. The results show that the solvent mixture gives rise to deviations in enzyme structure from the native one simulated in water. The drop in the flexibility in H2O, MtOH, EtOH and PrOH simulation mixtures shows that greater motions of residues were influenced in BtOH and PtOH simulation mixtures. Comparing the root mean square fluctuations value with the accessible solvent area (SASA) for every residue showed an almost correspondingly high SASA value of residues to high flexibility and low SASA value to low flexibility. The study further revealed that the organic solvents influenced the formation of more hydrogen bonds in MtOH, EtOH and PrOH and thus, it is assumed that increased intraprotein hydrogen bonding is ultimately correlated to the stability of the protein. However, the solvent accessibility analysis showed that in all solvent systems, hydrophobic residues were exposed and polar residues tended to be buried away from the solvent. Distance variation of the tetrahedral intermediate packing of the active pocket was not conserved in organic solvent systems, which could lead to weaknesses in the catalytic H-bond network and most likely a drop in catalytic activity. The conformational variation of the lid domain caused by the solvent molecules influenced its gradual opening. Formation of additional hydrogen bonds and hydrophobic interactions indicates that the contribution of the cooperative network of interactions could retain the stability of the protein in some solvent systems. Time-correlated atomic motions were used to characterize the correlations between the motions of the atoms from atomic coordinates. The resulting cross-correlation map revealed that the organic solvent mixtures performed functional, concerted, correlated motions in regions of residues of the lid domain to other residues. These observations suggest that varying lengths of polar organic solvents play a significant role in introducing dynamic conformational diversity in proteins in a decreasing order of polarity.


Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 722
Author(s):  
Shuji Yomo

In this study, a 2-pack isocyanate curing waterborne paint (without organic solvents) encapsulating dibutyltin dilaurate (hereinafter, DBTL) in nonionic surfactant micelles with an hydrophilic–lipophilic balance of 13–14 in advance releases DBTL when the micelles are collapsed at 80 °C or higher, whereby the curing progresses rapidly. On the other hand, the viscosity levels of the paint before and after being left at 40 °C for 1 h are almost the same. Organic solvents are mandatory for waterborne paints to provide paint and film properties, but they might collapse the micelles when they are formulated in the paint. In this study, we investigate whether the abovementioned paint containing organic solvents can develop switching functionality in terms of maintaining the storage stability at 40 °C and expressing a catalytic function at 80 °C to progress the curing. As a result, we find that if the solubility of the organic solvent in water at 20 °C is at least 10 g/100 mL and the boiling point is ≤200 °C, both curing and storage stability can be achieved.


2017 ◽  
Vol 156 ◽  
pp. 79-86 ◽  
Author(s):  
Gro Smistad ◽  
Bo Nyström ◽  
Kaizheng Zhu ◽  
Marthe Karoline Grønvold ◽  
Anne Røv-Johnsen ◽  
...  

Radiocarbon ◽  
2017 ◽  
Vol 60 (1) ◽  
pp. 35-50 ◽  
Author(s):  
Fiona Brock ◽  
Michael Dee ◽  
Andrew Hughes ◽  
Christophe Snoeck ◽  
Richard Staff ◽  
...  

AbstractTo achieve a reliable radiocarbon (14C) date for an object, any contamination that may be of a different age must be removed prior to dating. Samples that have been conserved with treatments such as adhesives, varnishes or consolidants can pose a particular challenge to 14C dating. At the Oxford Radiocarbon Accelerator Unit (ORAU), common examples of such substances encountered include shellac, the acrylic polymers Paraloid B-67 and B-72, and vinyl acetate-derived polymers (e.g. PVA). Here, a non-carbon-containing absorbent substrate called Chromosorb® was deliberately contaminated with a range of varieties or brands of these conservation treatments, as well as two cellulose nitrate lacquers. A selection of chemical pretreatments was tested for their efficiency at removing them. While the varieties of shellac and Paraloid tested were completely removed with some treatments (water/methanol and acetone/methanol/chloroform sequential washes, respectively), no method was found that was capable of completely removing any of the vinyl acetate-derived materials or the cellulose nitrate lacquers. While Chromosorb is not an exact analog of archaeological wood or bone, for example, this study suggests that it may be possible to remove aged shellac and Paraloid from archaeological specimens with standard organic solvent-acid-base-acid pretreatments, but it may be significantly more difficult to remove vinyl acetate-derived polymers and cellulose nitrate lacquers sufficiently to provide reliable 14C dates. The four categories of conservation treatment studied demonstrate characteristic FTIR spectra, while highlighting subtle chemical and molecular differences between different varieties of shellac, Paraloid and cellulose nitrate lacquers, and significant differences between the vinyl acetate derivatives.


1976 ◽  
Vol 56 (4) ◽  
pp. 805-809 ◽  
Author(s):  
V. M. BENDELOW

A procedure that provides information on the suitability of barley for malting and, brewing purposes is described. Three parameters are measured: mash filtration rate, wort viscosity and wort-reducing sugar content, as maltose. Maltose is determined by an auto-analyzer method and this is a satisfactory alternative to the specific gravity procedure for the estimation of percent extract. The addition of these criteria to those already in use enables more discriminatory selection at early generations of barley-breeding programs. The technique requires only one sample extraction and 18 g of laboratory malt.


Author(s):  
L.L. Zakharova ◽  
◽  
G.A. Zhorov ◽  
V.I. Dorozhkin ◽  
◽  
...  

Negative impact on the environment as a result of economic activity of man increasingly becomes the character of combined pollution of ecotoxicants, including xenobiotics of radiation and chemical nature. In animal husbandry in ecologically unfavorable regions, sorbtion-detoxication technologies based on the complex application of bioprotective substances of different origin are used to reduce the intake and accumulation of xenobiotics, to normalize the physiological state of animals and to obtain safe products. It is necessary to observe certain principles ensuring compatibility of components, a wide range of bioprotective action, efficiency and safety at their use in developing the compositions of such sorption-detoxifying complexes. The article substantiates the criteria that should be followed in creating sorption-detoxifying complexes and presents groups of drugs with different mechanisms of action (sorbents, antioxidants, immunomodulators, adaptogens and other biologically active substances) for inclusion in the formulations of combined compositions.


Sign in / Sign up

Export Citation Format

Share Document