α-Amylase Aspergillus oryzae Immobilized on Modified Expanded Perlite

2014 ◽  
Vol 12 (1) ◽  
pp. 587-596 ◽  
Author(s):  
J. Rodriguez ◽  
F. Soria ◽  
H. Geronazzo ◽  
H. Destefanis
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Aspergillus Oryzae ◽  
Immobilized Enzyme ◽  
Maximum Activity ◽  
Free Enzyme ◽  
Expanded Perlite ◽  
Initial Activity ◽  
Optimum Ph ◽  
Scanning Electron

Abstract The α-amylase from Aspergillus oryzae was immobilized covalently onto expanded perlite (EP) and modified EP by treatment with TiO2 (EP-TiO2), dye HE3B (EP-HE3B) polyethylene terephthalate (PET)-hydrazide (EP-PET) and magnetite (EP-magnetite). The modified EP was characterized using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The supports were functionalized with aminopropyltriethoxysilane (APTES) and glutaraldehyde (GA). The optimum pH for free and immobilized α-amylase was 5.5. Temperature of maximum activity for free enzyme and immobilized enzyme on EP-HE3B was 50°C. The immobilized enzyme in EP-APTES this value was 55°C. The immobilized α-amylase in EP-APTES and EP-HE3B-APTES exhibited better thermostability than free enzyme. The immobilized derivatives showed moderate operational stability by retaining 50% of initial activity after seven successive reuses.

scholarly journals Recognition of a New Cr(VI)-Reducing Strain and Study of the Potential Capacity for Reduction of Cr(VI) of the Strain

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Chunyong Wang ◽  
Yanshan Cui
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Reduction Rate ◽  
High Tolerance ◽  
Treatment Results ◽  
Sem Images ◽  
Bacterial Surface ◽  
Potential Capacity ◽  
Optimum Ph ◽  
Scanning Electron

The biotransformation of hexavalent chromium [Cr(VI)] via Cr(VI)-reducing microorganisms is considered an ecofriendly approach to detoxify Cr(VI). A new Cr(VI)-reducing bacterium named Microbacterium sp. QH-2 was isolated in this study. Scanning electron microscopy (SEM) images showed protrusions on the bacterial surface of strain QH-2 after an 18 h incubation in media under 10 mM Cr(VI) treatment. Results of the experiments on the capacity of reducing Cr(VI) indicated that strain QH-2 could reduce 100% Cr(VI) less than 48-96 h. When media with 4 mM Cr(VI) were incubated, the fastest reduction rate of strain QH-2 could come up to 2.17 mg/L Cr(VI) h−1. Furthermore, strain QH-2 could reduce Cr(VI) over the pH between 7 and 10. The optimum pH to reduce Cr(VI) by strain QH-2 was 9. Strain QH-2 also exhibited a relatively high tolerance even to 20 mM Cr(VI). These results declared that strain QH-2 had the potential to detoxify Cr(VI) in the Cr(VI)-contaminated soil or effluent.

Removal of manganese ions from synthetic groundwater by oxidation using KMnO4 and the characterization of produced MnO2 particles

2010 ◽  
Vol 62 (8) ◽  
pp. 1719-1726 ◽  
Author(s):  
P. Phatai ◽  
J. Wittayakun ◽  
N. Grisdanurak ◽  
W. H. Chen ◽  
M. W. Wan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Test System ◽  
Manganese Ions ◽  
X Ray ◽  
Jar Test ◽  
Optimum Ph ◽  
Synthetic Groundwater ◽  
Scanning Electron

The aim of this study is to investigate the conditions for the removal of manganese ions from synthetic groundwater by oxidation using KMnO4 to keep the concentration below the allowed level (0.05 mg/L). The process includes low-level aeration and addition of KMnO4 in a Jar test system with Mn2 +  concentration of 0.50 mg/L, similar to that of natural groundwater in Taiwan. Different parameters such us aeration-pH, oxidant dose, and stirring speed were studied. Aeration alone was not sufficient to remove Mn2 +  ions completely even when the pH was increased. When a stoichiometric amount of KMnO4 (0.96 mg/L) was used, a complete Mn2 +  removal was achieved within 15 min at an optimum pH of 8.0. As the amount of KMnO4 was doubled, lower removal efficiency was obtained because the oxidant also generated manganese ions. The removal of Mn2 +  ions could be completed at pH 9.0 using an oxidant dose of 0.48 mg/L because Mn2 +  could be sorbed onto the MnO2 particles. Finally, The MnO2 particles were characterized using scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX).

scholarly journals Immobilization of Catalase on Chitosan/ZnO and Chitosan/ZnO/Fe2O3 Nanocomposites: A Comparative Study

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 820
Author(s):  
Reda M. El-Shishtawy ◽  
Nahed S. E. Ahmed ◽  
Yaaser Q. Almulaiky
Keyword(s):  
Half Life ◽  
Immobilized Enzyme ◽  
Enzyme Stability ◽  
Catalytic Performance ◽  
Free Enzyme ◽  
Initial Activity ◽  
Reaction Systems ◽  
Optimum Ph ◽  
Immobilized Catalase ◽  
System Properties

The strong catalytic performance, eco-friendly reaction systems, and selectivity of enzyme-based biocatalysts are extremely interesting. Immobilization has been shown to be a good way to improve enzyme stability and recyclability. Chitosan-incorporated metal oxides, among other support matrices, are an intriguing class of support matrices for the immobilization of various enzymes. Herein, the cross-linked chitosan/zinc oxide nanocomposite (CS/ZnO) was synthesized and further improved by adding iron oxide (Fe2O3) nanoparticles. The final cross-linked CS/ZnO/Fe2O3 nanocomposite was used as an immobilized support for catalase and is characterized by SEM, EDS, and FTIR. The nanocomposite CS/ZnO/Fe2O3 enhanced the biocompatibility and immobilized system properties. CS/ZnO/Fe2O3 achieved a higher immobilization yield (84.32%) than CS/ZnO (37%). After 10 repeated cycles, the remaining immobilized catalase activity of CS/ZnO and CS/ZnO/Fe2O3 was 14% and 45%, respectively. After 60 days of storage at 4 °C, the remaining activity of immobilized enzyme onto CS/ZnO and CS/ZnO/Fe2O3 was found to be 32% and 47% of its initial activity. The optimum temperature was noticed to be broad at 25–30 °C for the immobilized enzyme and 25 °C for the free enzyme. Compared with the free enzyme optimum pH (7.0), the optimum pH for the immobilized enzyme was 7.5. The Km and Vmax values for the free and immobilized enzyme on CS/ZnO, and the immobilized enzyme on CS/ZnO/Fe2O3, were found to be 91.28, 225.17, and 221.59 mM, and 10.45, 15.87, and 19.92 µmole ml−1, respectively. Catalase immobilization on CS/ZnO and CS/ZnO/Fe2O3 offers better stability than free catalase due to the enzyme’s half-life. The half-life of immobilized catalase on CS/ZnO/Fe2O3 was between 31.5 and 693.2 min.

scholarly journals Immobilization ofAspergillus Oryzae β-Galactosidase on Newly Prepared Porous Poly(GMA-ST)

2011 ◽  
Vol 8 (3) ◽  
pp. 1232-1237 ◽  
Author(s):  
Sun Sufang ◽  
Xu Xiaobing
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Enzyme Activity ◽  
Kinetic Data ◽  
Immobilized Enzyme ◽  
Lauryl Alcohol ◽  
Optimum Conditions ◽  
Porous Poly ◽  
Scanning Electron

The macroporous and reactive carriers polyGMA-ST was synthesized simultaneously with a mixture of cyclohexanol and lauryl alcohol as liquid pore-forming agents and nano-calcium carbonate as solid one by bulk copolymerization. After the polymer was smashed, particles with diameters ranging 0.15 mm to 0.30 mm were taken as the carrier and the Scanning electron microscopy (SEM) micrographs were done to characterize its surface structure. Under the optimum conditions,β-galactosidaseAspergillus oryzaewas immobilized on the supporter obtained above, its enzyme activity could reach to 535.11U/g dry carrier and the activity recovery of the immobilizedβ-galactosidase was 79.63%. Meanwhile, the basic property and the kinetic data of the immobilized enzyme were determined and compared with those of the free enzyme and satisfactory results were obtained in pH stability, thermal stability and operational stability. The conclusion obtained here indicated that the ploy(GMA-co-ST) prepared concurrently with liquid and solid porogen was suitable to immobilize enzyme.

Pathogenesis of Human Hair Defects

1974 ◽  
Vol 32 ◽  
pp. 12-13
Author(s):  
P.S. Porter ◽  
T. Aoyagi ◽  
R. Matta
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Human Hair ◽  
Standard Techniques ◽  
Scanning Electron

Using standard techniques of scanning electron microscopy (SEM), over 1000 human hair defects have been studied. In several of the defects, the pathogenesis of the abnormality has been clarified using these techniques. It is the purpose of this paper to present several distinct morphologic abnormalities of hair and to discuss their pathogenesis as elucidated through techniques of scanning electron microscopy.

Ultrastructural Analysis of the Salivary Glands of Gromphadorhina Portentosa (Schaum)

1977 ◽  
Vol 35 ◽  
pp. 638-639
Author(s):  
P.J. Dailey
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Salivary Glands ◽  
Secretory Vesicles ◽  
The Past ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
Gromphadorhina Portentosa ◽  
Scanning Electron ◽  
Topographical Relief

The structure of insect salivary glands has been extensively investigated during the past decade; however, none have attempted scanning electron microscopy (SEM) in ultrastructural examinations of these secretory organs. This study correlates fine structure by means of SEM cryofractography with that of thin-sectioned epoxy embedded material observed by means of transmission electron microscopy (TEM).Salivary glands of Gromphadorhina portentosa were excised and immediately submerged in cold (4°C) paraformaldehyde-glutaraldehyde fixative1 for 2 hr, washed and post-fixed in 1 per cent 0s04 in phosphosphate buffer (4°C for 2 hr). After ethanolic dehydration half of the samples were embedded in Epon 812 for TEM and half cryofractured and subsequently critical point dried for SEM. Dried specimens were mounted on aluminum stubs and coated with approximately 150 Å of gold in a cold sputtering apparatus.Figure 1 shows a cryofractured plane through a salivary acinus revealing topographical relief of secretory vesicles.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Spontaneous Cataract in Nude Athymic Mice

1977 ◽  
Vol 35 ◽  
pp. 512-513
Author(s):  
Ronald H. Bradley ◽  
R. S. Berk ◽  
L. D. Hazlett
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nude Mouse ◽  
Cellular Immunity ◽  
Phosphate Buffer ◽  
Osmium Tetroxide ◽  
Athymic Mice ◽  
Transmission Microscopy ◽  
Mouse Lens ◽  
Scanning Electron

The nude mouse is a hairless mutant (homozygous for the mutation nude, nu/nu), which is born lacking a thymus and possesses a severe defect in cellular immunity. Spontaneous unilateral cataractous lesions were noted (during ocular examination using a stereomicroscope at 40X) in 14 of a series of 60 animals (20%). This transmission and scanning microscopic study characterizes the morphology of this cataract and contrasts these data with normal nude mouse lens.All animals were sacrificed by an ether overdose. Eyes were enucleated and immersed in a mixed fixative (1% osmium tetroxide and 6% glutaraldehyde in Sorenson's phosphate buffer pH 7.4 at 0-4°C) for 3 hours, dehydrated in graded ethanols and embedded in Epon-Araldite for transmission microscopy. Specimens for scanning electron microscopy were fixed similarly, dehydrated in graded ethanols, then to graded changes of Freon 113 and ethanol to 100% Freon 113 and critically point dried in a Bomar critical point dryer using Freon 13 as the transition fluid.

Scanning and Transmission Microscopy of Nematocyst Batteries in Epitheliomuscular Cells of Hydra

1971 ◽  
Vol 29 ◽  
pp. 410-411 ◽  
Author(s):  
Jane A. Westfall ◽  
S. Yamataka ◽  
Paul D. Enos
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Osmium Tetroxide ◽  
External Surface ◽  
Three Dimensional ◽  
Surface Structures ◽  
Transmission Microscopy ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Scanning Electron

Scanning electron microscopy (SEM) provides three dimensional details of external surface structures and supplements ultrastructural information provided by transmission electron microscopy (TEM). Animals composed of watery jellylike tissues such as hydras and other coelenterates have not been considered suitable for SEM studies because of the difficulty in preserving such organisms in a normal state. This study demonstrates 1) the successful use of SEM on such tissue, and 2) the unique arrangement of batteries of nematocysts within large epitheliomuscular cells on tentacles of Hydra littoralis.Whole specimens of Hydra were prepared for SEM (Figs. 1 and 2) by the fix, freeze-dry, coat technique of Small and Màrszalek. The specimens were fixed in osmium tetroxide and mercuric chloride, freeze-dried in vacuo on a prechilled 1 Kg brass block, and coated with gold-palladium. Tissues for TEM (Figs. 3 and 4) were fixed in glutaraldehyde followed by osmium tetroxide. Scanning micrographs were taken on a Cambridge Stereoscan Mark II A microscope at 10 KV and transmission micrographs were taken on an RCA EMU 3G microscope (Fig. 3) or on a Hitachi HU 11B microscope (Fig. 4).

Microbulldozing and Microchiseling

1969 ◽  
Vol 27 ◽  
pp. 134-135
Author(s):  
J.N. Ramsey ◽  
D.P. Cameron ◽  
F.W. Schneider
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Material Handling ◽  
Microprobe Analysis ◽  
Foreign Matter ◽  
Specific Location ◽  
Potential Problems ◽  
Knoop Indenter ◽  
Scanning Electron ◽  
Microhardness Tester

As computer components become smaller the analytical methods used to examine them and the material handling techniques must become more sensitive, and more sophisticated. We have used microbulldozing and microchiseling in conjunction with scanning electron microscopy, replica electron microscopy, and microprobe analysis for studying actual and potential problems with developmental and pilot line devices. Foreign matter, corrosion, etc, in specific locations are mechanically loosened from their substrates and removed by “extraction replication,” and examined in the appropriate instrument. The mechanical loosening is done in a controlled manner by using a microhardness tester—we use the attachment designed for our Reichert metallograph. The working tool is a pyramid shaped diamond (a Knoop indenter) which can be pushed into the specimen with a controlled pressure and in a specific location.

Sign in / Sign up

Export Citation Format

Share Document