scholarly journals Calorimetric study on Bi-Cu-Sn alloys

2019 ◽  
Vol 38 (2019) ◽  
pp. 541-546
Author(s):  
Jolanta Romanowska
Keyword(s):  
Differential Scanning Calorimetry ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Temperature Interval ◽  
Energy Dispersive Spectrometer ◽  
Energy Dispersive ◽  
Calorimetric Study ◽  
Calorimetric Investigation ◽  
Scanning Calorimetry ◽  
Scanning Electron

AbstractThe paper presents results of calorimetric investigation of the Bi-Cu-Sn system by means of differential scanning calorimetry (DSC) at the temperature interval 25-1250∘C, Values of liquidus, solidus and invariant reactions temperatures, as well as melting enthalpies of the selected alloys were determined. Microstructure investigation of the alloys were performed by the use of a scanning electron microscope (SEM) equipped with an energy-dispersive spectrometer (EDS).

scholarly journals Effect of Cerium on the Microstructure and Inclusion Evolution of C-Mn Cryogenic Vessel Steels

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5262
Author(s):  
Liping Wu ◽  
Jianguo Zhi ◽  
Jiangshan Zhang ◽  
Bo Zhao ◽  
Qing Liu
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Heterogeneous Nucleation ◽  
Energy Dispersive Spectrometer ◽  
Energy Dispersive ◽  
Vessel Steel ◽  
Cryogenic Vessel ◽  
Central Segregation ◽  
Scanning Electron

The effects of Cerium (Ce) were studied on the casting slab quality, microstructure, and inclusion evolution of cryogenic vessel steel. An optical metallographic microscope, scanning electron microscope, energy dispersive spectrometer, and Thermo-calc thermodynamic software were used for characterization and analysis. The results indicated that the central segregation was significantly improved after adding Ce and reached the lowest level when the content of Ce was 0.0009 wt.%. Meanwhile, the presence of Ce reduces the size of ferrite and improves pearlite morphology. Ce also enables the modification of Al2O3 and MnS + Ti4C2S2 inclusions into ellipsoid CeAlO3 and spherical Ce2O2S + Ti4C2S2 composite inclusions, respectively, which are easier to remove. The formed Ce2O2S inclusions are fine and can work as heterogeneous nucleation points to refine the microstructure of steel.

scholarly journals Karakterisasi Paduan AlMgSi Untuk Kelongsong Bahan Bakar U3Si2/Al Densitas Uranium 5,2 gU/cm3

2018 ◽  
Vol 24 (1) ◽  
Author(s):  
Aslina Br. Ginting ◽  
Supardjo Supardjo ◽  
Yanlinastuti Yanlinastuti ◽  
Dian Anggraini ◽  
Boybul Boybul
Keyword(s):  
Thermal Analysis ◽  
Differential Scanning Calorimetry ◽  
Differential Thermal Analysis ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Interface Bonding ◽  
Scanning Calorimetry ◽  
Scanning Electron

Meningkatnya densitas uranium dari 2,96 gU/cm3 menjadi 5,2 gU/cm3 bahan bakar U3Si2/Al harus diikuti dengan penggunaan kelongsong yang kompatibel. Bahan bakar berdensitas tinggi mempunyai kekerasan yang tinggi, sehingga bila menggunakan paduan AlMg2 sebagai kelongsong dapat menyebabkan terjadi dogbone pada saat perolan. Selain fenomena dogbone, pada saat bahan bakar tersebut digunakan di reaktor dapat terjadi swelling karena meningkatnya hasil fisi maupun burn up. Oleh karena itu, perlu dicari pengganti bahan kelongsong untuk bahan bakar U3Si2/Al densitas tinggi. Pada penelitian ini telah dilakukan karakterisasi paduan AlMgSi sebagai kandidat pengganti kelongsong AlMg2. Karakterisasi yang dilakukan meliputi analisis termal, kekerasan, mikrostruktur dan laju korosi. Analisis termal dilakukan menggunakan DTA (Differential Thermal Analysis) dan DSC (Differential Scanning Calorimetry). Analisis kekerasan menggunakan alat uji kekerasan mikro, mikrostruktur menggunakan SEM (Scanning Electron Microscope) dan analisis laju korosi dilakukan dengan pemanasan pada temperatur 150 oC selama 77 jam di dalam autoclave. Hasil analisis menunjukkan bahwa kelongsong AlMgSi maupun AlMg2 mempunyai kompatibilitas panas dengan bahan bakar U3Si2/Al cukup stabil hingga temperatur 650 oC. Kelongsong AlMgSi mempunyai kekerasan sebesar 115 HVN dan kelongsong AlMg2 sebesar 70,1 HVN. Sementara itu, analisis mikrostruktur menunjukkan bahwa morfologi ikatan antarmuka (interface bonding) kelongsong AlMgSi lebih baik dari kelongsong AlMg2, demikian halnya dengan laju korosi bahwa kelongsong AlMgSi mempunyai laju korosi lebih kecil dibanding kelongsong AlMg2. Hasil karakterisasi termal, kekerasan, mikrostruktur dan laju korosi menunjukkan bahwa PEB U3Si2/Al densitas 5,2 gU/cm3 menggunakan kelongsong AlMgSi lebih baik dibanding PEB U3Si2/Al  densitas 5,2 gU/cm3  menggunakan kelongsong AlMg2.Kata kunci: U3Si2/Al, densitas 5,2 gU/cm3, kelongsong AlMgSi dan AlMg2.

The Mechanical Properties and Thermodynamic Study on Polypropylene/Talc Composites

2014 ◽  
Vol 915-916 ◽  
pp. 751-754
Author(s):  
Shao Hui Wang
Keyword(s):  
Mechanical Properties ◽  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
Electron Microscope ◽  
Impact Strength ◽  
Scanning Electron Microscope ◽  
Stearic Acid ◽  
Crystallization Rate ◽  
Scanning Calorimetry ◽  
Scanning Electron

The composites of PP/Talc modified by stearic acid were prepared and its effect on the properties of PP/Talc composites was investigated in this paper. The tensile strength and impact strength of PP/Talc composites increased about 15% and 30% compared with pure PP respectively. Based on surface analysis by scanning electron microscope (SEM), the Talcparticles buried well in PP matrix when the Talc was coated with the stearic acid. At the same time, it was found that Talc significantly increased the crystallization temperature and crystallization rate of PP by differential scanning calorimetry (DSC).

Analysis on Bursting of Rupture Disc Made by Inconel 600 Alloy

2019 ◽  
Vol 795 ◽  
pp. 290-295
Author(s):  
Jian Qun Tang ◽  
Lu Yang Geng ◽  
Jian Ming Gong
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Fatigue Fracture ◽  
Energy Dispersive Spectrometer ◽  
Energy Dispersive ◽  
Chemical Compositions ◽  
Inconel 600 ◽  
Rupture Disc ◽  
Inconel 600 Alloy ◽  
Scanning Electron

One conventional domed slotted rupture disc, which was fabricated with Inconel 600 alloy, was used in reaction kettle. It was burst after only 2000 times of operational circles. The burst causes were investigated. Morphologies of the fracture were observed by scanning electron microscope and the relatively chemical compositions were analyzed by energy dispersive spectrometer. Meanwhile, metallographic microstructures were also observed and analyzed for the material of the failure of the rupture disc. The results show that the bursting of the rupture disc was caused by fatigue fracture.

MORFOLOGI DAN PROPERTI CAMPURAN KARET ALAM/POLYPROPYLENE YANG DIVULKANISASI DINAMIK DALAM INTERNAL MIXER

REAKTOR ◽  
2007 ◽  
Vol 11 (2) ◽  
pp. 71
Author(s):  
Bahruddin Bahruddin ◽  
Sumarno Sumarno ◽  
Gede Wibowo ◽  
Nonot Suwarno
Keyword(s):  
Differential Scanning Calorimetry ◽  
Tensile Strength ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Scanning Calorimetry ◽  
Elongation At Break ◽  
Izod Impact ◽  
Internal Mixer ◽  
Scanning Electron

Morfologi dan properti campuran (blend) karet alam jenis SIR-20/polypropylene (NR/PP) yang divulkanisasi dinamik dalam internal mixer telah dipelajari. Blend dibuat dengan rasio berat NR/PP 10/90, 20/80, 50/50, 60/40 dan 70/30 dan komposisi sulfur 3 dan 5 phr (per hundred rubber). Proses pencampuran dilakukan pada suhu 180 oC dan kecepatan rotor 60 rpm. Analisa morfologi menggunakan SEM (Scanning Electron Microscope) dan DSC (Differential Scanning Calorimetry). Properti mekanik yang diukur meliputi tensile strength, elongation at break, izod impact, tearing dan hardness, berdasarkan standar ASTM. Didapatkan bahwa peningkatan rasio NR/PP menghasilkan distribusi partikel NR yang makin merata dengan ukuran yang makin kecil. Morfologi blend menunjukkan sistem dua fasa dan vulkanisasi fasa NR terjadi secara parsial dalam matrik PP. Peningkatan rasio NR/PP dan komposisi sulfur dapat meningkatkan properti elongation at break, namun menurunkan properti tensile strength, izod impact, tearing dan hardness. Elongation at break tertinggi yang dapat diperoleh adalah 70% pada rasio blend NR/PP 70/30 dan komposisi sulfur 5 phr.

Anti-Corrosion Performance of Four Zinc-Rich Coatings

2012 ◽  
Vol 598 ◽  
pp. 561-564
Author(s):  
Zhi Ming Cao ◽  
Guo Xin Li ◽  
Yi Liang Peng ◽  
Da Wei Hu
Keyword(s):  
Differential Scanning Calorimetry ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Steel Substrate ◽  
Salt Spray ◽  
Zinc Content ◽  
Neutral Salt ◽  
Corrosion Performance ◽  
Scanning Calorimetry ◽  
Scanning Electron

Four zinc-rich coatings were applied onto steel substrate and then placed in neutral salt spray for 4000 h in order to study the anti-corrosion performance of the coatings. The results showed that the samples with two kinds of the coatings were more seriously eroded than the others. The reasons could be that the zinc particles were dispersed inhomogeneous in the binder and the zinc content was very lower than 96 wt. % obtained through the analysis of Scanning Electron Microscope and Differential Scanning Calorimetry.

Sign in / Sign up

Export Citation Format

Share Document