scholarly journals High-throughput fabrication and calibration of compact high-sensitivity plasmonic lab-on-chip for biosensing

2016 ◽  
Vol 3 (1) ◽  
Author(s):  
E. Gazzola ◽  
A. Pozzato ◽  
G. Ruffato ◽  
E. Sovernigo ◽  
A. Sonato
Keyword(s):  
High Throughput ◽  
High Sensitivity ◽  
Controlled Environment ◽  
Biological Applications ◽  
Environment Monitoring ◽  
Lab On Chip ◽  
Sensing Platforms ◽  
Multiple Detection ◽  
On Chip ◽  
Biological Environment

AbstractSurface plasmon resonance biosensors have recently known a rapid diffusion in the biological field and a large variety of sensor configurations is currently available. Biological applications are increasingly demanding sensor miniaturization, multiple detection in parallel, temperature-controlled environment and high sensitivity. Indeed, versatile and tunable sensing platforms, together with an accurate biological environment monitoring, could improve the realization of custom biosensing devices applicable to different biological reactions. Here we propose a smart and high throughput fabrication protocol for the realization of a custommicrofluidic plasmonic biochip that could be easily tuned and modified to address different biological applications. The sensor chip here presented shows a high sensing capability, monitored by an accurate signal calibration in the presence of concentration and temperature variation.

scholarly journals Towards lab-on-chip ultrasensitive ethanol detection using photonic crystal waveguide operating in the mid infrared

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ali Rostamian ◽  
Ehsan Madadi-Kandjani ◽  
Hamed Dalir ◽  
Volker J. Sorger ◽  
Ray T. Chen
Keyword(s):  
Photonic Crystal ◽  
Slow Light ◽  
High Sensitivity ◽  
Guided Wave ◽  
Silicon On Insulator ◽  
Group Index ◽  
Photonic Crystal Waveguide ◽  
Mid Infrared ◽  
Lab On Chip ◽  
On Chip

Abstract Thanks to the unique molecular fingerprints in the mid-infrared spectral region, absorption spectroscopy in this regime has attracted widespread attention in recent years. Contrary to commercially available infrared spectrometers, which are limited by being bulky and cost-intensive, laboratory-on-chip infrared spectrometers can offer sensor advancements including raw sensing performance in addition to use such as enhanced portability. Several platforms have been proposed in the past for on-chip ethanol detection. However, selective sensing with high sensitivity at room temperature has remained a challenge. Here, we experimentally demonstrate an on-chip ethyl alcohol sensor based on a holey photonic crystal waveguide on silicon on insulator-based photonics sensing platform offering an enhanced photoabsorption thus improving sensitivity. This is achieved by designing and engineering an optical slow-light mode with a high group-index of n g  = 73 and a strong localization of modal power in analyte, enabled by the photonic crystal waveguide structure. This approach includes a codesign paradigm that uniquely features an increased effective path length traversed by the guided wave through the to-be-sensed gas analyte. This PIC-based lab-on-chip sensor is exemplary, spectrally designed to operate at the center wavelength of 3.4 μm to match the peak absorbance for ethanol. However, the slow-light enhancement concept is universal offering to cover a wide design-window and spectral ranges towards sensing a plurality of gas species. Using the holey photonic crystal waveguide, we demonstrate the capability of achieving parts per billion levels of gas detection precision. High sensitivity combined with tailorable spectral range along with a compact form-factor enables a new class of portable photonic sensor platforms when combined with integrated with quantum cascade laser and detectors.

scholarly journals Epitaxial Graphene Sensors Combined with 3D Printed Microfluidic Chip for Heavy Metals Detection

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 982 ◽  
Author(s):  
Maria Francesca Santangelo ◽  
Ivan Shtepliuk ◽  
Donatella Puglisi ◽  
Daniel Filippini ◽  
Rositsa Yakimova ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Microfluidic Chip ◽  
Chemical Interaction ◽  
High Sensitivity ◽  
Epitaxial Graphene ◽  
Phase Detection ◽  
Lab On Chip ◽  
Sensing Platform ◽  
3D Printed ◽  
On Chip

Two-dimensional materials may constitute key elements in the development of a sensing platform where extremely high sensitivity is required, since even minimal chemical interaction can generate appreciable changes in the electronic state of the material. In this work, we investigate the sensing performance of epitaxial graphene on Si-face 4H-SiC (EG/SiC) for liquid-phase detection of heavy metals (e.g., Pb). The integration of preparatory steps needed for sample conditioning is included in the sensing platform, exploiting fast prototyping using a 3D printer, which allows direct fabrication of a microfluidic chip incorporating all the features required to connect and execute the Lab-on-chip (LOC) functions. It is demonstrated that interaction of Pb2+ ions in water-based solutions with the EG enhances its conductivity exhibiting a Langmuir correlation between signal and Pb2+ concentration. Several concentrations of Pb2+ solutions ranging from 125 nM to 500 µM were analyzed showing good stability and reproducibility over time.

scholarly journals A novel method to transfer porous PDMS membranes for high throughput Organ-on-Chip and Lab-on-Chip assembly

2018 ◽  
Author(s):  
W.F. Quiros-Solano ◽  
N. Gaio ◽  
C. Silvestri ◽  
Y.B. Arik ◽  
O.M.J.A. Stassen ◽  
...  
Keyword(s):  
High Throughput ◽  
Lab On Chip ◽  
Novel Method ◽  
On Chip

scholarly journals A novel hanging spherical drop system for the generation of cellular spheroids and high throughput combinatorial drug screening

2015 ◽  
Vol 3 (4) ◽  
pp. 581-585 ◽  
Author(s):  
A. I. Neto ◽  
C. R. Correia ◽  
M. B. Oliveira ◽  
M. I. Rial-Hermida ◽  
C. Alvarez-Lorenzo ◽  
...  
Keyword(s):  
High Throughput ◽  
Drug Screening ◽  
Spherical Drop ◽  
Lab On Chip ◽  
Cellular Spheroids ◽  
On Chip ◽  
High Throughput Manner

A novel hanging spherical drop system based on the use of biomimetic superhydrophobic flat substrates allows one to generate arrays of independent spheroid bodies in a high throughput manner, in order to mimic in vivo tumour models on the lab-on-chip scale.

High-throughput acoustofluidic microchannels for single cell rotation

2021 ◽  
Author(s):  
Junwen Zhu ◽  
Qiqian Zhang ◽  
Fei Liang ◽  
Yongxiang Feng ◽  
Wenhui Wang
Keyword(s):  
High Throughput ◽  
Low Cost ◽  
Rotation Velocity ◽  
Microfluidic Channels ◽  
Lab On Chip ◽  
Dead End ◽  
Cell Rotation ◽  
Fabrication Procedure ◽  
On Chip ◽  
Highly Uniform

Abstract There is a growing desire for cell rotation in the field of biophysics, bioengineering and biomedicine. We herein present novel microfluidic channels for simultaneous high-throughput cell self-rotation using local circular streaming generated by ultrasonic wave excited bubble arrays. The bubble traps achieve high homogeneity of liquid-gas interface by setting capillary valves at the entrances of dead-end bubble trappers orthogonal to the main microchannel. In such a highly uniform bubble array, rotation at different fields of bubble-relevant vortices is considered equal and interconvertible. The device is compatible with cells of various size and retains manageable rotation velocity when actuated by signals of varying frequency and voltage. Experimental observations were confirmed consistent with theoretical estimation and numerical simulation. Comparing with the conventional approaches of cell rotation, our device has multiple merits such as high throughput, low cost and simple fabrication procedure, and high compatibility for lab-on-chip integration. Therefore, the platform holds a promise in cell observation, medicine development and biological detection.

scholarly journals High throughput fabrication of disposable nanofluidic lab-on-chip devices for single molecule studies

2012 ◽  
Vol 6 (3) ◽  
pp. 036502 ◽  
Author(s):  
Jeroen A. van Kan ◽  
Ce Zhang ◽  
Piravi Perumal Malar ◽  
Johan R. C. van der Maarel
Keyword(s):  
High Throughput ◽  
Single Molecule ◽  
Lab On Chip ◽  
Single Molecule Studies ◽  
On Chip

scholarly journals Significantly enhanced coupling effect and gap plasmon resonance in a MIM-cavity based sensing structure

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yuan-Fong Chou Chau ◽  
Tan Yu Ming ◽  
Chung-Ting Chou Chao ◽  
Roshan Thotagamuge ◽  
Muhammad Raziq Rahimi Kooh ◽  
...  
Keyword(s):  
Refractive Index ◽  
Plasmon Resonance ◽  
Coupling Effect ◽  
High Sensitivity ◽  
Plasmon Mode ◽  
Plasmonic Sensor ◽  
Lab On Chip ◽  
Silver Nanorods ◽  
Metal Insulator Metal ◽  
On Chip

AbstractHerein, we design a high sensitivity with a multi-mode plasmonic sensor based on the square ring-shaped resonators containing silver nanorods together with a metal–insulator-metal bus waveguide. The finite element method can analyze the structure's transmittance properties and electromagnetic field distributions in detail. Results show that the coupling effect between the bus waveguide and the side-coupled resonator can enhance by generating gap plasmon resonance among the silver nanorods, increasing the cavity plasmon mode in the resonator. The suggested structure obtained a relatively high sensitivity and acceptable figure of merit and quality factor of about 2473 nm/RIU (refractive index unit), 34.18 1/RIU, and 56.35, respectively. Thus, the plasmonic sensor is ideal for lab-on-chip in gas and biochemical analysis and can significantly enhance the sensitivity by 177% compared to the regular one. Furthermore, the designed structure can apply in nanophotonic devices, and the range of the detected refractive index is suitable for gases and fluids (e.g., gas, isopropanol, optical oil, and glucose solution).

scholarly journals In-Situ Integration of 3D C-MEMS Microelectrodes with Bipolar Exfoliated Graphene for Label-Free Electrochemical Cancer Biomarkers Aptasensor

Micromachines ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 104
Author(s):  
Shahrzad Forouzanfar ◽  
Nezih Pala ◽  
Chunlei Wang
Keyword(s):  
High Performance ◽  
Microelectromechanical Systems ◽  
Point Of Care ◽  
High Sensitivity ◽  
Label Free ◽  
Lab On Chip ◽  
Electrochemical Label ◽  
Mems Technology ◽  
On Chip

The electrochemical label-free aptamer-based biosensors (also known as aptasensors) are highly suitable for point-of-care applications. The well-established C-MEMS (carbon microelectromechanical systems) platforms have distinguishing features which are highly suitable for biosensing applications such as low background noise, high capacitance, high stability when exposed to different physical/chemical treatments, biocompatibility, and good electrical conductivity. This study investigates the integration of bipolar exfoliated (BPE) reduced graphene oxide (rGO) with 3D C-MEMS microelectrodes for developing PDGF-BB (platelet-derived growth factor-BB) label-free aptasensors. A simple setup has been used for exfoliation, reduction, and deposition of rGO on the 3D C-MEMS microelectrodes based on the principle of bipolar electrochemistry of graphite in deionized water. The electrochemical bipolar exfoliation of rGO resolves the drawbacks of commonly applied methods for synthesis and deposition of rGO, such as requiring complicated and costly processes, excessive use of harsh chemicals, and complex subsequent deposition procedures. The PDGF-BB affinity aptamers were covalently immobilized by binding amino-tag terminated aptamers and rGO surfaces. The turn-off sensing strategy was implemented by measuring the areal capacitance from CV plots. The aptasensor showed a wide linear range of 1 pM–10 nM, high sensitivity of 3.09 mF cm−2 Logc−1 (unit of c, pM), and a low detection limit of 0.75 pM. This study demonstrated the successful and novel in-situ deposition of BPE-rGO on 3D C-MEMS microelectrodes. Considering the BPE technique’s simplicity and efficiency, along with the high potential of C-MEMS technology, this novel procedure is highly promising for developing high-performance graphene-based viable lab-on-chip and point-of-care cancer diagnosis technologies.

Sign in / Sign up

Export Citation Format

Share Document