scholarly journals Insights into the multistep transformation of titanate nanotubes into nanowires and nanoribbons

2016 ◽  
Vol 34 (4) ◽  
pp. 691-702 ◽  
Author(s):  
Agnieszka Baszczuk ◽  
Marek Jasiorski ◽  
Beata Borak ◽  
Jerzy Wódka
Keyword(s):  
Treatment Duration ◽  
Hydrothermal Reaction ◽  
X Ray Diffraction ◽  
One Dimensional ◽  
X Ray ◽  
Transmission Electron ◽  
Morphology And Structure ◽  
Different Types ◽  
Increasing Temperature

AbstractDifferent types of titanate one-dimensional nanostructured materials were synthesized and characterized using scanning and transmission electron microscopy, X-ray diffraction and Raman spectroscopy. The results presented in this work unquestionably showed dependence of morphology and structure of the titanate nanopowders on parameters of hydrothermal synthesis. It was found that nanotubes, nanowires and nanoribbons are three unavoidable kinetic products of hydrothermal reaction. Moreover, increasing temperature of reaction or hydrothermal treatment duration results in acceleration of nanotube-nanowire-nanoribbon transformation. However, the sequence of titanate morphology transformation is invariable. The detailed studies further revealed that the crystal structure of hydrothermally prepared nanotubes and nanowires are indistinguishable but the determination of the exact structure is practically impossible. Because of higher crystallinity, the structure of nanoribbons can be established. It was shown that it corresponds to the monoclinic layered trititanic acid H2Ti3O7 and is isostructural with sodium derivatives Na2_xHxTi3O7.nH20 (with x near 2).

Synthesis and Properties of GaN Nanostructures

2005 ◽  
Vol 475-479 ◽  
pp. 3367-3370
Author(s):  
Hong-Lei Ma ◽  
Cheng Shan Xue ◽  
Ying Ge Yang ◽  
Hui Zhao Zhang ◽  
Jin Ma ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hexagonal Wurtzite Structure ◽  
X Ray Diffraction ◽  
High Quality ◽  
One Dimensional ◽  
X Ray ◽  
Gan Nanowires ◽  
Transmission Electron ◽  
Morphology And Structure ◽  
Scanning Electron

One-dimensional GaN nanostructure films were successfully synthesized by the recently developed sputtering post-nitridation technique. The morphology and structure of GaN nanowires are investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The results indicate that the crystalline GaN nanostructures have a hexagonal wurtzite structure, and there is not any other phase such as Ga2O3 or Ga in the specimen. It also confirms that high quality crystal was obtained in the resulting sample due to the lattice defects decreased and the crystallinity improved in the process of nitridation at high temperature. The growth mechanism of the GaN nanostructures is briefly discussed.

Formalism for the determination of intermediate stress gradients using X-ray diffraction

2009 ◽  
Vol 42 (2) ◽  
pp. 192-197 ◽  
Author(s):  
Thomas Gnäupel-Herold
Keyword(s):  
Lattice Strain ◽  
Narrow Line ◽  
X Ray Diffraction ◽  
Beam Spot ◽  
Strain Measurements ◽  
One Dimensional ◽  
X Ray ◽  
Stress Gradients ◽  
Shaped Beam

A method is outlined that allows the determination of one-dimensional stress gradients at length scales greater than 0.2 mm. By using standard four-circle X-ray diffractometer equipment and simple aperture components, length resolutions down to 0.05 mm in one direction can be achieved through constant orientation of a narrow, line-shaped beam spot. Angle calculations are given for the adjustment of goniometer angles, and for the effective azimuth and tilt of the scattering vector for general angle settings in a four-circle goniometer. The latter is necessary for the computation of stresses from lattice strain measurements.

Determination of crystallinity of Chinese handmade papers by means of X-ray diffraction

2020 ◽  
Vol 41 (2) ◽  
pp. 69-86
Author(s):  
Peng Liu ◽  
Hongbin Zhang ◽  
Sinong Wang ◽  
Hui Yu ◽  
Bingjie Lu ◽  
...  
Keyword(s):  
Negative Influence ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Eulaliopsis Binata ◽  
Different Types ◽  
Powder Samples ◽  
Xrd Patterns ◽  
Xrd Method

AbstractThe crystallinity indices (CrI) of Chinese handmade papers were investigated using the X-ray diffraction (XRD) method. Four Chinese handmade papers, Yingchun, Zhuma, Yuanshu and Longxucao papers were used as model substrates of mulberry bark, ramie, bamboo and Eulaliopsis binata papers, respectively. Two forms of the paper samples, paper sheets and their comminuted powders, were used in this study. The results showed that their XRD patterns belong to the cellulose-I type and Iβ dominates the cellulose microstructure of these paper samples. Moreover, it was found that the microstructures and CrIs of cellulose of these papers were changed by the grinding treatment. This work suggested that the sheet form of the handmade papers is suitable to determine CrI by XRD, despite the contribution of non-cellulosic components in the papers. The order of CrIs for these paper sheet samples was Yingchun, Zhuma, Longxucao and Yuanshu papers. Besides CrIs, differences in cross-sectional areas of the crystalline zone of cellulose can be used for comparing different types of handmade papers. It was also found that the CrIs and crystallite size of paper cellulose varied between the sheet samples and the powder samples, illustrating that the pulverisation has a negative influence on the microstructure of the handmade papers.

scholarly journals PREPARATION OF NICKEL NANOWIRES AND EFFECTS OF SYNTHESIS CONDITIONS ON THEIR MORPHOLOGY

2019 ◽  
Vol 57 (3A) ◽  
pp. 21
Author(s):  
Minh Truong Xuan Nguyen ◽  
Thu Thi Minh Bui ◽  
Cuc Thi Le ◽  
Linh Huu Nguyen ◽  
Y Ngoc Pham ◽  
...  
Keyword(s):  
Synthesis Process ◽  
X Ray Diffraction ◽  
One Dimensional ◽  
X Ray ◽  
Synthesis Conditions ◽  
Nickel Nanowires ◽  
Transmission Electron ◽  
Experimental Parameters ◽  
Polyol Medium ◽  
Nickel Nanostructures

Nickel nanostructures prepared by various methods have received considerable attentions due to their numerous applications. In this study, one-dimensional nickel nanowires (NiNWs) were synthesized by the reduction of nickel (II) chloride in polyol medium. Poly (vinylpyrrolidone) (PVP) served as the surfactant and hydrazine hydrate was used as the reductant. The effects of different experimental parameters, i.e. concentration of Ni2+, volume of N2H4, concentration of PVP and reaction temperature on the formation and morphology of NiNWs were studied. The structure, composition and surface morphology of the materials were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results showed that the morphology as well as the diameter of NiNWs could be effectively controlled by adjusting parameters of the synthesis process.

Evolution of Crystalline Phase and Morphology of the Products Formed during the Hydrothermal Synthesis of Y2O3 Powders

2011 ◽  
Vol 189-193 ◽  
pp. 1275-1279
Author(s):  
Ying Wang ◽  
Gao Yang Zhao ◽  
Li Yuan
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Treatment ◽  
Crystalline Phase ◽  
Hydrothermal Reaction ◽  
Yttrium Nitrate ◽  
Temperature Reaction ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
X Ray ◽  
Transmission Electron

The crystalline phase and morphology of the products formed during the synthesis of yttrium oxide via the hydrothermal treatment yttrium nitrate were characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. Products with high OH/NO3ratios are formed with the increasing of hydrothermal treatment. The crystalline phases are evolved from Y2(OH)5.14(NO3)0.86•H2O toY4O(OH)9(NO3) and finally Y(OH)3. The hydrothermal reaction conditions play an important role in the synthesis of the microstructures. Results show the particle size and final morphology of samples could be controlled by reaction temperature, reaction time, and OH-concentration. Sheets, hexagonal and needle-like Y2O3powders are obtained with the hydrothermal treatment of yittrium nitrate at 180 oC to 200oC for 2-8 hours at pH 9-13.

scholarly journals Synthesis, structure, semiconductive and photoluminescent properties of [{Eu(NC5H4COOH)3(H2O)2}(1.5ZnCl4)·(2H2O)]n

2009 ◽  
Vol 74 (7) ◽  
pp. 755-764 ◽  
Author(s):  
Wen-Tong Chen ◽  
Xiao-Niu Fang ◽  
Qiu-Yan Luo ◽  
Ya-Ping Xu
Keyword(s):  
Hydrothermal Reaction ◽  
Isonicotinic Acid ◽  
Luminescence Spectra ◽  
X Ray Diffraction ◽  
Monoclinic System ◽  
One Dimensional ◽  
X Ray ◽  
Organic Hybrid ◽  
Hybrid Complex ◽  
A Cell

A novel bimetallic 4f-3d metal-isonicotinic acid inorganic-organic hybrid complex [{Eu(NC5H4COOH)3(H2O)2}(1.5ZnCl4)?(2H2O)]n (1) was synthesized via a hydrothermal reaction and structurally characterized by single- crystal X-ray diffraction. Complex 1 crystallizes in the space group C2/c of the monoclinic system with eight formula units in a cell: a = 23.878(8) ?, b = 20.573(6) ?, c = 15.358(5) ?, ? = 127.276(5)?, V = 6003(3) ?3, C18H23Cl6EuN3O10Zn1.5, Mr = 904.11 g/mol, ? = 2.001 g/cm3, S = 1.077, ?(MoK?) = 3.846 mm-1, F(000) = 3536, R = 0.0270 and wR = 0.0672. Complex 1 has a characteristic, one-dimensional polycationic chain-like structure. A photoluminescent investigation revealed that the title complex displays intense emissions in the orange and red regions. The luminescence spectra show that the red emission is stronger than the orange emission. Optical absorption spectra of 1 revealed the presence of an optical gap of 3.56 eV.

Structural, morphological, and magnetic study of nanocrystalline cobalt-copper powders synthesized by the polyol process

1995 ◽  
Vol 10 (6) ◽  
pp. 1546-1554 ◽  
Author(s):  
G.M. Chow ◽  
L.K. Kurihara ◽  
K.M. Kemner ◽  
P.E. Schoen ◽  
W.T. Elam ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Copper Powders ◽  
Face Centered ◽  
Increasing Temperature ◽  
X Ray Absorption

Nanocrystalline CoxCu100−x (4 ⋚ x ⋚ 49 at. %) powders were prepared by the reduction of metal acetates in a polyol. The structure of powders was characterized by x-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), extended x-ray absorption fine structure (EXAFS) spectroscopy, solid-state nuclear magnetic resonance (NMR) spectroscopy, and vibrating sample magnetometry (VSM). As-synthesized powders were composites consisting of nanoscale crystallites of face-centered cubic (fcc) Cu and metastable face-centered cubic (fcc) Co. Complementary results of XRD, HRTEM, EXAFS, NMR, and VSM confirmed that there was no metastable alloying between Co and Cu. The NMR data also revealed that there was some hexagonal-closed-packed (hcp) Co in the samples. The powders were agglomerated, and consisted of aggregates of nanoscale crystallites of Co and Cu. Upon annealing, the powders with low Co contents showed an increase in both saturation magnetization and coercivity with increasing temperature. The results suggested that during preparation the nucleation of Cu occurred first, and the Cu crystallites served as nuclei for the formation of Co.

Laccase Biosensor Based on Ag-Doped TiO2 Nanoparticles on CuCNFs for the Determination of Hydroquinone

NANO ◽  
2016 ◽  
Vol 11 (12) ◽  
pp. 1650132 ◽  
Author(s):  
Jie Yang ◽  
Dawei Li ◽  
Zengyuan Pang ◽  
Qufu Wei
Keyword(s):  
Electron Microscopy ◽  
Storage Stability ◽  
Electrochemical Impedance ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
New Material ◽  
And Storage

A novel nanomaterial composed of copper and carbon nanofibers (CuCNFs) decorated with Ag-doped TiO2 (Ag–TiO[Formula: see text] nanoparticles was prepared through electrospinning, carbonization and solvothermal treatment. The composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The obtained composites were mixed with laccase and Nafion to construct novel hydroquinone biosensor. The electrochemical behavior of the novel biosensor was studied using cyclic voltammetry (CV) and chronoamperometry. The results demonstrated that the biosensor possessed a wide detection linear range (1.20–176.50[Formula: see text][Formula: see text]M), a good selectivity, repeatability, reproducibility and storage stability. This work provides a new material to design more efficient laccase (Lac) based biosensor for hydroquinone detection.

Hydrothermal Synthesis and Morphology Evolution of Perovskite PbTiO3 Crystals with Different Lead Sources

2013 ◽  
Vol 745-746 ◽  
pp. 309-314 ◽  
Author(s):  
Si Min Yin ◽  
Gang Xu ◽  
Zhao Hui Ren ◽  
Chun Ying Chao ◽  
Ge Shen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Hydrothermal Reaction ◽  
Reaction System ◽  
Morphology Evolution ◽  
X Ray Diffraction ◽  
Reaction Route ◽  
X Ray ◽  
Transmission Electron ◽  
Lead Source

Perovskite lead titanate crystals with various morphologies were successfully synthesized via a hydrothermal reaction route with different lead sources. X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM) were employed to characterize the phase composition and the morphology of the synthesized products. In order to investigate the effect of the lead source on the phase formation and morphology evolution of the synthesized pervoskite PbTiO3 crystals, PbO, PbF2, PbSO4 and Pb (CH3COO)3 ·3H2O, were used as starting precursor lead source introduced into the hydrothermal reaction system, respectively. Accordingly, perovskite PbTiO3 brken cubes, irregular particles, cubic particles, and microplates were obtained, respectively. Based on the experimental results, the effect of lead source was simply discussed.

Synthesis and Properties of SnO2 One-Dimensional Nanomaterials on Pt-Coated Substrates

2006 ◽  
Vol 517 ◽  
pp. 21-24
Author(s):  
Hyoun Woo Kim ◽  
S.H. Shim
Keyword(s):  
Electron Microscopy ◽  
Thermal Evaporation ◽  
Light Emission ◽  
Growth Mechanisms ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
One Dimensional ◽  
X Ray ◽  
Transmission Electron ◽  
Tetragonal Rutile Structure

We have synthesized the belt-like structures of tin oxide (SnO2) by carrying out the thermal evaporation of solid Sn powders. We have analyzed the samples with scanning electron microscopy, X-ray diffraction, transmission electron microscopy and photoluminescence (PL). The obtained nanobelts were single crystalline with a tetragonal rutile structure. PL spectrum exhibited the visible light emission. We have discussed the possible growth mechanisms.

Sign in / Sign up

Export Citation Format

Share Document