Separation of phenols from oils using deep eutectic solvents and ionic liquids

2020 ◽  
Vol 92 (10) ◽  
pp. 1717-1731
Author(s):  
Yucui Hou ◽  
Zhi Feng ◽  
Jaime Ruben Sossa Cuellar ◽  
Weize Wu
Keyword(s):  
Ionic Liquids ◽  
Phenolic Compounds ◽  
High Efficiency ◽  
Deep Eutectic Solvents ◽  
Environmentally Benign ◽  
Organic Chemical ◽  
Environmental Friendliness ◽  
Oil Mixtures ◽  
Organic Chemical Industry

AbstractPhenolic compounds are important basic materials for the organic chemical industry, such as pesticides, medicines and preservatives. Phenolic compounds can be obtained from biomass, coal and petroleum via pyrolysis and liquefaction, but they are mixtures in oil. The traditional methods to separate phenols from oil using alkaline washing are not environmentally benign. To solve the problems, deep eutectic solvents (DESs) and ionic liquids (ILs) have been developed to separate phenols from oil, which shows high efficiency and environmental friendliness. In this article, we summarized the properties of DESs and ILs and the applications of DESs and ILs in the separation of phenols and oil. There are two ways in which DESs and ILs are used in these applications: (1) DESs formed in situ using different hydrogen bonding acceptors including quaternary ammonium salts, zwitterions, imidazoles and amides; (2) DESs and ILs used as extractants. The effect of water on the separation, mass transfer dynamics in the separation process, removal of neutral oil entrained in DESs, phase diagrams of phenol + oil + extractant during extraction, are also discussed. In the last, we analyze general trends for the separation and evaluate the problematic or challenging aspects in the separation of phenols from oil mixtures.

scholarly journals Ionic liquids and deep eutectic solvents for the recovery of phenolic compounds: effect of ionic liquids structure and process parameters

RSC Advances ◽  
2021 ◽  
Vol 11 (20) ◽  
pp. 12398-12422
Author(s):  
Amir Sada Khan ◽  
Taleb H. Ibrahim ◽  
Nabil Abdel Jabbar ◽  
Mustafa I. Khamis ◽  
Paul Nancarrow ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Phenolic Compounds ◽  
Liquid Phase ◽  
Aqueous Phase ◽  
Process Parameters ◽  
Deep Eutectic Solvents

Extraction of phenol from aqueous phase to ionic liquid phase.

Separation of phenolic compounds from oil mixtures by betaine‐based deep eutectic solvents

2020 ◽  
Vol 15 (6) ◽  
Author(s):  
Guangsheng Li ◽  
Qiang Xie ◽  
Qian Liu ◽  
Jinchang Liu ◽  
Chaoran Wan ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Deep Eutectic Solvents ◽  
Oil Mixtures

scholarly journals Influence of Casting Solvents on CO2/CH4 Separation Using Polysulfone Membranes

Membranes ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 286
Author(s):  
Roba M. Almuhtaseb ◽  
Ahmed Awadallah-F ◽  
Shaheen A. Al-Muhtaseb ◽  
Majeda Khraisheh
Keyword(s):  
High Efficiency ◽  
In Situ Synthesis ◽  
Separation Process ◽  
Polymeric Membranes ◽  
Gas Mixture ◽  
Manufacturing Cost ◽  
Binary Gas Mixture ◽  
Maximum Permeability ◽  
Polysulfone Membranes

Polysulfone membranes exhibit resistance to high temperature with low manufacturing cost and high efficiency in the separation process. The composition of gases is an important step that estimates the efficiency of separation in membranes. As membrane types are currently becoming in demand for CO2/CH4 segregation, polysulfone will be an advantageous alternative to have in further studies. Therefore, research is undertaken in this study to evaluate two solvents: chloroform (CF) and tetrahydrofuran (THF). These solvents are tested for casting polymeric membranes from polysulfone (PSF) to separate every single component from a binary gas mixture of CO2/CH4. In addition, the effect of gas pressure was conducted from 1 to 10 bar on the behavior of the permeability and selectivity. The results refer to the fact that the maximum permeability of CO2 and CH4 for THF is 62.32 and 2.06 barrer at 1 and 2 bars, respectively. Further, the maximum permeability of CF is 57.59 and 2.12 barrer at 1 and 2 bars, respectively. The outcome selectivity values are 48 and 36 for THF and CF at 1 bar, accordingly. Furthermore, the study declares that with the increase in pressure, the permeability and selectivity values drop for CF and THF. The performance for polysulfone (PSF) membrane that is manufactured with THF is superior to that of CF relative to the Robeson upper bound. Therefore, through the results, it can be deduced that the solvent during in-situ synthesis has a significant influence on the gas separation of a binary mixture of CO2/CH4.

scholarly journals Kinetic resolution of indolines by asymmetric hydroxylamine formation

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Gang Wang ◽  
Ran Lu ◽  
Chuangchuang He ◽  
Lei Liu
Keyword(s):  
Hydrogen Peroxide ◽  
Chemical Synthesis ◽  
Late Stage ◽  
Kinetic Resolution ◽  
High Efficiency ◽  
Bond Formation ◽  
Bioactive Molecules ◽  
Environmentally Benign ◽  
Secondary Amines

AbstractCatalytic kinetic resolution of amines represents a longstanding challenge in chemical synthesis. Here, we described a kinetic resolution of secondary amines through oxygenation to produce enantiopure hydroxylamines involving N–O bond formation. The economic and practical titanium-catalyzed asymmetric oxygenation with environmentally benign hydrogen peroxide as oxidant is applicable to a range of racemic indolines with multiple stereocenters and diverse substituent patterns in high efficiency with efficient chemoselectivity and enantio-discrimination. Late-stage asymmetric oxygenation of bioactive molecules that are otherwise difficult to synthesize was also explored.

scholarly journals Inorganic Synthesis Using Reactions of Ionic Liquids and Deep Eutectic Solvents

2021 ◽  
Author(s):  
Tao Zhang ◽  
Thomas Doert ◽  
Hui Wang ◽  
Suojiang Zhang ◽  
Michael Ruck
Keyword(s):  
Ionic Liquids ◽  
Deep Eutectic Solvents ◽  
Inorganic Synthesis
Sign in / Sign up

Export Citation Format

Share Document