Reactive maleic anhydride polyolefins (MAPOs) in oriented strand board. Part 2: Influence on physical and mechanical properties

Holzforschung ◽  
2011 ◽  
Vol 65 (1) ◽  
pp. 89-96 ◽  
Author(s):  
Sudip Chowdhury ◽  
Vikram Yadama
Keyword(s):  
Mechanical Properties ◽  
Maleic Anhydride ◽  
Oriented Strand Board ◽  
Phenol Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Moisture Resistance ◽  
Thickness Swelling ◽  
Water Vapor Transmission ◽  
Reduced Water

Abstract The use of reactive polyolefin and phenol formaldehyde (PF) resin blends to improve the moisture durability of oriented strand composite (OSC) panels was investigated. Test panels were hot pressed with adhesive blends consisting of varying proportions of PF and maleic anhydride polypropylene (MAPP) anionic emulsion, and their physical and mechanical properties were evaluated. The addition of MAPP did not significantly affect the modulus of elasticity (MOE) of the panels, but reduced the modulus of rupture in bending (MOR) for 12% moisture content (MC) and 24-h soak specimens. An increase in PF content significantly improved the MOE and MOR of specimens subjected to the environment. Adding MAPP reduced internal bond strength, particularly at higher PF levels. The addition of MAPP and raising PF levels significantly reduced water absorption and thickness swelling of the panels. At higher MAPP levels, the water vapor transmission in OSC as well as the permeance of the material, was reduced. Composite board equilibrated to lower MC with increasing MAPP content in the resin blend. The results indicate that increasing the PF content is the most effective method of improving both moisture resistance and the mechanical properties of OSC; addition of MAPP improves the moisture resistance of the panels, but significantly reduces their mechanical properties.

scholarly journals INFLUENCE OF THERMAL MODIFICATION ON THE PHYSICAL AND MECHANICAL PROPERTIES OF Eucalyptus badjensis MIXED PARTICLEBOARD / OSB PANELS

FLORESTA ◽  
2021 ◽  
Vol 51 (2) ◽  
pp. 419
Author(s):  
Giuliano Ferreira Pereira ◽  
Setsuo Iwakiri ◽  
Rosilani Trianoski ◽  
Polliana D'angelo Rios ◽  
Renan Zunta Raia
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Phenol Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Dry Mass ◽  
Thermal Modification ◽  
Modulus Of Rupture ◽  
Thickness Swelling ◽  
Swelling Properties ◽  
Different Temperatures

The objective of this research was to evaluate the effects of thermal modifications, at different temperatures and exposure times, on the technological properties of mixed particleboard / OSB panels made out of Eucalyptus badjensis. Using the wood of Eucalyptus badjensis, Particleboard, OSB and mixed Particleboard/OSB panels (control and thermally modified) were manufactured. The mixed panels’ thermal modification was carried out under three temperatures (180ºC, 200ºC and 220ºC) and two exposure times (10 minutes and 12 minutes). For the panels’ manufacturing, 6% of phenol-formaldehyde adhesive and 1% of paraffin were employed, which was calculated based on the particles’ dry mass. The water absorption and thickness swelling properties were evaluated after 2 and 24 hours of immersion, in addition to the panels’ modulus of elasticity, modulus of rupture and internal bond. Based on the results, we were able to conclude that the thermal modification affected most of the physical properties positively. From the different exposure times studied, the most effective one was the period of 12 minutes, especially for water absorption after 2 hours, which caused a reduction of 11.27%. In turn, the most effective temperature was of 220ºC, highlighting the thickness swelling after 24 hours, which caused a swelling decrease of 23.76% in comparison with the control panels. Regarding the mechanical properties, the thermal modification, in terms of the studied exposure times and temperatures, did not affect the results of the mixed particleboard /OSB panels. 

scholarly journals Effects of Strands Pre-treatment and Adhesive Type on the Properties of Oriented Strand Board Made from Gmelina (Gmelina arborea) Wood

2021 ◽  
Vol 9 (3) ◽  
pp. 475-487
Author(s):  
Siti Aisyah ◽  
Januar Haryadi ◽  
Muhammad Iqbal Maulana ◽  
Marwanto ◽  
Denni Prasetia ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Oriented Strand Board ◽  
Phenol Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Steam Treatment ◽  
Gmelina Arborea ◽  
Holding Power ◽  
Methylene Diphenyl Diisocyanate ◽  
Pre Treatment

The objective of this study was to evaluate the effects of steam treatment of strands on the physical and mechanical properties of oriented strand board (OSB) from gmelina wood (Gmelina arborea) bonded with two types of adhesive. Strands of gmelina wood were steamed at 126°C and pressure of 0.14 MPa for 1 h. OSBs were prepared with a 0.6 g/cm3 target density using two types of adhesives, namely methylene diphenyl diisocyanate (MDI) and phenol-formaldehyde (PF) resins. The resin content used was 5% for MDI and 10% for PF. The physical and mechanical properties of the OSB were evaluated referring to the JIS A 5908-2003 standard, and the values were compared with CSA 0437.0 (Grade O-1) standard. The results showed that the steam treatment improved the dimensional stability of OSB, as shown from the decrease of water absorption and thickness swelling. Steam treatment also increased the mechanical properties of the OSB, such as modulus of elasticity, modulus of rupture, internal bonding strength, and screw holding power. The results revealed that gmelina wood OSB bonded with MDI adhesives produced better OSB than bonded with PF resin. Keywords: gmelina, methylene diphenyl diisocyanate, oriented strand board, phenol-formaldehyde, steam treatment  

scholarly journals Sifat Fisis dan Mekanis Oriented Strand Board Hibrida Bambu Pada Berbagai Shelling Ratio (Physical and Mechanical Properties of Hybrid Bamboo Oriented Strand Board at Various Shelling Ratios)

2021 ◽  
Vol 17 (2) ◽  
pp. 152-159
Author(s):  
Rynaldo Davinsy ◽  
Sena Maulana ◽  
Muhammad I Maulana ◽  
Elvara D Satria ◽  
Deded S Nawawi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Outer Layer ◽  
Oriented Strand Board ◽  
Phenol Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Outer Core ◽  
Phenol Formaldehyde Resin ◽  
Modulus Of Rupture ◽  
Formaldehyde Resin ◽  
Board Density

Hybrid Bamboo Oriented Strand Boards (OSB) were produced to improve bamboo OSB's physical and mechanical properties. Shelling ratio adjustment of the strand type combination could determine the optimal physical and mechanical properties of hybrid bamboo oriented strand boards (OSB). The purpose of this study was to evaluate the physical and mechanical properties of hybrid betung and andong bamboos OSB at various shelling ratios. Steam modified strands of betung and andong bamboo were used as an outer layer and core layer, respectively. Hybrid bamboo OSBs were prepared with 0.7 g cm-3 target density and 8% phenol-formaldehyde resin content. Three layers of OSB were made with outer: core shelling ratios of 30:70, 40:60, 50:50, and 60:40. The physical and mechanical properties of the OSB were tested referring to the JIS A 5908-2003 standard. The targeted board density was achieved and the physical properties of all hybrid bamboo OSB have met the requirement of CSA O437.0 (Grade O-1) standard criteria. The parallel modulus of elasticity (MOE) and modulus of rupture (MOR) increased with increasing outer layer ratio. However, the perpendicular MOE and MOR decreased with increasing outer layer ratio. The internal bonding (IB) of the OSB with a shelling ratio of 30:70 and 40:60 met with the requirement of the CSA O437.0 (Grade O-1) standard.

Selected Physical and Mechanical Properties of 2-Ply Bamboo Laminated Lumber with Modified Phenol Formaldehyde

2015 ◽  
Vol 1088 ◽  
pp. 583-586
Author(s):  
Zhi Wei Huang ◽  
Ming Jie Guan
Keyword(s):  
Mechanical Properties ◽  
Surface Density ◽  
Phenol Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Thickness Swelling ◽  
Environmental Friendly ◽  
Density Surface ◽  
Bonding Surface ◽  
Better Than

In this paper, environmental friendly phenol formaldehyde modified with larch thanaka and urea was used to make 2-ply bamboo laminated lumber. Effects of two assemble patterns (inner to inner and outer to outer) on physical and mechanical properties of 2-ply bamboo laminated lumber from carbonized and bleached bamboo strips were investigated. The results showed that modulus of elasticity (MOE) and modulus of rupture (MOR) of carbonized bamboo laminated lumber were better than that of bleached bamboo laminate lumber. It illustrated that physical and mechanical properties of carbonized bamboo laminated lumber became better. The MOE and MOR of bamboo laminated lumber, bonding with inner (low density surface) to inner surface, were better than that of outer (high density surface) to outer surface. It meant that MOE and MOR of bamboo laminated lumber were increased by the bonding surface density decreased of bamboo unit. Thickness swelling of carbonized bamboo laminated lumber was lower than that of bleached bamboo, which meant its dimensional stability was better than that of bleached bamboo laminated lumber.

scholarly journals KUALITAS PAPAN KOMPOSIT LIMBAH KULIT BATANG SAGU (Metroxylon sp) DAN PLASTIK POLIPROPILENA BERDASARKAN JUMLAH LAPISAN PENYUSUN

2018 ◽  
Vol 7 (1) ◽  
Author(s):  
Mayang Archila ◽  
Farah Diba ◽  
Dina Setyawati ◽  
. Nurhaida
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Internal Bonding ◽  
Thickness Swelling ◽  
Composite Board ◽  
Average Value ◽  
Composite Layers ◽  
Sago Bark

The objective of this research is to evaluate the effect of the number of composite layers on the quality of the composite board from sago bark waste and plastic waste, and the number of composite layers that produce the best quality on composite board. The composite board is made with size 30 cm x 30 cm x 1 cm. The composition and division of the material was carried out manually with the polypropylene distribution divided into three parts: the front and rear respectively of 15%, and the center 70% of the plastic weight. Target density of composite boards was 0.7 g / cm3. The treatment used is based on the number of layers composing, which is 5 layers, 7 layers, 9 layers, 11 layers and 13 layers. After mixed the sago bark particle and waste of polypropylene, the materials then compressed with hot press at 180oC with pressure about ± 25 kg / cm2 for 10 minutes. The composite boards then tested the quality included physical and mechanical properties. Testing of physical and mechanical properties refers to JIS A 5908-2003 standard. Physical properties consist of density, moisture content, thickness swelling, and water absorption. Mechanical properties consist of modulus of rupture, modulus of elasticity, internal bonding, and modulus of screw holding strength. The study used a completely randomized design experiment consisting of 5 treatments and 3 replications. The results showed the average value of composite density was range between 0.6962 – 0.7896 g/cm3, the moisture content was range between 4.3388 % - 6.8066%, the thickness swelling was range between 8.2605% - 11.9615%, and water absorption was range between 17.2380% - 22.3867%. The average value of modulus of rupture was range between 60,0632 kg/cm2 – 64,4068 kg/cm2, the modulus of elasticity was range between 17935,1813g/cm2 – 32841,8278 kg/cm2, the internal bonding was range between 1,9268 kg/cm2  - 5,4119 kg/cm2, and the modulus of screw holding strength was range between 78,2530 kg/cm2 – 92,9677 kg/cm2. The composite board made from sago stem bark waste and polypropylene waste plastic with 13 layers treatment is the best composite board and fulfilled the JIS A 5908-2003 standard. Keywords: bark of sago, composite boards, layer of composite, polypropylenes plastic, waste

scholarly journals Effects of thermo-hydro-mechanical treatments on various physical and mechanical properties of poplar (Populus) wood

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 9596-9610
Author(s):  
Yali Shao ◽  
Lili Li ◽  
Zhangjing Chen ◽  
Sunguo Wang ◽  
Ximing Wang
Keyword(s):  
Mechanical Properties ◽  
Thermal Treatment ◽  
Modulus Of Elasticity ◽  
Mechanical Treatment ◽  
Elasticity Modulus ◽  
Physical And Mechanical Properties ◽  
Modulus Of Rupture ◽  
Compression Rate ◽  
Thickness Swelling ◽  
Maximum Thickness

Poplar (Populus) wood was subjected in this work to thermo-hydro-mechanical treatment. The influence of the treatment parameters on the physical and mechanical properties were investigated. The wood samples were densified under three compression ratios (0%, 30%, and 50%), and thermally treated at three temperatures (180 °C, 200 °C, and 220 °C), at three thermal treatment durations (3 h, 4 h, and 5 h). The density, modulus of elasticity, modulus of rupture, radial hardness, and thickness swelling were measured. The results showed that the densities of the samples increased by 36.6% to 49.7%. As the compression rate increased, the temperature, duration, modulus of elasticity, modulus of rupture, and hardness increased. However, the dimensions of the densified samples were less stable. Compared to the densified samples, the maximum thickness swelling could be reduced by 74% (from 29.7% to 7.8%) when subjected to a thermal treatment at 220 °C for 3 h.

scholarly journals Effects of Resin Content on the Characteristics of Bamboo Oriented Strand Board Prepared from Strands of Betung, Ampel, and Their Mixtures

2021 ◽  
Vol 9 (3) ◽  
pp. 454-465
Author(s):  
Tengku Muhammad Renzy Hariz ◽  
Indra Agus Santosa ◽  
Muhammad Iqbal Maulana ◽  
Marwanto ◽  
Denni Prasetia ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Dimensional Stability ◽  
Oriented Strand Board ◽  
Physical And Mechanical Properties ◽  
Resin Content ◽  
Thickness Swelling ◽  
Higher Dimensional ◽  
Bambusa Vulgaris ◽  
Dendrocalamus Asper

The objectives of this research were to evaluate bamboo-oriented strand board (BOSB) characteristics made from betung (Dendrocalamus asper), ampel (Bambusa vulgaris), and their mixtures at two different contents (3% and 5%) of methylene diphenyl di-isocyanate (MDI) adhesives. The strands were steam-treated at 126°C for 1 h under the pressure of 0.14 MPa. Three-layered BOSBs with a target density of 0.7 g/cm3 were made with the size of 30 cm x 30 cm x 0.9 cm and a shelling ratio of 1:2:1 (face:core:back layers). The physical and mechanical properties of BOSB were evaluated following JIS A 5908 (2003) standard, and the results were compared with the CSA 0437.0 Grade O-1 standard. The results show that BOSB from the mixtures of betung and ampel bamboo strands has higher dimensional stability as shown by the decrease in water absorption and thickness swelling and higher mechanical properties than single BOSB. All BOSBs with 5% resin content have higher dimensional stability, MOE, and MOR than BOSB with 3% resin content. The physical and mechanical properties of all BOSB manufactured met the CSA 0437.0 Grade O-1 standard. This study proved that BOSBs from the mixture of betung and ampel strands have the potential to be developed due to having better physical and mechanical qualities than a single BOSB. Keywords: ampel (Bambusa vulgaris), bamboo oriented strand board, betung (Dendrocalamus asper), resin content, strand mixtures

scholarly journals Properties of dual-species bamboo-oriented strand boards bonded with phenol formaldehyde adhesive under various compression ratios

BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 5422-5435
Author(s):  
Sena Maulana ◽  
Wahyu Hidayat ◽  
Ihak Sumardi ◽  
Nyoman J. Wistara ◽  
Muhammad I. Maulana ◽  
...  
Keyword(s):  
Compression Ratio ◽  
Phenol Formaldehyde ◽  
Slenderness Ratio ◽  
Physical And Mechanical Properties ◽  
Phenol Formaldehyde Resin ◽  
Modulus Of Rupture ◽  
Formaldehyde Resin ◽  
Thickness Swelling ◽  
Naoh Solution ◽  
Dendrocalamus Asper

Physical and mechanical properties were evaluated for bamboo-oriented strand boards (BOSB) prepared with combinations of two contrasting bamboo species and bonded with phenol formaldehyde resin under various compression ratios. The strands from the culms of Gigantochloa pseudoarundinacea and Dendrocalamus asper bamboo were steam-treated at a temperature of 126 °C and a pressure of 0.14 MPa for 1 h and then washed with a 1% NaOH solution. Three-layer dual-species bamboo-oriented strand boards with a shelling ratio of 25 to 50 to 25 (face to core to back) were manufactured with different compression ratios using an 8% phenol formaldehyde adhesive and 1% paraffin. The slenderness ratio and aspect ratio were evaluated by measuring 100 random strands to determine uniformity. The solidity profiles of the dual-species bamboo-oriented strand boards (thickness direction) were relatively uniform. The modulus of rupture, modulus of elasticity, and internal bond values of the dual-species bamboo-oriented strand boards increased as the compression ratio increased, but the water absorption and thickness swelling decreased. The dual-species bamboo-oriented strand boards prepared with compression ratios of 1.44 to 1.25 and 1.54 to 1.33 met all the requirements of CSA standard 0437 (2011). The optimum compression ratio for the preparation of dual-species bamboo-oriented strand boards was 1.44 to 1.25.

scholarly journals Physical and Mechanical Properties Evaluation of Corncob and Sawdust Cement Bonded Ceiling Boards

2019 ◽  
Vol 42 ◽  
pp. 65-75 ◽  
Author(s):  
Atoyebi Olumoyewa Dotun ◽  
Odeyemi Samson Olalekan ◽  
Azeez Lateef Olugbenga ◽  
Modupe Abayomi Emmanuel
Keyword(s):  
Mechanical Properties ◽  
Modulus Of Elasticity ◽  
Cement Content ◽  
Physical And Mechanical Properties ◽  
American National Standard Institute ◽  
Mechanical Tests ◽  
Industrial Wastes ◽  
Modulus Of Rupture ◽  
National Standard ◽  
Thickness Swelling

This study considered the production of composite ceiling boards from both agricultural and industrial wastes. Boards with different blending proportions by weight of cement, corncob and sawdust (Cem:Ccb:Swd) were produced and tested. Physical and mechanical tests such as Water Absorption (WA), Thickness Swelling (TS), Modulus of Elasticity (MOE) and Modulus of Rupture (MOR) were carried out on the products. The findings revealed that the board with Cem:Ccb:Swd blending proportion 50:10:40 gave the highest values of MOE and MOR and also had the lowest values of WA and TS. The MOE and MOR values of 3.432 are both higher than the minimum values of 550 N/mm2 and 3 N/mm2 specified for MOE and MOR respectively by the American National Standard Institute, for general-use particle boards. The cement content is inversely proportional to the physical properties and directly proportional to the mechanical properties.

Sign in / Sign up

Export Citation Format

Share Document