Effect of Surfactant on the Preparation of Nano-powder for Yb Doping Laser Transparent YAG Ceramic

2013 ◽  
Vol 32 (5) ◽  
pp. 511-515 ◽  
Author(s):  
Xiao Guo Cao ◽  
Jia Wang ◽  
Qi Bai Wu ◽  
Hai Yan Zhang
Keyword(s):  
Particle Size ◽  
Polyethylene Glycol ◽  
Average Particle Size ◽  
Ammonium Bicarbonate ◽  
Spherical Particles ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Nano Powder ◽  
Co Precipitation

AbstractYb:YAG transparent ceramic nano-powder was prepared by chemical co-precipitation method, with ammonium bicarbonate as the precipitant and polyethylene glycol as surfactant. The addition of polyethylene glycol can reduce the agglomeration and particle size of the prepared Yb:YAG powder. The morphology, thermal stability and phase structure of Yb:YAG nano-powder were charactered by scanning electron microscopy (SEM), thermogravimetry and differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy. The results show that well-crystallized nano-powder was obtained by calcining the precursors at 900 °C for 3 h. The average particle size of Yb:YAG powder is about 100–200 nm. When the volume amount of polyethylene glycol is 2.0%, well-dispersed Yb:YAG powder with spherical particles of 100 nm diameter was obtained.

Chemical Synthesis and Characterization of Bismuth Vanadate Powder

2010 ◽  
Vol 93-94 ◽  
pp. 153-156 ◽  
Author(s):  
Pusit Pookmanee ◽  
Sumintra Paosorn ◽  
Sukon Phanichphant
Keyword(s):  
Particle Size ◽  
Single Phase ◽  
Average Particle Size ◽  
Ammonium Hydroxide ◽  
Bismuth Vanadate ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Co Precipitation

Bismuth vanadate powder was synthesized by a chemical co-precipitation method. Bismuth nitrate and ammonium vanadate were used as the starting precursors. The yellow precipitated powder was formed after adding ammonium hydroxide until the pH of final solution was 7. The powder was filtered and dried at 60 °C for 24h and calcined at 200-400 °C for 2h. The phase of bismuth vanadate powder was studied by X-ray diffraction (XRD). A single phase of monoclinic structure was obtained after calcinations at 200-400 °C for 2h. The morphology and particle size of bismuth vanadate powder were investigated by scanning electron microscopy (SEM). The particle was irregular in shape and highly agglomerated with an average particle size of 0.5 µm in width and 1.5 µm in length.

Morphology-Controlled CaCO3 Nanostructures by Modified Co-Precipitation in Pulsed Mode

2015 ◽  
Vol 752-753 ◽  
pp. 148-153
Author(s):  
M.M. Nassar ◽  
Taha Ebrahiem Farrag ◽  
M.S. Mahmoud ◽  
Sayed Abdelmonem
Keyword(s):  
Particle Size ◽  
Calcium Carbonate ◽  
Rotation Speed ◽  
Average Particle Size ◽  
Calcium Nitrate ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray ◽  
Co Precipitation ◽  
Pulsed Mixing

Calcium carbonate nanoparticles and nanorods were synthesized by precipitation from saturated sodium carbonate and calcium nitrate aqueous solutions through co precipitation method. A new rout of synthesis was done by both using pulsed mixing method and controlling the addition of calcium nitrate. The effect of the agitation speed, and the temperature on particle size and morphology were investigated. Particles were characterized using X-ray Microanalysis, X-ray analysis (XRD) and scanning electron microscopy (SEM). The results indicated that increasing the mixer rotation speed from 3425 to 15900 (rpm) decreases the average particle size to 64±7 nm. A rapid nucleation then aggregation induced by excessive shear force phenomena could explain this observation. Moreover, by increasing the reaction temperature, the products were converted from nanoparticle to nanorods. The maximum attainable aspect ratio was 6.23 at temperature of 75°C and rotation speed of 3425. Generally, temperature raise promoted a significant homoepitaxial growth in one direction toward the formation of calcite nanorods. Overall, this study can open new avenues to control the morphology of the calcium carbonate nanostructures.

scholarly journals Study Microstructure of Fe3O4 Modification Using PEG 4000 form Iron Sand at Wari Ino Beach As A Biosensor Application

2021 ◽  
Vol 8 (3) ◽  
pp. 168-171
Author(s):  
Kurnia Kurnia ◽  
Meidy Kaseside ◽  
Steven Iwamony
Keyword(s):  
Average Particle Size ◽  
Precipitation Method ◽  
High Dispersion ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Peg 4000 ◽  
Biosensor Application ◽  
Scherrer Formula ◽  
Co Precipitation

Fe3O4 encapsulated PEG form iron sand at wari ino beach has been successfully synthesized by co-precipitation method. The average particle size  of the nanoparticle 11,3 nm was determined by scherrer formula. Fe3O4 modification PEG 4000 was successfully encapsulated the samples  by the presence C-O-C and CH bonding that were characterized using Fourier Transform Infra Red (FTIR), X-Ray Diffraction (XRD) pattern  shows that all samples  are formed by single  phase cubic spinel magnetite  , and Scanning Electron Microscopy (SEM) shows the  high dispersion capability while encapsulated process using  PEG. The results of the characterization show that the Fe3O4 successfully encapsulated by PEG 4000.

scholarly journals Synthesis and characterization of ZnTe nanoparticles

2016 ◽  
Vol 17 (1) ◽  
pp. 1-3 ◽  
Author(s):  
Sujan Dhungana ◽  
Bhoj Raj Paudel ◽  
Surendra K. Gautam
Keyword(s):  
Particle Size ◽  
Field Effect Transistors ◽  
Average Particle Size ◽  
Precursor Solution ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Zinc Compounds ◽  
Transmission Electron

In this work, we report the ZnTe semiconductor nanoparticles (NPs) prepared by aqueous chemical precipitation method using the tellurium precursor solution with different zinc compounds. Three batches of ZnTe NPs were synthesized to study the effect of dilution on the size and phase purity of ZnTe. The influence of source compounds and concentrations of the size and structure of NPs were studied. ZnTe NPs have great applications as field-effect transistors and photodetectors. The existing controversy regarding the crystalline structure of ZnTe NPs, whether it is cubic or hexagonal, has been resolved using X-ray Diffraction (XRD) data. The ZnTe NPs possess cubic structure, which is also confirmed by Electron Diffraction (ED) pattern. The average particle size determined from XRD data with the help of Debye-Scherrer equation is about 6 nm. The particle size can be further verified by Transmission Electron Microscopy (TEM) studies.  

Exploring the interaction of l-cysteine capped CuS nanoparticles with bovine serum albumin (BSA): a spectroscopic study

RSC Advances ◽  
2016 ◽  
Vol 6 (63) ◽  
pp. 58288-58295 ◽  
Author(s):  
S. Prasanth ◽  
D. Rithesh Raj ◽  
T. V. Vineeshkumar ◽  
Riju K. Thomas ◽  
C. Sudarsanakumar
Keyword(s):  
Particle Size ◽  
Bovine Serum Albumin ◽  
Serum Albumin ◽  
Bovine Serum ◽  
Copper Sulfide ◽  
Average Particle Size ◽  
Precipitation Method ◽  
Average Particle ◽  
Spectroscopic Techniques ◽  
Co Precipitation

l-Cysteine capped copper sulfide nanoparticles with an average particle size of 6 nm were synthesized using a chemical co-precipitation method and their interactions with bovine serum albumin were explored using various spectroscopic techniques.

Preparation of Nanostructured Metal Ferrite Particles by Sonochemistry

2005 ◽  
Vol 277-279 ◽  
pp. 1044-1048 ◽  
Author(s):  
Eun Hee Kim ◽  
Hyo Sook Lee ◽  
Hui Ping Shao
Keyword(s):  
Magnetic Field ◽  
Particle Size ◽  
Cobalt Ferrite ◽  
Average Particle Size ◽  
Iron Chloride ◽  
Precipitation Method ◽  
Average Particle ◽  
Sonochemical Method ◽  
Iron Ferrite ◽  
Co Precipitation

Nanostructured iron and cobalt ferrite particles were prepared from iron chloride and cobalt chloride, respectively, using the sonochemical method. The particles were compared with those synthesized using the co-precipitation method. The properties of the particles were characterized using various techniques, such as XRD, TEM, VSM and a SQUID magnetometer. The iron ferrite particles had an average particle size of about 15 nm and a magnetization value of 83 emu/g at a magnetic field of 50 kOe, while the particle size of cobalt ferrite was about 5 nm and its magnetization value was 33 emu/g at the same magnetic field.

Characterization of CeO2 Fine Particles Prepared by the Homogeneous Precipitation Method with a Mixed Solutionof Ethylene Glycol and Polyethylene Glycol

2004 ◽  
Vol 19 (4) ◽  
pp. 1087-1092 ◽  
Author(s):  
Naofumi Uekawa ◽  
Masayuki Ueta ◽  
Yong Jun Wu ◽  
Kazuyuki Kakegawa
Keyword(s):  
Particle Size ◽  
Polyethylene Glycol ◽  
Ethylene Glycol ◽  
Fine Particles ◽  
Average Particle Size ◽  
Weight Ratio ◽  
Cerium Nitrate ◽  
Precipitation Method ◽  
Average Particle ◽  
Nitrate Hydrate

Cerium oxide (CeO2) nanoparticles were obtained by heating a polyethylene glycol (PEG) solution of cerium nitrate hydrate [Ce(NO3)3 6H2O] at 383 K for 3 h. When the PEG, whose molecular weight was 20,000, was used for the preparation, the monodispersed CeO2, whose particle size was about 102 nm, was obtained. When the mixture of PEG20,000 and ethylene glycol (EG) was used to prepare the PEG solution of cerium nitrate hydrate, the average particle size increased from 102 nm to 660 nm with an increase in the EG content of the solution. The pore structure in the obtained CeO2 particles also depended on the weight ratio between EG and PEG20,000.

scholarly journals Crystal structure, optical and magnetic properties of PrFeO3 nanoparticles prepared by modified co-precipitation method

2020 ◽  
Vol 14 (4) ◽  
pp. 355-361
Author(s):  
Anh Nguyen ◽  
Ngoc Nguyen ◽  
Irina Mittova ◽  
Nikolai Perov ◽  
Valentina Mittova ◽  
...  
Keyword(s):  
Particle Size ◽  
Single Phase ◽  
Average Particle Size ◽  
Precipitation Method ◽  
Average Particle ◽  
Strong Adsorption ◽  
Different Temperatures ◽  
Paramagnetic Materials ◽  
Co Precipitation ◽  
Potential Use

In this work, PrFeO3 nanoparticles were synthesized by modified co-precipitation method and annealed at different temperatures up to 850?C. The annealed PrFeO3 nanoparticles have single phase orthorhombic structure and the average particle size of 25-30 nm. Due to the very small particle size the prepared PrFeO3 nanoparticles are capable of being used as photocatalyst materials thanks to their strong adsorption bands at 230-400 nm and 400-800 nm observed from the UV-Vis spectra. Additionally, the PrFeO3 nanoparticles are paramagnetic materials with Hc ~ 10Oe and Mr ~ 0. These findings demonstrate their potential use not only as photocatalysts, but also as magnetic materials.

Synthesis and Studying Induction Heating of Mn1-xZnxFe2O4 (x=0-0.5) Magnetic Nanoparticles for Hyperthermia Treatments

2021 ◽  
Vol 882 ◽  
pp. 200-218
Author(s):  
S. Mahmood Hussein ◽  
T.H. Mubarak ◽  
S.M. Ali Ridha ◽  
Jasim Al-Zanganawee
Keyword(s):  
Particle Size ◽  
Relaxation Time ◽  
Magnetic Nanoparticles ◽  
Smart Materials ◽  
Average Particle Size ◽  
Superparamagnetic Nanoparticles ◽  
Soft Magnetic Materials ◽  
Precipitation Method ◽  
Average Particle ◽  
Co Precipitation

The recent development of the using the magnetic nanoparticles for hyperthermia treatments emphasizes the needed of smart materials to become a safety for heat therapy. Self-regulate magnetic nanoparticles of MnZnFe2O4 may be proper for thermal treatments. Structure and magnetic properties of the synthesis Mn1-xZnx Fe2O4 with x=0- 0.5 by step 0.1were studied. Superparamagnetic nanoparticles of MnZnFe2O4 were prepared by co-precipitation method, followed that heat treatment in the autoclave reactor. XRD results showed that is difficult to prepare MnZnFe2O4 directly using the co-precipitation method. Preparation method yield nanoparticles with spherical shape and there is a slight change in the particle size distribution, also observed shrinkage occurs in the particle size after heat treatments, the average particle size was estimated about 20nm as confirmed by FESEM images. FTIR spectra of samples showed two distinct absorption peaks in the range ~ 617 – 426 (cm-1) related to stretching vibrations of the (Fe-O) in the tetrahedral and octahedral side respectively. Magnetic measurements were carried out using (VSM), M-H curves indicate typical soft magnetic materials and particles so small to be identical superparamagnetic nanoparticles. Heating ability of water based colloidal dispersions of samples were studied under magnetic field strength 6.5kA/m and the frequency 190 kHz, and the results showed when increasing Zn2+ to x=0.3 or more the samples not heated up. Depending on the heating curve susceptibility, effective relaxation time and Néel relaxation time , were determined.

SYNTHESIS, CHARACTERIZATION, AND OPTICAL PROPERTIES OF Y-DOPED ZnO NANOPARTICLES

NANO ◽  
2009 ◽  
Vol 04 (04) ◽  
pp. 225-232 ◽  
Author(s):  
TALAAT M. HAMMAD ◽  
JAMIL K. SALEM ◽  
ROGER G. HARRISON
Keyword(s):  
Particle Size ◽  
Electron Microscope ◽  
Zno Nanoparticles ◽  
Average Particle Size ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Doped Zno ◽  
Size And Morphology

Zinc oxide ( ZnO ) and yttrium-doped ZnO nanoparticles with particle size in the nanometer range have been successfully synthesized by the alkali precipitation method. The nanoparticle size and morphology have been investigated by X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM). The average particle size of Y-doped ZnO nanoparticles is about 17–29 nm. The absorption and photoluminescence (PL) spectra of the undoped and doped ZnO nanoparticles were also investigated. The optical band gap of ZnO nanoparticles can be tuned from 3.27 to 3.40 eV with increasing yittrium doping levels from 0 to 5%. The nanoparticles gave two emission peaks, one at around 376 nm and the other at 500 nm.

Sign in / Sign up

Export Citation Format

Share Document